Resonance

Uses your system voice; voice and rate in settings.

Q3933433Snapshot

≈ 26 min read

Names in other languages

  • DeutschResonance
  • EnglishResonance
  • EnglishResonance
  • EnglishResonance
  • EspañolResonance
  • ItalianoResonance
  • NederlandsResonance
  • РусскийResonance

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

simple harmonic oscillator. Resonance is a phenomenon that occurs when an object or system is subjected to an external force or vibration whose frequency matches a resonant frequency (or resonance frequency) of the system, defined as a frequency that generates a maximum amplitude response in the system. When this happens, the object or system absorbs energy from the external force and starts vibrating with a larger amplitude. Resonance can occur in various systems, such as mechanical, electrical, or acoustic systems, and it is often desirable in certain applications, such as musical instruments or radio receivers. However, resonance can also be detrimental, leading to excessive vibrations or even structural failure in some cases. All systems, including molecular systems and particles, tend to vibrate at a natural frequency depending upon their structure; when there is very little damping this frequency is approximately equal to, but slightly above, the resonant frequency. When an oscillating force, an external vibration, is applied at a resonant frequency of a dynamic system, object, or particle, the outside vibration will cause the system to oscillate at a higher amplitude (with more force) than when the same force is applied at other, non-resonant frequencies.…

simple harmonic oscillator. Resonance is a phenomenon that occurs when an object or system is subjected to an external force or vibration whose frequency matches a resonant frequency (or resonance frequency) of the system, defined as a frequency that generates a maximum amplitude response in the system. When this happens, the object or system absorbs energy from the external force and starts vibrating with a larger amplitude. Resonance can occur in various systems, such as mechanical, electrical, or acoustic systems, and it is often desirable in certain applications, such as musical instruments or radio receivers. However, resonance can also be detrimental, leading to excessive vibrations or even structural failure in some cases. All systems, including molecular systems and particles, tend to vibrate at a natural frequency depending upon their structure; when there is very little damping this frequency is approximately equal to, but slightly above, the resonant frequency. When an oscillating force, an external vibration, is applied at a resonant frequency of a dynamic system, object, or particle, the outside vibration will cause the system to oscillate at a higher amplitude (with more force) than when the same force is applied at other, non-resonant frequencies. The resonant frequencies of a system can be identified when the response to an external vibration creates an amplitude that is a relative maximum within the system. Small periodic forces that are near a resonant frequency of the system have the ability to produce large amplitude oscillations in the system due to the storage of vibrational energy. Resonance phenomena occur with all types of vibrations or waves: there is mechanical resonance, orbital resonance, acoustic resonance, electromagnetic resonance, nuclear magnetic resonance (NMR), electron spin resonance (ESR) and resonance of quantum wave functions. Resonant systems can be used to generate vibrations of a specific frequency (e.g., musical instruments), or pick out specific frequencies from a complex vibration containing many frequencies (e.g., filters). The term resonance (from Latin resonantia, 'echo', from resonare, 'resound') originated from the field of acoustics discussed by Galileo Galilei in his book Dialogues Concerning Two New Sciences, particularly the sympathetic resonance observed in musical instruments, e.g., when one string starts to vibrate and produce sound after a different one is struck.

Overview

Resonance occurs when a system is able to store and easily transfer energy between two or more different storage modes (such as kinetic energy and potential energy in the case of a simple pendulum). However, there are some losses from cycle to cycle, called damping. When damping is small, the resonant frequency is approximately equal to the natural frequency of the system, which is a frequency of unforced vibrations. Some systems have multiple and distinct resonant frequencies.

