Lesson plan

Relative density

{{Infobox physical quantity | name = Specific gravity | unit = Unitless | symbols = \mathrm{RD} , \mathrm{SG} | derivations = \mathrm{RD} = \frac {\rho_\mathrm{sample}}{\rho_\mathrm{H_2O}} }} Aviation boatswain's mate tests the relative density of JP-5 fuel Relative density, also called specific gravity, is a dimensionless quantity defined as the ratio of the density (mass divided by volume) of a substance to the density of a given reference material. The relative density of solids and liquids is nearly always measured with respect to water at its densest (at ); for gases, the reference is air at room temperature ( ). The term "relative density" (abbreviated r.d. or RD) is preferred modern use, for example in ISO, IUPAC, and NIST, while the term "specific gravity" (abbreviated S.G. or SG) is gradually being abandoned. If a substance's relative density is less than 1 then it is less dense than the reference; if greater than 1 then it is denser than the reference. If the relative density is exactly 1 then the densities are equal; that is, equal volumes of the two substances have the same mass. If the reference material is water, then a substance with a relative density less than 1 will float in water. For example, an ice cube, with a relative density of about 0.91, will float. A substance with a relative density greater than 1 will sink.…

Back to article

Article summary

{{Infobox physical quantity | name = Specific gravity | unit = Unitless | symbols = \mathrm{RD} , \mathrm{SG} | derivations = \mathrm{RD} = \frac {\rho_\mathrm{sample}}{\rho_\mathrm{H_2O}} }} Aviation boatswain's mate tests the relative density of JP-5 fuel Relative density, also called specific gravity, is a dimensionless quantity defined as the ratio of the density (mass divided by volume) of a substance to the density of a given reference material. The relative density of solids and liquids is nearly always measured with respect to water at its densest (at ); for gases, the reference is air at room temperature ( ). The term "relative density" (abbreviated r.d. or RD) is preferred modern use, for example in ISO, IUPAC, and NIST, while the term "specific gravity" (abbreviated S.G. or SG) is gradually being abandoned. If a substance's relative density is less than 1 then it is less dense than the reference; if greater than 1 then it is denser than the reference. If the relative density is exactly 1 then the densities are equal; that is, equal volumes of the two substances have the same mass. If the reference material is water, then a substance with a relative density less than 1 will float in water. For example, an ice cube, with a relative density of about 0.91, will float. A substance with a relative density greater than 1 will sink.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.