Resistor ladder
A resistor ladder is an electrical circuit made from repeating units of resistors, in specific configurations.
≈ 2 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A resistor ladder is an electrical circuit made from repeating units of resistors, in specific configurations. An R–2R ladder configuration is a simple and inexpensive way to perform digital-to-analog conversion (DAC), using repetitive arrangements of precise resistor networks in a ladder-like configuration.
R–2R resistor ladder network (digital to analog conversion)
V_{out} = V_{ref} \times \tfrac{D}{2^n} For example, if n =5 (hence 2 = 32) and V ref = 3.3 volts (typical CMOS logic 1 voltage), then V_{out} will vary between 0 volts ( D = 0 = 00000 2 ) and the maximum ( D = 31 = 11111 2 ): V_{out} = (\text{3.3 volts}) \times \tfrac{31}{2^5} = \text{3.196875 volts} with steps (corresponding to D = 1 = 00001 2 ) \Delta V_{out} = (\text{3.3 volts}) \times \tfrac {1}{2^5} = \text{0.103125 volts.} The R–2R ladder is inexpensive and relatively easy to manufacture, since only two resistor values are required (or even one, if R is made by placing a pair of 2R in parallel, or if 2R is made by placing a pair of R in series). It is fast and has fixed output impedance R. The R–2R ladder operates as a string of current dividers, whose output accuracy is solely dependent on how well each resistor is matched to the others.
Small inaccuracies in the MSB resistors can entirely overwhelm the contribution of the LSB resistors. This may result in non-monotonic behavior at major crossings, such as from 01111 2 to 10000 2 . Depending on the type of logic gates used and design of the logic circuits, there may be transitional voltage spikes at such major crossings even with perfect resistor values.
These can be filtered with capacitance at the output node (the consequent reduction in bandwidth may be significant in some applications). Finally, the 2R resistance is in series with the digital-output impedance. High-output-impedance gates (e.g., LVDS) may be unsuitable in some cases.
For all of the above reasons (and doubtless others), this type of DAC tends to be restricted to a relatively small number of bits; although integrated circuits may push the number of bits to 14 or even more, 8 bits or fewer is more typical. The R–2R DAC described above directly outputs a voltage and so is called voltage mode (or sometimes normal mode).
Text derived from https://en.wikipedia.org/w/index.php?oldid=1374676687 under CC BY-SA 4.0; modifications have been made.