Examples

is a common example of resonance. The loaded swing, a pendulum, has a natural frequency of oscillation, its resonant frequency, and resists being pushed at a faster or slower rate. A familiar example is a playground swing, which acts as a pendulum. Pushing a person in a swing in time with the natural interval of the swing (its resonant frequency) makes the swing go higher and higher (maximum amplitude), while attempts to push the swing at a faster or slower tempo produce smaller arcs. This is because the energy the swing absorbs is maximized when the pushes match the swing's natural oscillations. Resonance occurs widely in nature, and is exploited in many devices. It is the mechanism by which virtually all sinusoidal waves and vibrations are generated. For example, when hard objects like metal, glass, or wood are struck, there are brief resonant vibrations in the object. Light and other short wavelength electromagnetic radiation is produced by resonance on an atomic scale, such as electrons in atoms. Other examples of resonance include: Timekeeping mechanisms of modern clocks and watches, e.g., the balance wheel in a mechanical watch and the quartz crystal in a quartz watch Tidal resonance of the Bay of Fundy Acoustic resonances of musical instruments and the human vocal tract Shattering of a crystal wineglass when exposed to a musical tone of the right pitch (its resonant frequency) Friction idiophones, such as making a glass object (glass, bottle, vase) vibrate by rubbing around its rim with a fingertip Electrical resonance of tuned circuits in radios and TVs that allow radio frequencies to be selectively received Creation of coherent light by optical resonance in a laser cavity Orbital resonance as exemplified by some moons of the Solar System's giant planets and resonant groups such as the plutinos Material resonances in atomic scale are the basis of several spectroscopic techniques that are used in condensed matter physics Electron spin resonance Mössbauer effect Nuclear magnetic resonance

Linear systems

Resonance manifests itself in many linear and nonlinear systems as oscillations around an equilibrium point. When the system is driven by a sinusoidal external input, a measured output of the system may oscillate in response. The ratio of the amplitude of the output's steady-state oscillations to the input's oscillations is called the gain, and the gain can be a function of the frequency of the sinusoidal external input. Peaks in the gain at certain frequencies correspond to resonances, where the amplitude of the measured output's oscillations are disproportionately large. Since many linear and nonlinear systems that oscillate are modeled as harmonic oscillators near their equilibria, a derivation of the resonant frequency for a driven, damped harmonic oscillator is shown. An RLC circuit is used to illustrate connections between resonance and a system's transfer function, frequency response, poles, and zeroes. Building off the RLC circuit example, these connections for higher-order linear systems with multiple inputs and outputs are generalized.

