Lesson plan

Resistograph

Resistograph is a mechanical resistance measurement device, developed by Frank Rinn (since 1986 in Heidelberg, Germany). Driven by a drill motor, a long, thin needle is inserted into a wood log or structural wood beam in order to gain an idea of its density, often to identify areas of substandard structural integrity such as decay. Variations in resistance to torque are recorded by a stylus on graph paper. Newer models may record information digitally but the purpose of the instrument is the same.

Back to article

Article summary

Resistograph is a mechanical resistance measurement device, developed by Frank Rinn (since 1986 in Heidelberg, Germany). Driven by a drill motor, a long, thin needle is inserted into a wood log or structural wood beam in order to gain an idea of its density, often to identify areas of substandard structural integrity such as decay. Variations in resistance to torque are recorded by a stylus on graph paper. Newer models may record information digitally but the purpose of the instrument is the same.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.