Route availability

locomotive has a somewhat limited Route availability of 8 No. 86 252 at Birmingham New Street railway station. This class has a Route availability of 6. in British Rail large logo livery at Muir of Ord railway station, 1988 with a medium Route availability of 5. No. D9526 (as preserved) at on the West Somerset Railway a low axle load and less limited RA of 4. shunter 01002 inside the shed at Holyhead Breakwater. The withdrawn loco 01001 is just visible at the rear. They had an RA of 1, and thus had the fewest axle load related restrictions put upon them. Route Availability (RA) is the system by which the permanent way and supporting works (bridges, embankments, etc.) of the railway network of Great Britain are graded. All routes are allocated an RA number between 1 and 10. Rolling stock is also allocated an RA (again between 1 and 10) and the RA of a train is the highest RA of any of its elements. The train must have a route availability (RA) lower than or equal to the RA of a line to be allowed to use it. The RA is primarily related to the axle load of the vehicle, although axle spacing is also taken into consideration. In practice it is the locomotive which governs where trains may operate, although many high capacity 4 axle wagons have a high RA when fully loaded.…

locomotive has a somewhat limited Route availability of 8]] No. 86 252 at Birmingham New Street railway station. This class has a Route availability of 6.]] in British Rail large logo livery at Muir of Ord railway station, 1988 with a medium Route availability of 5.]] No. D9526 (as preserved) at on the West Somerset Railway a low axle load and less limited RA of 4.]] shunter 01002 inside the shed at Holyhead Breakwater. The withdrawn loco 01001 is just visible at the rear. They had an RA of 1, and thus had the fewest axle load related restrictions put upon them.]] Route Availability (RA) is the system by which the permanent way and supporting works (bridges, embankments, etc.) of the railway network of Great Britain are graded. All routes are allocated an RA number between 1 and 10. Rolling stock is also allocated an RA (again between 1 and 10) and the RA of a train is the highest RA of any of its elements. The train must have a route availability (RA) lower than or equal to the RA of a line to be allowed to use it. The RA is primarily related to the axle load of the vehicle, although axle spacing is also taken into consideration. In practice it is the locomotive which governs where trains may operate, although many high capacity 4 axle wagons have a high RA when fully loaded. (When considering the operation of trains the loading gauge must also be considered.) The system was first devised by the London and North Eastern Railway, and perpetuated by British Rail to ascertain which locomotives can work on which lines throughout the rail network in Great Britain. Exemptions may be obtained to allow locomotives to operate on lines from which they may otherwise be banned. An exemption might be granted by placing a speed restriction over a weak bridge, for example. ==Historical notes== Before nationalisation the Big Four railway companies had their own classification systems. GWR's system for classification featured a coloured disc painted on the locomotive cab side to indicate its route availability: ==See also== Rail speed limits in the United States#Track classes ==References== ==External links== British Railways Board Group Standard for Route Availability (historical) Network Rail infrastructure capacity 2D53 Introduction to Route Availability and tables Network Rail Information GE/RT8006 Assessment of Compatibility of Rail Vehicle Weights and Underline Bridges (live issues) at RGS Online

Text derived from https://en.wikipedia.org/w/index.php?oldid=1327334603 under CC BY-SA 4.0; modifications have been made.