The driven, damped harmonic oscillator

Consider a damped mass on a spring driven by a sinusoidal, externally applied force. Newton's second law takes the form {{NumBlk|| m\frac{\mathrm{d}^2x}{\mathrm{d}t^2} = F_0 \sin(\omega t)-kx-c\frac{\mathrm{d}x}{\mathrm{d}t}, | }} where m is the mass, x is the displacement of the mass from the equilibrium point, F 0 is the driving amplitude, ω is the driving angular frequency, k is the spring constant, and c is the viscous damping coefficient. This can be rewritten in the form {{NumBlk|| \frac{\mathrm{d}^2x}{\mathrm{d}t^2} + 2\zeta\omega_0\frac{\mathrm{d}x}{\mathrm{d}t} + \omega_0^2 x = \frac{F_0}{m} \sin(\omega t), | }} where \omega_0 = \sqrt{k /m} is called the undamped angular frequency of the oscillator or the natural frequency, \zeta = \frac{c}{2\sqrt{mk}} is called the damping ratio. Many sources also refer to ω 0 as the resonant frequency. However, as shown below, when analyzing oscillations of the displacement x(t), the resonant frequency is close to but not the same as ω 0 . In general the resonant frequency is close to but not necessarily the same as the natural frequency. The RLC circuit example in the next section gives examples of different resonant frequencies for the same system. The general solution of Equation ( ) is the sum of a transient solution that depends on initial conditions and a steady state solution that is independent of initial conditions and depends only on the driving amplitude F 0 , driving frequency ω, undamped angular frequency ω 0 , and the damping ratio ζ. The transient solution decays in a relatively short amount of time, so to study resonance it is sufficient to consider the steady state solution. It is possible to write the steady-state solution for x(t) as a function proportional to the driving force with an induced phase change, φ. {{NumBlk|| x(t) = \frac{F_0}{m \sqrt{\left(2\omega\omega_0\zeta\right)^2 + (\omega_0^2 - \omega^2)^2}} \sin(\omega t + \varphi), | }} where \varphi = \arctan\left(\frac{2\omega \omega_0\zeta}{\omega^2 - \omega_0^2} \right) + n\pi. The phase value is usually taken to be between −180° and 0 so it represents a phase lag for both positive and negative values of the arctan argument. Resonance occurs when, at certain driving frequencies, the steady-state amplitude of x(t) is large compared to its amplitude at other driving frequencies. For the mass on a spring, resonance corresponds physically to the mass's oscillations having large displacements from the spring's equilibrium position at certain driving frequencies. Looking at the amplitude of x(t) as a function of the driving frequency ω, the amplitude is maximal at the driving frequency \omega_r = \omega_0 \sqrt{1 - 2\zeta^2}. ω r is the resonant frequency for this system. Again, the resonant frequency does not equal the undamped angular frequency ω 0 of the oscillator. They are proportional, and if the damping ratio goes to zero they are the same, but for non-zero damping they are not the same frequency. As shown in the figure, resonance may also occur at other frequencies near the resonant frequency, including ω 0 , but the maximum response is at the resonant frequency. Also, ω r is only real and non-zero if \zeta , so this system can only resonate when the harmonic oscillator is significantly underdamped. For systems with a very small damping ratio and a driving frequency near the resonant frequency, the steady state oscillations can become very large. \omega_r = \omega_0 \sqrt{1 - 2\zeta^2}, but the definitions of ω 0 and ζ change based on the physics of the system. For a pendulum of length ℓ and small displacement angle θ, Equation ( ) becomes m\ell\frac{\mathrm{d}^2\theta}{\mathrm{d}t^2} = F_0 \sin(\omega t)-mg\theta-c\ell\frac{\mathrm{d}\theta}{\mathrm{d}t} and therefore \omega_0 = \sqrt{\frac{g}{\ell}}, \zeta = \frac{c}{2m}\sqrt{\frac{\ell}{g}}. sLI(s) + RI(s) + \frac{1}{sC}I(s) = V_\text{in}(s), where I(s) and V in (s) are the Laplace transform of the current and input voltage, respectively, and s is a complex frequency parameter in the Laplace domain. Rearranging terms, I(s) = \frac{s}{s^2L + Rs + \frac{1}{C}} V_\text{in}(s).

