Resilient Ethernet Protocol

Resilient Ethernet Protocol (REP) is a network protocol developed by Cisco Systems as an alternative to the Rapid Spanning Tree Protocol (STP).

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Resilient Ethernet Protocol (REP) is a network protocol developed by Cisco Systems as an alternative to the Rapid Spanning Tree Protocol (STP). Designed to enhance network reliability, REP mitigates the formation of loops, expedites recovery from link failures, and optimizes convergence times.

It achieves this by managing a collection of ports that form a REP segment, ensuring the absence of bridging loops within that segment and facilitating rapid response to any interruptions in connectivity. A REP segment is essentially a sequence of interconnected ports that share a common segment identifier.

Each segment is composed of regular segment ports and a pair of edge ports configured by the user. Limitations are placed on the configuration: * A single switch is restricted to having at most two ports in the same segment * REP is supported only on Trunk ports.

REP was initially designed to operate with Fast Ethernet (FE 10/100) interfaces, where it boasts a rapid link down detection time of approximately 10 milliseconds (ms) and a network convergence time around 50 ms. However, the performance of REP varies when deployed over different media types. For Fiber Gigabit Ethernet (GE) ports, the link down detection time remains at an expedient 10 ms, similar to that of Fast Ethernet ports.…

Resilient Ethernet Protocol (REP) is a network protocol developed by Cisco Systems as an alternative to the Rapid Spanning Tree Protocol (STP). Designed to enhance network reliability, REP mitigates the formation of loops, expedites recovery from link failures, and optimizes convergence times.

It achieves this by managing a collection of ports that form a REP segment, ensuring the absence of bridging loops within that segment and facilitating rapid response to any interruptions in connectivity. A REP segment is essentially a sequence of interconnected ports that share a common segment identifier.

Each segment is composed of regular segment ports and a pair of edge ports configured by the user. Limitations are placed on the configuration: A single switch is restricted to having at most two ports in the same segment REP is supported only on Trunk ports.

REP was initially designed to operate with Fast Ethernet (FE 10/100) interfaces, where it boasts a rapid link down detection time of approximately 10 milliseconds (ms) and a network convergence time around 50 ms. However, the performance of REP varies when deployed over different media types. For Fiber Gigabit Ethernet (GE) ports, the link down detection time remains at an expedient 10 ms, similar to that of Fast Ethernet ports.

Conversely, when REP is implemented on Gigabit Ethernet copper interfaces, the detection and recovery times for link losses are notably longer, ranging between 750 ms and 350 ms.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1312836986 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.