Roughness length

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

of the line. Roughness length ( z_0 ) is a parameter used when modeling the horizontal mean wind speed near the ground. In wind vertical profile such the log wind profile, the roughness length (with dimension of length and SI unit of metres) is equivalent to the height at which the wind speed theoretically becomes zero in the absence of wind-slowing obstacles and under neutral conditions. In reality, the wind at this height no longer follows a logarithm. It is so named because it is typically related to the height of terrain roughness elements (i.e. protrusions from and/or depressions into the surface). For instance, forests tend to have much larger roughness lengths than tundra. The roughness length does not exactly correspond to any physical length; however, it can be considered as a length-scale representation of the roughness of the surface.

of the line.]] Roughness length ( z_0 ) is a parameter used when modeling the horizontal mean wind speed near the ground. In wind vertical profile such the log wind profile, the roughness length (with dimension of length and SI unit of metres) is equivalent to the height at which the wind speed theoretically becomes zero in the absence of wind-slowing obstacles and under neutral conditions. In reality, the wind at this height no longer follows a logarithm. It is so named because it is typically related to the height of terrain roughness elements (i.e. protrusions from and/or depressions into the surface). For instance, forests tend to have much larger roughness lengths than tundra. The roughness length does not exactly correspond to any physical length; however, it can be considered as a length-scale representation of the roughness of the surface.

Mathematical foundation

The roughness length z_0 appears in the expression for the mean wind speed u_z near the ground derived using the Monin–Obukhov similarity theory: u_z = \frac{u_*}{\kappa} \left[\ln \left(\frac{z-d}{z_0} \right) + \psi \left(\frac{z-d-z_0}{L} \right)\right], where u_* is the friction velocity \kappa is the Von Kármán constant z is the elevation (as measured from the ground) d is the elevation of the displacement plane (as measured from the ground), which is an offset that accounts for wind-slowing obstacles such as buildings, trees, or any other structures which impede flow L is the Monin-Obukhov length (which is defined to be the height at which buoyancy and wind shear are equally effective at creating turbulence) \psi is a correction factor for stability, with \psi = 0 indicating statically neutral conditions. Conditions are statically neutral when the temperature of the air monotonically increases with elevation. In the simplest possible case (statically neutral conditions and no wind-slowing obstacles), the mean wind speed simplifies to: u_z = \frac{u_*}{\kappa} \ln \left(\frac{z}{z_0} \right). This provides a method to calculate the roughness length by measuring the friction velocity and the mean wind velocity (at known elevation) in a given, relatively flat location (under neutral conditions) using an anemometer. In this simplified form, the log wind profile is identical in form to the dimensional law of the wall. If the friction velocity is unknown, one can calculate the surface roughness as follows z_0=\exp\left(\frac{u(z_2)\ln(z_1)-u(z_1)\ln(z_2)}{u(z_2)-u(z_1)}\right) Due to the limitation of observation instruments and the theory of mean values, the levels (z) should be chosen where there is enough difference between the measurement readings. If one has more than two readings, the measurements can be fit to the above equation to find the roughness length. When calculating the surface roughness, the displacement height can be neglected.

Application

As an approximation, the roughness length is approximately one-tenth of the height of the surface roughness elements. For example, short grass of height 0.01 meters has a roughness length of approximately 0.001 meters. Surfaces are rougher if they have more protrusions (e.g. a forest has a larger roughness length than a tundra). Roughness length is an important concept in urban meteorology because tall structures, such as skyscrapers, affect roughness length and wind patterns. For urban areas, the roughness length changes with the wind direction

Relation to other roughness measures

The roughness length is one of many possible measures of the roughness of a surface. For example, in classical mechanics the coefficient of friction is commonly used to measure the roughness of a surface as it relates to the force exerted on another contacted object. And, in fluid dynamics, hydraulic roughness is a measure of the resistance water experiences when flowing over land or through a channel. All of these measures ultimately derive from frictional forces, which result from irregularities on the surfaces of relevance.

References

External links

Aerodynamic Roughness (Length AMS Glossary) Surface Roughness Length Roughness Roughness (AMS Glossary)

See also

Von Kármán constant Monin-Obukhov length Wind profile power laws

Text derived from https://en.wikipedia.org/w/index.php?oldid=1365770874 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

Extracted from the cited revision's reference blocks; absent citations are not invented.