Voltage across the capacitor

An RLC circuit in series presents several options for where to measure an output voltage. Suppose the output voltage of interest is the voltage drop across the capacitor. As shown above, in the Laplace domain this voltage is V_\text{out}(s) = \frac{1}{sC}I(s) or V_\text{out}= \frac{1}{LC(s^2 + \frac{R}{L}s + \frac{1}{LC})} V_\text{in}(s). Define for this circuit a natural frequency and a damping ratio, \omega_0 = \frac{1}{\sqrt{LC}}, \zeta = \frac{R}{2}\sqrt{\frac{C}{L}}. The ratio of the output voltage to the input voltage becomes H(s) \triangleq \frac{V_\text{out}(s)}{V_\text{in}(s)} = \frac{\omega_0^2}{s^2 + 2\zeta\omega_0s + \omega_0^2} H(s) is the transfer function between the input voltage and the output voltage. This transfer function has two poles–roots of the polynomial in the transfer function's denominator–at and no zeros–roots of the polynomial in the transfer function's numerator. Moreover, for \zeta \le 1 , the magnitude of these poles is the natural frequency ω 0 and that for \zeta , our condition for resonance in the harmonic oscillator example, the poles are closer to the imaginary axis than to the real axis. Evaluating H(s) along the imaginary axis , the transfer function describes the frequency response of this circuit. Equivalently, the frequency response can be analyzed by taking the Fourier transform of Equation ( ) instead of the Laplace transform. The transfer function, which is also complex, can be written as a gain and phase, H(i\omega) = G(\omega)e^{i\Phi(\omega)}. A sinusoidal input voltage at frequency ω results in an output voltage at the same frequency that has been scaled by G(ω) and has a phase shift Φ(ω). The gain and phase can be plotted versus frequency on a Bode plot. For the RLC circuit's capacitor voltage, the gain of the transfer function H(iω) is {{NumBlk|| G(\omega) = \frac{\omega_0^2}{\sqrt{\left(2\omega\omega_0\zeta\right)^2 + (\omega_0^2 - \omega^2)^2}}. | }} Note the similarity between the gain here and the amplitude in Equation ( ). Once again, the gain is maximized at the resonant frequency \omega_r = \omega_0 \sqrt{1 - 2\zeta^2}. Here, the resonance corresponds physically to having a relatively large amplitude for the steady state oscillations of the voltage across the capacitor compared to its amplitude at other driving frequencies. V_\text{out}(s) = sLI(s), V_\text{out}(s) = \frac{s^2}{s^2 + \frac{R}{L}s + \frac{1}{LC}} V_\text{in}(s), V_\text{out}(s) = \frac{s^2}{s^2 + 2\zeta\omega_0s + \omega_0^2} V_\text{in}(s), using the same definitions for ω 0 and ζ as in the previous example. The transfer function between V in (s) and this new V out (s) across the inductor is H(s) = \frac{s^2}{s^2 + 2\zeta\omega_0s + \omega_0^2}. This transfer function has the same poles as the transfer function in the previous example, but it also has two zeroes in the numerator at . Evaluating H(s) along the imaginary axis, its gain becomes G(\omega) = \frac{\omega^2}{\sqrt{\left(2\omega\omega_0\zeta\right)^2 + (\omega_0^2 - \omega^2)^2}}. Compared to the gain in Equation ( ) using the capacitor voltage as the output, this gain has a factor of ω 2 in the numerator and will therefore have a different resonant frequency that maximizes the gain. That frequency is \omega_r = \frac{\omega_0}{\sqrt{1 - 2\zeta^2}}, So for the same RLC circuit but with the voltage across the inductor as the output, the resonant frequency is now larger than the natural frequency, though it still tends towards the natural frequency as the damping ratio goes to zero. That the same circuit can have different resonant frequencies for different choices of output is not contradictory. As shown in Equation ( ), the voltage drop across the circuit is divided among the three circuit elements, and each element has different dynamics. The capacitor's voltage grows slowly by integrating the current over time and is therefore more sensitive to lower frequencies, whereas the inductor's voltage grows when the current changes rapidly and is therefore more sensitive to higher frequencies. While the circuit as a whole has a natural frequency where it tends to oscillate, the different dynamics of each circuit element make each element resonate at a slightly different frequency. V_\text{out}(s) = RI(s), V_\text{out}(s) = \frac{Rs}{L\left(s^2 + \frac{R}{L}s + \frac{1}{LC}\right)} V_\text{in}(s), and using the same natural frequency and damping ratio as in the capacitor example the transfer function is H(s) = \frac{2\zeta\omega_0s}{s^2 + 2\zeta\omega_0s+\omega_0^2}. This transfer function also has the same poles as the previous RLC circuit examples, but it only has one zero in the numerator at s = 0. For this transfer function, its gain is G(\omega) = \frac{2\zeta\omega_0\omega}{\sqrt{\left(2\omega\omega_0\zeta\right)^2 + (\omega_0^2 - \omega^2)^2}}. The resonant frequency that maximizes this gain is \omega_r = \omega_0, and