Lesson plan
Responsive computer-aided design
Responsive computer-aided design (also simplified to responsive design) is an approach to computer-aided design (CAD) that utilizes real-world sensors and data to modify a three-dimensional (3D) computer model. The concept is related to cyber-physical systems through blurring of the virtual and physical worlds, however, applies specifically to the initial digital design of an object prior to production. The process begins with a designer creating a basic design of an object using CAD software with parametric or algorithmic relationships. These relationships are then linked to physical sensors, allowing them to drive changes to the CAD model within the established parameters. Reasons to allow sensors to modify a CAD model include customizing a design to fit a user's anthropometry, assisting people without CAD skills to personalize a design, or automating part of an iterative design process in similar fashion to generative design. Once the sensors have affected the design it may then be manufactured as a one-off piece using a digital fabrication technology, or go through further development by a designer.
Article summary
Responsive computer-aided design (also simplified to responsive design) is an approach to computer-aided design (CAD) that utilizes real-world sensors and data to modify a three-dimensional (3D) computer model. The concept is related to cyber-physical systems through blurring of the virtual and physical worlds, however, applies specifically to the initial digital design of an object prior to production. The process begins with a designer creating a basic design of an object using CAD software with parametric or algorithmic relationships. These relationships are then linked to physical sensors, allowing them to drive changes to the CAD model within the established parameters. Reasons to allow sensors to modify a CAD model include customizing a design to fit a user's anthropometry, assisting people without CAD skills to personalize a design, or automating part of an iterative design process in similar fashion to generative design. Once the sensors have affected the design it may then be manufactured as a one-off piece using a digital fabrication technology, or go through further development by a designer.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.