Lesson plan

Responsivity

Responsivity is a measure of the input–output gain of a detector system. In the specific case of a photodetector, it measures the electrical output per optical input. A photodetector's responsivity is usually expressed in units of amperes or volts per watt of incident radiant power. For a system that responds linearly to its input, there is a unique responsivity. For nonlinear systems, the responsivity is the local slope. Many common photodetectors respond linearly as a function of the incident power. Responsivity is a function of the wavelength of the incident radiation and of the sensor's properties, such as the bandgap of the material of which the photodetector is made. One simple expression for the responsivity R of a photodetector in which an optical signal is converted into an electric current (known as a photocurrent) is : R=\eta\frac{q}{hf}\approx\eta\frac{\lambda_{(\mu m)}}{1.23985(\mu m\times W/A)} where \eta is the quantum efficiency (the conversion efficiency of photons to electrons) of the detector for a given wavelength, q is the electron charge, f is the frequency of the optical signal, and h is the Planck constant. This expression is also given in terms of \lambda , the wavelength of the optical signal, and has the unit of amperes per watt (A/W). The term responsivity is also used to summarize input–output relationship in non-electrical systems.…

Back to article

Article summary

Responsivity is a measure of the input–output gain of a detector system. In the specific case of a photodetector, it measures the electrical output per optical input. A photodetector's responsivity is usually expressed in units of amperes or volts per watt of incident radiant power. For a system that responds linearly to its input, there is a unique responsivity. For nonlinear systems, the responsivity is the local slope. Many common photodetectors respond linearly as a function of the incident power. Responsivity is a function of the wavelength of the incident radiation and of the sensor's properties, such as the bandgap of the material of which the photodetector is made. One simple expression for the responsivity R of a photodetector in which an optical signal is converted into an electric current (known as a photocurrent) is : R=\eta\frac{q}{hf}\approx\eta\frac{\lambda_{(\mu m)}}{1.23985(\mu m\times W/A)} where \eta is the quantum efficiency (the conversion efficiency of photons to electrons) of the detector for a given wavelength, q is the electron charge, f is the frequency of the optical signal, and h is the Planck constant. This expression is also given in terms of \lambda , the wavelength of the optical signal, and has the unit of amperes per watt (A/W). The term responsivity is also used to summarize input–output relationship in non-electrical systems.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.