the gain is one at this frequency, so the voltage across the resistor resonates at the circuit's natural frequency and at this frequency the amplitude of the voltage across the resistor equals the input voltage's amplitude. V_\text{out}(s) = (sL+\frac{1}{sC})I(s), V_\text{out}(s) = \frac{s^2+\frac{1}{LC}}{s^2 + \frac{R}{L}s + \frac{1}{LC}} V_\text{in}(s). Using the same natural frequency and damping ratios as the previous examples, the transfer function is H(s) = \frac{s^2+\omega_0^2}{s^2 + 2\zeta\omega_0s + \omega_0^2}. This transfer has the same poles as the previous examples but has zeroes at Evaluating the transfer function along the imaginary axis, its gain is G(\omega) = \frac{\omega_0^2-\omega^2}{\sqrt{\left(2\omega\omega_0\zeta\right)^2 + (\omega_0^2 - \omega^2)^2}}. Rather than look for resonance, i.e., peaks of the gain, notice that the gain goes to zero at ω = ω 0 , which complements our analysis of the resistor's voltage. This is called antiresonance, which has the opposite effect of resonance. Rather than result in outputs that are disproportionately large at this frequency, this circuit with this choice of output has no response at all at this frequency. The frequency that is filtered out corresponds exactly to the zeroes of the transfer function, which were shown in Equation ( ) and were on the imaginary axis. \begin{bmatrix} \dot{x}_1 \\ \dot{x}_2 \\ \dot{x}_3 \end{bmatrix} = A \begin{bmatrix} x_1(t) \\ x_2(t) \\ x_3(t) \end{bmatrix} + B \begin{bmatrix} u_1(t) \\ u_2(t) \\ u_3(t) \end{bmatrix}, \begin{bmatrix} y_1(t) \\ y_2(t) \end{bmatrix} = C \begin{bmatrix} x_1(t) \\ x_2(t) \\ x_3(t) \end{bmatrix} + D \begin{bmatrix} u_1(t) \\ u_2(t) \\ u_3(t) \end{bmatrix}, where u i (t) are the inputs, x i (t) are the state variables, y i (t) are the outputs, and A, B, C, and D are matrices describing the dynamics between the variables. This system has a transfer function matrix whose elements are the transfer functions between the various inputs and outputs. For example, \begin{bmatrix} Y_1(s) \\ Y_2(s) \end{bmatrix} = \begin{bmatrix} H_{11}(s) & H_{12}(s) & H_{13}(s) \\ H_{21}(s) & H_{22}(s) & H_{23}(s) \end{bmatrix} \begin{bmatrix} U_1(s) \\ U_2(s) \\ U_3(s) \end{bmatrix}. Each H ij (s) is a scalar transfer function linking one of the inputs to one of the outputs. The RLC circuit examples above had one input voltage and showed four possible output voltages–across the capacitor, across the inductor, across the resistor, and across the capacitor and inductor combined in series–each with its own transfer function. If the RLC circuit were set up to measure all four of these output voltages, that system would have a 4×1 transfer function matrix linking the single input to each of the four outputs. Evaluated along the imaginary axis, each H ij (iω) can be written as a gain and phase shift, H_{ij}(i\omega) = G_{ij}(\omega)e^{i\Phi_{ij}(\omega)}. Peaks in the gain at certain frequencies correspond to resonances between that transfer function's input and output, assuming the system is stable. Each transfer function H ij (s) can also be written as a fraction whose numerator and denominator are polynomials of s. H_{ij}(s) = \frac{N_{ij}(s)}{D_{ij}(s)}. The complex roots of the numerator are called zeroes, and the complex roots of the denominator are called poles. For a stable system, the positions of these poles and zeroes on the complex plane give some indication of whether the system can resonate or antiresonate and at which frequencies. In particular, any stable or marginally stable, complex conjugate pair of poles with imaginary components can be written in terms of a natural frequency and a damping ratio as s = -\zeta\omega_0 \pm i\omega_0\sqrt{1-\zeta^2}, as in Equation ( ). The natural frequency ω 0 of that pole is the magnitude of the position of the pole on the complex plane and the damping ratio of that pole determines how quickly that oscillation decays. In general, Complex conjugate pairs of poles near the imaginary axis correspond to a peak or resonance in the frequency response in the vicinity of the pole's natural frequency. If the pair of poles is on the imaginary axis, the gain is infinite at that frequency. Complex conjugate pairs of zeroes near the imaginary axis correspond to a notch or antiresonance in the frequency response in the vicinity of the zero's frequency, i.e., the frequency equal to the magnitude of the zero. If the pair of zeroes is on the imaginary axis, the gain is zero at that frequency. In the RLC circuit example, the first generalization relating poles to resonance is observed in Equation ( ). The second generalization relating zeroes to antiresonance is observed in Equation ( ). In the examples of the harmonic oscillator, the RLC circuit capacitor voltage, and the RLC circuit inductor voltage, "poles near the imaginary axis" corresponds to the significantly underdamped condition ζ \sqrt{2} .

