RF64

RF64 is a BWF-compatible multichannel audio file format enabling file sizes to exceed .

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

RF64 is a BWF-compatible multichannel audio file format enabling file sizes to exceed 4 GiB. It has been specified by the European Broadcasting Union.

The file format is designed to meet the requirements for multichannel sound in broadcasting and audio archiving. It is based on the Microsoft RIFF/WAVE format and Wave Format Extensible for multichannel parameters. Additions are made to the basic specification to allow for more than 4 GB file sizes when needed (the new maximum filesize is now approximately 16 exabytes). The format is transparent to the BWF and all its supplements and chunks. RF64 WAV files typically use the .wav file extension.

RF64 is the basis for ITU recommendation ITU-R BS.2088, which defines a substantially similar standard, BW64, which replaces binary format metadata chunks with extensible XML metadata. EBU Tech 3306 Version 2 (2018) now recommends the use of BW64 format exclusively, to avoid duplication of standards.

Capability

edit edit source

RF64 specifies a maximum of 18 surround channels, stereo down mix channel and bit stream signals with non-PCM coded data can also be stored in the file format. RF64 can be used in the entire programme chain from capture to editing and play out and for short or long term archiving of multichannel files.

Due to the inconsistent usage of CUE data definition, the additional requirement that CUE chunk names be stored in an additional LABL chunk, along with the inherent 32-bit limitation of the CUE chunk pointer index, the 2009 RF64 format also defines a new 'r64m' marker chunk.

Format

edit edit source

In its basic form, the 32-bit chunk size field at offset 4 in the file is set to -1 (0xFFFFFFFF), and immediately following that a new 'ds64' chunk is inserted (before the FMT chunk). This new ds64 chunk will contain the 64-bit sizes of the DATA chunk(s), using a simple sequential table mechanism to point to additional DATA chunks. The first 4 bytes of the file are then changed from 'RIFF' to 'RF64'.

RF64 files define the following extra chunks:

  • "RF64" replaces "RIFF" chunk identifier of BWF/WAV formats
  • ds64, data size 64, first chunk under RF64
  • JUNK, a placeholder for ds64

An RF64 file with a 'bext' chunk becomes an MBWF-file. 'bext' is defined in BWF (ITU-R BS.1352-3).

ITU-R BS.2088, BW64 is mostly compatible with RF64, with the following changes:

  • "BW64" replaces "RF64" chunk identifier
  • axml, from BWF
  • bxml, like "axml" in BWF (ITU-R BS.1352-3), but compressed
  • sxml, sound-related XML data
  • chna, channel info
  • The replacement of bext and ubxt chunks with XML metadata.

See also

edit edit source
  • BWF, Broadcast Wave Format
  • WAV

References

edit edit source

Text derived from https://en.wikipedia.org/w/index.php?oldid=1272964598 under CC BY-SA 4.0; modifications have been made.

Words in each sectionFormatFormatFormat: 172 words172CapabilityCapabilityCapability: 103 words103See alsoSee alsoSee also: 8 words8
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001272964598 · captured 2025-01-31 · ledger · version history

Cite this page as: encyclopegia.org, “RF64”, snapshot enwiki-001272964598. https://encyclopegia.org/a/rf64

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.