Rose tree

Uses your system voice; voice and rate in settings.

Snapshot

≈ 11 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In computing, a rose tree is the value of a tree data structure with a variable and unbounded number of branches per node. The term is mostly used in the functional programming community, e.g., in the context of the Bird–Meertens formalism. Apart from the multi-branching property, the most essential characteristic of rose trees is the coincidence of bisimilarity with identity: two distinct rose trees are never bisimilar.

In computing, a rose tree is the value of a tree data structure with a variable and unbounded number of branches per node. The term is mostly used in the functional programming community, e.g., in the context of the Bird–Meertens formalism. Apart from the multi-branching property, the most essential characteristic of rose trees is the coincidence of bisimilarity with identity: two distinct rose trees are never bisimilar. We shall call such trees rose trees, a literal translation of rhododendron (Greek = rose, = tree), because of resemblance to the habitus of this shrub, except that the latter does not grow upside-down on the Northern hemisphere. A base entity is an element of a predefined ground set of values (the "tip"-values ). A branching entity (alternatively, a forking entity or a forest entity) is either of the following sub-types: A set of entities. A sequence of entities. A partial map from a predefined set of names to entities. Any of (a)(b)(c) can be empty. Note that (b) can be seen as a special case of (c) – a sequence is just a map from an initial segment of the set \mathbb{N} of natural numbers. A pairing entity is an ordered pair such that is a branching entity and is an element of a predefined set of "label" values. Since a pairing entity can only contain a branching entity as its component, there is an induced division into sub-types (3a), (3b) or (3c) corresponding to sub-types of branching entities. Typically, only some combinations of entity types are used for the construction. The original paper only considers 1+2b ("sequence-forking" rose trees) and 1+2a ("set-forking" rose trees). In later literature, the 1+2b variant is usually introduced by the following definition: data Tree a = Leaf a | Node [Tree a] A rose tree [...] is either a leaf containing a value, or a node that can have an arbitrary list of subtrees . The most common definition used in functional programming (particularly in Haskell) combines 3+2b: data Rose α = Node α [Rose α] An element of Rose α consists of a labelled node together with a list of subtrees . That is, a rose tree is a pairing entity (type 3) whose branching entity is a sequence (thus of type 2b) of rose trees. Sometimes even the combination 1+3b is considered. The following table provides a summary of the most established combinations of entities. Notes: A node of type (1) is an element of the predefined set of ground values. A node of type (1) does not appear as the source of an arrow. A node of type (3) appears as the source of exactly one arrow. The target of the arrow mentioned in (a) is a node of type (2). Two distinct arrows with the same source node of type (2a) have distinct targets. A node is labelled iff it is of type (3). The label belongs to the predefined set . An arrow is labelled by an index from \mathbb{N} if its source node is of type (2b). An arrow is labelled by a name from a predefined set if its source node is of type (2c). Otherwise an arrow is unlabelled. Labels of arrows with the same source node are distinct. Labels of arrows with the same source node of type (2b) form an initial segment of \mathbb{N} . A bisimilarity between apqs and is a relation between nodes such that the roots of and are -related and for every pair of -related nodes, the following are satisfied: The nodes and have the same type. If and are of type (1) then they are identical. If and are of type (3) then they have the same label. For every arrow of whose source node is there exists an arrow of whose source is and the target nodes of and are -related, the labels of and , if defined, are identical. A symmetric condition is satisfied with and interchanged. Two apqs and are said to be bisimilar if there exists a bisimilarity relation for them. This establishes an equivalence relation on the class of all apqs. A rose tree is then some fixed representation of the class of apqs that are bisimilar to some given apq . If the root node of is of type (1) then , thus can be represented by this root node. Otherwise, is a proper class – in this case the representation can be provided by Scott's trick to be the set of those elements of that have the lowest rank. As a result of the above set-theoretic construction, the class of all rose trees is defined, depending on the sets (ground values), (arrow names) and (node labels) as the definitory constituents. Subsequently, the structure of apqs can be carried over to a labelled multidigraph structure over . That is, elements of can themselves be considered as "nodes" with induced type assignment, node labelling and arrows. The class of arrows is a subclass of , that is, arrows are either source-target couples or source-label-target triples according to the type of the source. For every element of there is an induced apq such that is the root node of and the respective sets and of nodes and arrows of are formed by those elements of and that are accessible via a path of arrows starting at . The induced apq is bisimilar to apqs used for the construction of . Recall that is the set of arrow labels ( \mathbb{N} is the set of natural numbers and is the set of