Lesson plan
Scan chain
Scan chain is a technique used in design for testing (DFT). The objective is to make testing easier by providing a simple way to set and observe every flip-flop in an IC. It simplifies the testing and debugging of complex digital systems. In scan-based design, flip-flops operate in two distinct modes: normal mode and scan mode. In normal mode, they support regular system operations. In scan mode, however, they are reconfigured into one long shift register, known as a Scan Chain. The basic structure of scan include the following set of signals in order to control and observe the scan mechanism. # Scan_in (SI) and Scan_out (SO) define the input and output of a scan chain. In a full scan mode usually each input drives only one chain and scan out observe one as well. # A scan enable (SE) pin is a special signal that is added to a design. When this signal is asserted, every flip-flop in the design is connected into a long shift register. # Clock signal which is used for controlling all the flip-flops in the chain during shift phase and the capture phase. An arbitrary pattern can be entered into the chain of flip-flops, and the state of every flip-flop can be read out.
Article summary
Scan chain is a technique used in design for testing (DFT). The objective is to make testing easier by providing a simple way to set and observe every flip-flop in an IC. It simplifies the testing and debugging of complex digital systems. In scan-based design, flip-flops operate in two distinct modes: normal mode and scan mode. In normal mode, they support regular system operations. In scan mode, however, they are reconfigured into one long shift register, known as a Scan Chain. The basic structure of scan include the following set of signals in order to control and observe the scan mechanism. # Scan_in (SI) and Scan_out (SO) define the input and output of a scan chain. In a full scan mode usually each input drives only one chain and scan out observe one as well. # A scan enable (SE) pin is a special signal that is added to a design. When this signal is asserted, every flip-flop in the design is connected into a long shift register. # Clock signal which is used for controlling all the flip-flops in the chain during shift phase and the capture phase. An arbitrary pattern can be entered into the chain of flip-flops, and the state of every flip-flop can be read out.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.