Route (command)

In computing, route is a command used to view and manipulate the IP routing table in Unix-like and Microsoft Windows operating systems and also in IBM OS/2 and ReactOS.

Uses your system voice; voice and rate in settings.

≈ 4 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In computing, route is a command used to view and manipulate the IP routing table in Unix-like and Microsoft Windows operating systems and also in IBM OS/2 and ReactOS. Manual manipulation of the routing table is characteristic of static routing.

Unix and Unix-like

The command originated in 4.2BSD. It is not part of any UNIX standard, but the BSD interface is widely implemented. Linux contains a version of the originally written by Fred N. van Kempen, later merged with netstat 's codebase (another command originating in 4.2BSD).

It implements an extended syntax compared to the BSD version. In Linux distributions based on 2.2.x Linux kernels, the ifconfig and route commands are operated together to connect a computer to a network, and to define routes between computer networks. Distributions based on later kernels have deprecated ifconfig and route , replacing them with iproute2 .

On macOS, the route utility is present but largely nonfunctional. Displaying the routing table is instead performed via netstat -nr .

Syntax

The BSD syntax is: route [-dnqtv] {add|del|flush|get|monitor} [[modifiers] args] The Linux syntax is: route [-nNvee] [-FC] [ ] # List kernel routing tables route [-v] [-FC] {add|del|flush} ... # Modify routing table for AF. route {-h|--help} [ ] # Detailed usage syntax for specified AF. route {-V|--version} # Display version/author and exit. In other words, the basic route add and route del commands are portable.

Example

user@linux:~$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.101.0 192.168.102.102 255.255.255.0 UG 0 0 0 eth0 192.168.102.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.103.0 192.168.102.102 255.255.255.0 UG 0 0 0 eth0 192.168.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.12.1 0.0.0.0 UG 0 0 0 eth0

Microsoft Windows

The command is only available if the TCP/IP protocol is installed as a component in the properties of a network adapter.

Syntax

The command-syntax is: route [-f] [-p] [-4|-6] [Command [Destination] [mask Netmask] [Gateway] metric Metric if Interface

Parameters

-f : Clears the routing table -p : The route is added to the Windows Registry and is used to initialize the IP routing table whenever the TCP/IP protocol is started (only when used with the add command) Command : The command to run ( add , change , delete , print ) -4 : Force using IPv4 -6 : Force using IPv6 Destination : Network destination of the route mask Netmask : The netmask (subnet mask) associated with the network destination Gateway : The forwarding or next hop IP address over which the set of addresses defined by the network destination and subnet mask are reachable metric Metric : Integer cost metric (ranging from 1 to 9999) for the route if Interface : The index of the interface over which the destination is reachable /? : Command help The -p parameter is only supported on Windows NT 4.0, Windows 2000, Windows Millennium Edition, and Windows XP. It is not supported on Windows 95 or Windows 98.

Syntax

The command-syntax is: route [-nqv] [COMMAND] [[MODIFIERS] args]

Parameters

-n : Bypasses translating IP addresses to symbolic host names -q : Suppresses all output -v : Verbose COMMAND : The command to run ( add , delete , change , get , monitor , flush ) -net : is a network address -host : is host name or address (default) -netmask : the mask of the route : IP address or host name of the destination : IP address or host name of the next-hop router

ReactOS

ReactOS is an open-source Windows clone. The implementation will eventually cover all options supported by Windows, but the current (as of 2025) version does not. It instead implements a subset of the options, a "poor man's route":

Syntax

Print the route table: route print Add a route: route add [mask ] [metric ] Delete a route: route delete

See also

Routing table Internet Protocol Suite iproute2 BusyBox

route - on technet.microsoft.com

Text derived from https://en.wikipedia.org/w/index.php?oldid=1353523640 under CC BY-SA 4.0; modifications have been made.

Words in each sectionUnix and Unix-likeUnix and Unix-likeUnix and Unix-like: 291 words291Microsoft WindowsMicrosoft WindowsMicrosoft Windows: 264 words264ReactOSReactOSReactOS: 60 words60See alsoSee alsoSee also: 7 words7
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001353523640 · captured 2026-05-10 · ledger · version history

Cite this page as: encyclopegia.org, “Route (command)”, snapshot enwiki-001353523640. https://encyclopegia.org/a/route-command

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.