arrow names) is the set of node labels, and is the set of ground values. The additional symbols and respectively mean an indicator of a resolvable pathname and the set of type tags, . The map is defined by the following prescription ( denotes the target of ): It can be shown that different rose trees have different pathname maps. For "homogeneous" rose trees there is no need for type tagging, and their pathname map can be defined as summarized below: In each case, there is a simple axiomatization in terms of pathnames: is a non-empty prefix-closed subset of or . In case of , also needs to be "left-sibling-closed" to form a tree domain, see Encoding by sequences. In case of a nested list or a nested dictionary value, if is a pathname that is non-maximal in , then . In particular, a rose tree in the most common "Haskell" sense is just a map from a non-empty prefix-closed and left-sibling-closed set of finite sequences of natural numbers to a set . Such a definition is mostly used outside the branch of functional programming, see Tree (automata theory). Typically, documents that use this definition do not mention the term "rose tree" at all. Notes: data Tree a = Node { rootLabel :: a, -- ^ label value subForest :: [Tree a] -- ^ zero or more child trees } Both examples are contrived so as to demonstrate the concept of "sharing of substructures" which is a distinguished feature of rose trees. In both cases, the labelling function is injective (so that the labels 'a' , 'b' , 'c' or 'd' uniquely identify a subtree / node) which does not need to be satisfied in general. The natural numbers (0,1,2 or 3) along the arrows indicate the zero-based position in which a tree appears in the subForest sequence of a particular "super-tree". As a consequence of possible repetitions in subForest , there can be multiple arrows between nodes. In each of the examples, the rose tree in question is labelled by 'a' and equals the value of the a variable in the code. In both diagrams, the tree is pointed to by a source-less arrow. Well-founded rose tree import Data.Tree main :: IO () main = do let d = Node { rootLabel = 'd', subForest = [] } let c = Node { rootLabel = 'c', subForest = [d] } let b = Node { rootLabel = 'b', subForest = [d,c] } let a = Node { rootLabel = 'a', subForest = [b,c,c,c] } print a Non-well-founded rose tree import Data.Tree main :: IO () main = do let root x = case x of 'a' -> (x,[x,'b']) 'b' -> (x,[x,'c']) 'c' -> (x,[x,'a']) let a = unfoldTree root 'a' putStrLn (take 900 (show a) ++ " ... (and so on)") The first example presents a well-founded rose tree a obtained by an incremental construction. First d is constructed, then c then b and finally a . The rose tree can be represented by the pathname map shown on the left. The second example presents a non-well-founded rose tree a built by a breadth-first constructor unfoldTree . The rose tree is a Moore machine, see notes above. Its pathname map is defined by be respectively equal to or or according to where is the number of occurrences of in . Mapping tree data structures to their values The "tree structures" are those apqs (labelled multidigraphs from the general definition) in which each node is accessible by a unique arrow path. Every rose tree is bisimilar to such a tree structure (since every apq is bisimilar to its unfolding) and every such tree structure is bisimilar to exactly one rose tree which can therefore be regarded as the value of the tree structure. The diagram on the right shows an example of such a structure-to-value mapping. In the upper part of the diagram, a node-labelled ordered tree is displayed, containing 23 nodes. In the lower part, a rose tree is shown that is the value of . (In both and , sibling arrows are implicitly ordered from left to right.) There is an induced subtree-to-subvalue mapping which is partially displayed by blue arrows. Observe that the mapping is many-to-one: distinct tree data structures can have the same value. As a particular consequence, a rose tree in general is not a tree in terms of "subvalue" relationship between its subvalues, see #Terminological_controversy. Obscure meaning of "node". Discrepancy between "tree" and "sharing of substructures". Interestingly, the term "node" does not appear in the original paper except for a single occurrence of "nodes" in an informal paragraph on page 20. In later literature the word is used abundantly. This can already be observed in the quoted comments to the definitions: A rose tree [...] is either a leaf [...] or a node [...] . An element of Rose α consists of a labelled node [...] . In particular, the definition of rose trees in the most common Haskell sense suggests that (within the context of discourse) "node" and "tree" are synonyms. Does it mean that every rose tree is coincident with its root node? If so, is such a property considered specific to rose trees or does it also apply to other trees? Such questions are left unanswered. The (B) problem becomes apparent when looking at the diagrams of the above examples. Both diagrams are faithful in the sense that each node is drawn exactly once. One can immediately see that the underlying graphs are not trees. Using a quotation from Tree (graph theory) The various kinds of data structures referred to as trees in computer science have underlying graphs that are trees in graph theory [...] one can conclude that rose trees in general are not trees in usual meaning known from computer science.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1332048664 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

Extracted from the cited revision's reference blocks; absent citations are not invented.