RepRap Ormerod

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The RepRap Ormerod is an open-source fused deposition modeling 3D printer and is part of the RepRap project. The RepRap Ormerod is named after the English entomologist Eleanor Anne Ormerod, it was designed by RepRapPro.[1][2] There have been two versions of the Ormerod, the Ormerod 1 was released in December 2013 and the Ormerod 2 released in December 2014.[1][2][3]

The RepRap Ormerod has a 200 mm × 200 mm × 200 mm build volume, uses a Bowden extruder, it also has a micro SD card and USB and Ethernet connections allowing it to be connected to a network.[1][2] The printer was praised for the simplicity of construction and its low cost.[2]

See also

edit edit source

References

edit edit source
  1. ^ a b c "RepRapPro launches affordable Ormerod full 3D printer kit". Retrieved 13 July 2016.
  2. ^ a b c d "RS RepRapPro Ormerod 3D printer could be world's cheapest, and it's self-replicating to boot - Pocket-lint". www.pocket-lint.com. 2 December 2013. Retrieved 13 July 2016.
  3. ^ "New RepRapPro Ormerod 2 Kits Are Now Available for Purchase". 25 September 2014. Retrieved 13 July 2016.
edit edit source

Text derived from https://en.wikipedia.org/w/index.php?oldid=1290725612 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “RepRap Ormerod” revision 1290725612 · retrieved 2026-10-20 release date (×1) · confidence 0.95 revision URL