Lesson plan
REFPROP
REFPROP is a software program for the prediction of thermophysical properties of fluids, developed by the National Institute of Standards and Technology (NIST). The primary component of REFPROP is an equation of state for each implemented fluid. For most pure fluids, the equation of state is obtained by fitting an expression for the Helmholtz free energy to experimental data. This formulation allows the computation of all equilibrium properties of the fluid, such as density, temperature, pressure, sound speed, heat capacity, second virial coefficients, vapor pressures, saturated liquid and vapor densities, enthalpy of vaporization, entropy, and the Joule-Thomson coefficient. REFPROP also predicts surface tension, viscosity, and thermal conductivity for many fluids, either using extended corresponding states formulations or fluid-specific equations fit directly to experimental data. Various methods are used to compute the analogous properties of fluid mixtures. The full list of fluids properties implemented in REFPROP v10.0 can be found in Table 2 of Huber, et al. (2022).
Article summary
REFPROP is a software program for the prediction of thermophysical properties of fluids, developed by the National Institute of Standards and Technology (NIST). The primary component of REFPROP is an equation of state for each implemented fluid. For most pure fluids, the equation of state is obtained by fitting an expression for the Helmholtz free energy to experimental data. This formulation allows the computation of all equilibrium properties of the fluid, such as density, temperature, pressure, sound speed, heat capacity, second virial coefficients, vapor pressures, saturated liquid and vapor densities, enthalpy of vaporization, entropy, and the Joule-Thomson coefficient. REFPROP also predicts surface tension, viscosity, and thermal conductivity for many fluids, either using extended corresponding states formulations or fluid-specific equations fit directly to experimental data. Various methods are used to compute the analogous properties of fluid mixtures. The full list of fluids properties implemented in REFPROP v10.0 can be found in Table 2 of Huber, et al. (2022).
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.