Standing waves on a string

(in black), created when two waves moving from left and right meet and superimpose When a string of fixed length is driven at a particular frequency, a wave propagates along the string at the same frequency. The waves reflect off the ends of the string, and eventually a steady state is reached with waves traveling in both directions. The waveform is the superposition of the waves. At certain frequencies, the steady state waveform does not appear to travel along the string. At fixed positions called nodes, the string is never displaced. Between the nodes the string oscillates and exactly halfway between the nodes, at positions called anti-nodes, where the oscillations have their largest amplitude. mode and the first 5 harmonics. For a string of length L with fixed ends, the displacement y(x,t) of the string perpendicular to the x -axis at time t is y(x,t) = 2y_\text{max}\sin(kx) \cos(2\pi ft), where y_\text{max} is the amplitude of the left- and right-traveling waves interfering to form the standing wave, k is the wave number, f is the frequency. The frequencies that resonate and form standing waves relate to the length of the string as f = \frac{nv}{2L}, n = 1,2,3,\dots where v is the speed of the wave and the integer n denotes different modes or harmonics. The standing wave with oscillates at the fundamental frequency and has a wavelength that is twice the length of the string. The possible modes of oscillation form a harmonic series.

Types

Mechanical

Mechanical resonance is the tendency of a mechanical system to absorb more energy when the frequency of its oscillations matches the system's natural frequency of vibration than it does at other frequencies. It may cause violent swaying motions and even catastrophic failure in improperly constructed structures including bridges, buildings, trains, and aircraft. When designing objects, engineers must ensure the mechanical resonance frequencies of the component parts do not match driving vibrational frequencies of motors or other oscillating parts, a phenomenon known as resonance disaster. Avoiding resonance disasters is a major concern in every building, tower, and bridge construction project. As a countermeasure, shock mounts can be installed to absorb resonant frequencies and thus dissipate the absorbed energy. The Taipei 101 building relies on a —a tuned mass damper—to cancel resonance. Furthermore, the structure is designed to resonate at a frequency that does not typically occur. Buildings in seismic zones are often constructed to take into account the oscillating frequencies of expected ground motion. In addition, engineers designing objects having engines must ensure that the mechanical resonant frequencies of the component parts do not match driving vibrational frequencies of the motors or other strongly oscillating parts. Clocks keep time by mechanical resonance in a balance wheel, pendulum, or quartz crystal. The cadence of runners has been hypothesized to be energetically favorable due to resonance between the elastic energy stored in the lower limb and the mass of the runner.

Acoustic

Acoustic resonance is a branch of mechanical resonance that is concerned with the mechanical vibrations across the frequency range of human hearing, in other words sound. For humans, hearing is normally limited to frequencies between about 20 Hz and 20,000 Hz (20 kHz), Many objects and materials act as resonators with resonant frequencies within this range, and when struck vibrate mechanically, pushing on the surrounding air to create sound waves. This is the source of many percussive sounds we hear. Acoustic resonance is an important consideration for instrument builders, as most acoustic instruments use resonators, such as the strings and body of a violin, the length of tube in a flute, and the shape of, and tension on, a drum membrane. Like mechanical resonance, acoustic resonance can result in catastrophic failure of the object at resonance. The classic example of this is breaking a wine glass with sound at the precise resonant frequency of the glass, although this is difficult in practice.

