Lesson plan

Resaw

. A resaw is a large band saw optimized for cutting timber along the grain to reduce larger sections into smaller sections or veneers. Resawing veneers requires a wide blade – commonly – with a small kerf to minimize waste. Resaw blades of up to may be fitted to a standard band saw. Many small and medium-sized sawmills use to band saw blades. Timber mills use larger resaws to ripcut large planks into smaller sizes. A typical mill sized resaw blade is eight inches wide and made with 16 gauge steel. Resaw blades can be identified by their straight back, as opposed to headsaws and doublecut blades, which have notched or toothed backs.

Back to article

Article summary

. A resaw is a large band saw optimized for cutting timber along the grain to reduce larger sections into smaller sections or veneers. Resawing veneers requires a wide blade – commonly – with a small kerf to minimize waste. Resaw blades of up to may be fitted to a standard band saw. Many small and medium-sized sawmills use to band saw blades. Timber mills use larger resaws to ripcut large planks into smaller sizes. A typical mill sized resaw blade is eight inches wide and made with 16 gauge steel. Resaw blades can be identified by their straight back, as opposed to headsaws and doublecut blades, which have notched or toothed backs.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.