RS-422
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
RS-422, also known as TIA/EIA-422, is a technical standard originated by the Electronic Industries Alliance, first issued in 1975, that specifies the electrical characteristics of a digital signaling circuit. It was meant to be the foundation of a suite of standards that would replace the older RS-232C standard with standards that offered much higher speed, better immunity from noise, and longer cable lengths. RS-422 systems can transmit data at rates as high as 10 Mbit/s, or may be sent on cables as long as at lower rates.
It is closely related to RS-423, which uses the same signaling systems but on a different wiring arrangement. RS-422 specifies differential signaling, with every data line paired with a dedicated return line. It is the voltage difference between these two lines that defines the mark and space, rather than, as in RS-232, the difference in voltage between a data line and a local ground. As the ground voltage can differ at either end of the cable, this required RS-232 to use signals with greater voltages than RS-422.
Using dedicated return lines and always defining ground in reference to the sender allows RS-422 to use lower voltages, allowing it to run at much higher speeds. RS-423 differs primarily in that it has a single return pin instead of one for each data pin.
RS-422, also known as TIA/EIA-422, is a technical standard originated by the Electronic Industries Alliance, first issued in 1975, that specifies the electrical characteristics of a digital signaling circuit. It was meant to be the foundation of a suite of standards that would replace the older RS-232C standard with standards that offered much higher speed, better immunity from noise, and longer cable lengths. RS-422 systems can transmit data at rates as high as 10 Mbit/s, or may be sent on cables as long as at lower rates.
It is closely related to RS-423, which uses the same signaling systems but on a different wiring arrangement. RS-422 specifies differential signaling, with every data line paired with a dedicated return line. It is the voltage difference between these two lines that defines the mark and space, rather than, as in RS-232, the difference in voltage between a data line and a local ground. As the ground voltage can differ at either end of the cable, this required RS-232 to use signals with greater voltages than RS-422.
Using dedicated return lines and always defining ground in reference to the sender allows RS-422 to use lower voltages, allowing it to run at much higher speeds. RS-423 differs primarily in that it has a single return pin instead of one for each data pin.
Standard scope
RS-422 is the common short form title of the American National Standards Institute (ANSI) standard ANSI/TIA/EIA-422-B Electrical Characteristics of Balanced Voltage Differential Interface Circuits and its international equivalent ITU-T Recommendation T-REC-V.11, also known as X.27. These technical standards specify the electrical characteristics of the balanced voltage digital interface circuit. RS-422 provides for data transmission, using balanced, or differential, signaling, with unidirectional/non-reversible, terminated or non-terminated transmission lines, point to point, or multi-drop. In contrast to EIA-485, RS-422/V.11 does not allow multiple drivers but only multiple receivers. The first version of RS-422 was issued in 1975, with revision A issued in December 1978. Revision B, published in May 19941 was reaffirmed by the Telecommunications Industry Association in 2005.
See also
Differential TTL List of network buses Fieldbus Profibus
References
Text derived from https://en.wikipedia.org/w/index.php?oldid=1368713175 under CC BY-SA 4.0; modifications have been made.
References
- ↩Wikipedia “RS-422” publication date (×1) · confidence 0.95 revision URL