Lesson plan

RS-366

connector, used in the RS-366 standard. In telecommunications, RS-366, later known as EIA-366, defines a standard for serial communications between computers and an auto dialer, which is used to dial telephones. It was intended to be used to automate the operation of modems. The standard uses the same DB25 connectors and electrical signalling standards of the well-known RS-232 standard, which RS-366 was designed to support. The CCITT had a matching standard, V.25. The earliest modems were used in the SAGE system that automated the collection of radar data, digitized it, and sent it over modems on leased lines to the SAGE computers. Modems were soon being used in business roles, notably in the SABRE that was patterned on the SAGE system. In these roles, the connections were always to the same remote machine, so there was no need to dial the phone, only connect and disconnect. There were some business cases for automated dialling, but these tended to be mission specific. One common example was for a bank's central computer to call out to branches to retrieve transactions, thus centralizing the phone costs at the computer site rather than each branch. As these were highly customized applications, this lent itself to the development of a variety of incompatible systems. RS-366 was an effort to standardize the communications with these dialler systems.…

Back to article

Article summary

connector, used in the RS-366 standard. In telecommunications, RS-366, later known as EIA-366, defines a standard for serial communications between computers and an auto dialer, which is used to dial telephones. It was intended to be used to automate the operation of modems. The standard uses the same DB25 connectors and electrical signalling standards of the well-known RS-232 standard, which RS-366 was designed to support. The CCITT had a matching standard, V.25. The earliest modems were used in the SAGE system that automated the collection of radar data, digitized it, and sent it over modems on leased lines to the SAGE computers. Modems were soon being used in business roles, notably in the SABRE that was patterned on the SAGE system. In these roles, the connections were always to the same remote machine, so there was no need to dial the phone, only connect and disconnect. There were some business cases for automated dialling, but these tended to be mission specific. One common example was for a bank's central computer to call out to branches to retrieve transactions, thus centralizing the phone costs at the computer site rather than each branch. As these were highly customized applications, this lent itself to the development of a variety of incompatible systems. RS-366 was an effort to standardize the communications with these dialler systems.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.