Rocker cover

Windsor V8 engine with "Cobra Powered by Ford" labeled rocker (valve) cover (lower left) aircraft engine, with the rocker box cover of one cylinder (of the two visible) removed to expose its rocker arms for inspection A rocker cover, or…

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Windsor V8 engine with "Cobra Powered by Ford" labeled rocker (valve) cover (lower left) aircraft engine, with the rocker box cover of one cylinder (of the two visible) removed to expose its rocker arms for inspection A rocker cover, or valve cover (US/Canada) is a cover that encloses the rocker arm in an internal combustion engine, bolting with a gasket seal to the engine head. Engines with more than one head (such as a V8) will have multiple rocker covers.

On engines without rocker arms, such as some overhead cam and most dual overhead cam types, they are known as rocker boxes in the United Kingdom. On modern engines without rocker arms they are internationally known as "valve cover" but are sometimes referred to as a "cam cover" or "timing cover" if they also cover the timing gear(s) and belt or chain.

Very large multi-cylinder engines, such as those used in a ship or in aviation, may have one rocker cover for each cylinder, to make removal and installation more manageable.

Windsor V8 engine with "Cobra Powered by Ford" labeled rocker (valve) cover (lower left)]] aircraft engine, with the rocker box cover of one cylinder (of the two visible) removed to expose its rocker arms for inspection]] A rocker cover, or valve cover (US/Canada) is a cover that encloses the rocker arm in an internal combustion engine, bolting with a gasket seal to the engine head. Engines with more than one head (such as a V8) will have multiple rocker covers.

On engines without rocker arms, such as some overhead cam and most dual overhead cam types, they are known as rocker boxes in the United Kingdom. On modern engines without rocker arms they are internationally known as "valve cover" but are sometimes referred to as a "cam cover" or "timing cover" if they also cover the timing gear(s) and belt or chain.

Very large multi-cylinder engines, such as those used in a ship or in aviation, may have one rocker cover for each cylinder, to make removal and installation more manageable.

History

Rocker covers did not exist in early engines, which had exposed intake and exhaust valves (for ease of lubrication). With the advance of central lubrication rocker covers were added to keep the oil in and dirt out. They are effectively ubiquitous today.

Rocker cover gasket

A rocker cover gasket (valve cover gasket in the US and Canada) is used to seal the joint between the cover and engine head. Failure of the gasket can cause oil to leak from the engine. A head gasket is used to seal the joint between the head and the engine block.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1307096295 under CC BY-SA 4.0; modifications have been made.

Words in each sectionRocker cover gasketRocker cover gasketRocker cover gasket: 73 words73HistoryHistoryHistory: 42 words42
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001307096295 · captured 2025-08-21 · ledger · version history

Cite this page as: encyclopegia.org, “Rocker cover”, snapshot enwiki-001307096295. https://encyclopegia.org/a/rocker-cover

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.