Lesson plan
Register–memory architecture
In computer engineering, a register–memory architecture is an instruction set architecture that allows operations to be performed on (or from) memory, as well as registers. If the architecture allows all operands to be in memory or in registers, or in combinations, it is called a "register plus memory" architecture. In a register–memory approach one of the operands for operations such as the ADD operation may be in memory, while the other is in a register. This differs from a load–store architecture (used by RISC designs such as MIPS) in which both operands for an ADD operation must be in registers before the ADD. Example of Load-Store (RISC) ;Add mem1 to mem2 mov r1, [mem1] ; Load first value into register mov r2, [mem2] ; Load second value into register add r2, r1, r2 ; r2 = r1 + r2 mov [mem2],r2 ; Store result Example of register-memory (CISC) Some register-memory machines cannot write ALU results to memory, only their registers.…
Article summary
In computer engineering, a register–memory architecture is an instruction set architecture that allows operations to be performed on (or from) memory, as well as registers. If the architecture allows all operands to be in memory or in registers, or in combinations, it is called a "register plus memory" architecture. In a register–memory approach one of the operands for operations such as the ADD operation may be in memory, while the other is in a register. This differs from a load–store architecture (used by RISC designs such as MIPS) in which both operands for an ADD operation must be in registers before the ADD. Example of Load-Store (RISC) ;Add mem1 to mem2 mov r1, [mem1] ; Load first value into register mov r2, [mem2] ; Load second value into register add r2, r1, r2 ; r2 = r1 + r2 mov [mem2],r2 ; Store result Example of register-memory (CISC) Some register-memory machines cannot write ALU results to memory, only their registers.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.