SBB Bem 550

The Bem 550 were a series of standard gauge EMU formerly operated by Swiss Federal Railways on the Geneva - line between 1994 and 2014.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Bem 550 were a series of standard gauge EMU formerly operated by Swiss Federal Railways on the Geneva - line between 1994 and 2014. They was equipped to run with French electric power (1500 V DC) and signalling systems. They were built in 1994, based on the Lausanne Metro Line M1 EMUs, by the Ateliers de Constructions Mécaniques de Vevey in Villeneuve, with electrical equipment provided by ABB.

History

The Bem 550s (or Bem 4/6 as they were originally known) were built to replace the two ageing and notoriously unreliable BDe 4/4 II railcars for the Geneva – la Plaine service, and introduced in 1995 under the Rhône Express Regional brand. With increasing demand for both Geneva – la Plaine and Geneva – Bellegarde services in 2001, the Bem 550 units were modified (at a cost of ) to allow them to run beyond la Plaine to Bellegarde.

In 2014 the Bellegarde-Geneva section of the Lyon – Geneva railway was re-electrified at 25 kV AC 50 Hz. The Bem 550 vehicles were thus unable to operate in electric mode on the modernised tracks, but only in diesel mode, and were withdrawn from service on the Geneva-Bellegarde line.

Since 2014 there are no longer any standard gauge mainline railway lines electrified at 1500 V DC in Switzerland.

Technical details

The Bem 550 consists of two carriages, each with three swing-out doors (two doors on one side, one door on the other). There is a driving position at each end, with a large windscreen and side windows. The driver sits on the right hand side in the direction of travel.

The Bem 550 is equipped for one-handed operation, meaning that driver can drive and brake with one control. It draws traction current though a single-armed pantograph. It is also equipped with an 88 kW diesel engine to enable it to drive to maintenance and storage sheds under Swiss standard 15 kV AC catenary.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1353108522 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.