Reprringer

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Reprringer is a 3D printed pepperbox firearm, made public around September 2013. It is a 5-shot, single-action, manually-indexed .22 CB Cap revolver.

The Reprringer is a 3D printed pepperbox firearm, made public around September 2013. It is a 5-shot, single-action, manually-indexed .22 CB Cap revolver.

Design

Unlike the many early 3D-printed firearm designs, which are usually massively overbuilt in order to withstand the pressures and strain on the material from modern gunpowder cartridges, the Reprringer is small and only slightly larger than a gun made from steel. It is chambered for .22 CB Cap which is considered the least powerful commercially produced cartridge on the market. The barrels are not rifled, the lack of theoretical accuracy is considered a non-issue in a small gun with no sights.

See also

List of notable 3D printed weapons and parts

References

External links

Reprringer_Hexen__v3.0_Derringer_Pepperbox_Gun-franco

Text derived from https://en.wikipedia.org/w/index.php?oldid=1265213165 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.