Lesson plan
Robert Garbe
Robert Hermann Garbe (pronounced 'Garber') (9 January 1847 – 23 May 1932) was a German railway engineer and chief engineer of the Berlin division in the Prussian state railways from 1895 to 1917. He was especially known for his steam locomotive designs and is described as one of the greatest authorities on the locomotive. He was the first to suggest the use of superheated steam, universally. However, he saw superheated steam as competing with other innovations such as double expansion compound steam engines (he held a grudge against Hannover's August Borries that his pupil Richard Paul Wagner inherited) or combustion chambers. His designs were, on the one hand, simple to maintain and operate; on the other hand, he blocked innovations that every other pre-Reichsbahn state railway used successfully. He held the belief that two coupled axles were enough for any express engine (his masterpiece being the Prussian S 6 class) and trailing axles as in the "Pacific" configuration were unnecessary. The Prussian P 8 class had to be re-designed almost entirely from his design to become successful, and he envisaged it as an express engine. In that way, he is known as one of the key pioneers of locomotive design because of his achievements concerning the use of superheated steam; his image is tarnished, however, by a conservatism that was proven wrong time and again contemporarily (e.g.…
Article summary
Robert Hermann Garbe (pronounced 'Garber') (9 January 1847 – 23 May 1932) was a German railway engineer and chief engineer of the Berlin division in the Prussian state railways from 1895 to 1917. He was especially known for his steam locomotive designs and is described as one of the greatest authorities on the locomotive. He was the first to suggest the use of superheated steam, universally. However, he saw superheated steam as competing with other innovations such as double expansion compound steam engines (he held a grudge against Hannover's August Borries that his pupil Richard Paul Wagner inherited) or combustion chambers. His designs were, on the one hand, simple to maintain and operate; on the other hand, he blocked innovations that every other pre-Reichsbahn state railway used successfully. He held the belief that two coupled axles were enough for any express engine (his masterpiece being the Prussian S 6 class) and trailing axles as in the "Pacific" configuration were unnecessary. The Prussian P 8 class had to be re-designed almost entirely from his design to become successful, and he envisaged it as an express engine. In that way, he is known as one of the key pioneers of locomotive design because of his achievements concerning the use of superheated steam; his image is tarnished, however, by a conservatism that was proven wrong time and again contemporarily (e.g.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.