Q factor

The Q factor or quality factor is a dimensionless parameter that describes how under-damped an oscillator or resonator is, and characterizes the bandwidth of a resonator relative to its center frequency. A high value for Q indicates a lower rate of energy loss relative to the stored energy, i.e., the system is lightly damped. The parameter is defined by the equation: Q =2\pi \text{ } \frac{ \text{ maximum energy stored}}{ \text{total energy lost per cycle at resonance}} . The higher the Q factor, the greater the amplitude at the resonant frequency, and the smaller the bandwidth, or range of frequencies around resonance occurs. In electrical resonance, a high-Q circuit in a radio receiver is more difficult to tune, but has greater selectivity, and so would be better at filtering out signals from other stations. High Q oscillators are more stable. Examples that normally have a low Q factor include door closers (Q=0.5). Systems with high Q factors include tuning forks (Q=1000), atomic clocks and lasers (Q≈10 11 ).

Universal resonance curve

values are deviation from center frequency, in units of center frequency divided by 2Q; ordinate is relative amplitude, and phase in cycles; dashed curves compare the range of responses of real two-pole circuits for a Q value of 5; for higher Q values, there is less deviation from the universal curve. Crosses mark the edges of the 3 dB bandwidth (gain 0.707, phase shift 45° or 0.125 cycle). The exact response of a resonance, especially for frequencies far from the resonant frequency, depends on the details of the physical system, and is usually not exactly symmetric about the resonant frequency, as illustrated for the simple harmonic oscillator above. For a lightly damped linear oscillator with a resonance frequency \omega_0 , the intensity of oscillations I when the system is driven with a driving frequency \omega is typically approximated by the following formula that is symmetric about the resonance frequency: I(\omega) \equiv |\chi|^2 \propto \frac{1}{(\omega - \omega_0 )^2 + \left( \frac{\Gamma}{2} \right)^2 }. Where the susceptibility \chi(\omega) links the amplitude of the oscillator to the driving force in frequency space: x(\omega) = \chi(\omega) F(\omega) The intensity is defined as the square of the amplitude of the oscillations. This is a Lorentzian function, or Cauchy distribution, and this response is found in many physical situations involving resonant systems. is a parameter dependent on the damping of the oscillator, and is known as the linewidth of the resonance. Heavily damped oscillators tend to have broad linewidths, and respond to a wider range of driving frequencies around the resonant frequency. The linewidth is inversely proportional to the Q factor, which is a measure of the sharpness of the resonance. In radio engineering and electronics engineering, this approximate symmetric response is known as the universal resonance curve, a concept introduced by Frederick E. Terman in 1932 to simplify the approximate analysis of radio circuits with a range of center frequencies and Q values.

See also

Cymatics Driven harmonic motion Earthquake engineering Electric dipole spin resonance Formant Limbic resonance Nonlinear resonance Normal mode Positive feedback Schumann resonance Simple harmonic motion Stochastic resonance Sympathetic string Resonance (chemistry) Fermi resonance Resonance (particle physics)

Notes

References

External links

The Feynman Lectures on Physics Vol. I Ch. 23: Resonance Resonance - a chapter from an online textbook Greene, Brian, "Resonance in strings". The Elegant Universe, NOVA (PBS) Hyperphysics section on resonance concepts Resonance versus resonant (usage of terms) Wood and Air Resonance in a Harpsichord Breaking glass with sound , including high-speed footage of glass breaking

Text derived from https://en.wikipedia.org/w/index.php?oldid=1370697120 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

15 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.