scanning tunneling microscope
type of electron microscope used for looking at atoms
≈ 18 min read
Names in other languages
- bsSkenirajući tunelski mikroskop
- Englishscanning tunneling microscope
- Češtinařádkovací tunelový mikroskop
- bgСканиращ тунелен микроскоп
- daScanning Tunnel Microscope
- caMicroscopi d'efecte túnel
- DeutschRastertunnelmikroskop
- العربيةمجهر مسح نفقي
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
on a clean (100) surface of gold A scanning tunneling microscope (STM) is a type of scanning probe microscope used for imaging surfaces at the atomic level. Its development in 1981 earned its inventors, Gerd Binnig and Heinrich Rohrer, then at IBM Zürich, the Nobel Prize in Physics in 1986.
STM senses the surface by using an extremely sharp conducting tip that can distinguish features smaller than 0.1 nm with a 0.01 nm (10 pm) depth resolution. This means that individual atoms can routinely be imaged and manipulated.
Most scanning tunneling microscopes are built for use in ultra-high vacuum at temperatures approaching absolute zero, but variants exist for studies in air, water and other environments, and for temperatures over 1000 °C. STM is based on the concept of quantum tunneling. When the tip is brought very near to the surface to be examined, a bias voltage applied between the two allows electrons to tunnel through the vacuum separating them.
The resulting tunneling current is a function of the tip position, applied voltage, and the local density of states (LDOS) of the sample. Information is acquired by monitoring the current as the tip scans across the surface, and is usually displayed in image form.…
on a clean (100) surface of gold A scanning tunneling microscope (STM) is a type of scanning probe microscope used for imaging surfaces at the atomic level. Its development in 1981 earned its inventors, Gerd Binnig and Heinrich Rohrer, then at IBM Zürich, the Nobel Prize in Physics in 1986.
STM senses the surface by using an extremely sharp conducting tip that can distinguish features smaller than 0.1 nm with a 0.01 nm (10 pm) depth resolution. This means that individual atoms can routinely be imaged and manipulated.
Most scanning tunneling microscopes are built for use in ultra-high vacuum at temperatures approaching absolute zero, but variants exist for studies in air, water and other environments, and for temperatures over 1000 °C. STM is based on the concept of quantum tunneling. When the tip is brought very near to the surface to be examined, a bias voltage applied between the two allows electrons to tunnel through the vacuum separating them.
The resulting tunneling current is a function of the tip position, applied voltage, and the local density of states (LDOS) of the sample. Information is acquired by monitoring the current as the tip scans across the surface, and is usually displayed in image form.
A refinement of the technique known as scanning tunneling spectroscopy consists of keeping the tip in a constant position above the surface, varying the bias voltage and recording the resultant change in current. Using this technique, the local density of the electronic states can be reconstructed.
This is sometimes performed in high magnetic fields and in presence of impurities to infer the properties and interactions of electrons in the studied material, for example from quasiparticle interference imaging. Scanning tunneling microscopy can be a challenging technique, as it requires extremely clean and stable surfaces, sharp tips, excellent vibration isolation, and sophisticated electronics.
Nonetheless, many hobbyists build their own microscopes. E = \frac{p^2}{2m_\text{e}} + U(z). The electron will have a defined, non-zero momentum p only in regions where the initial energy E is greater than U(z). In quantum physics, however, the electron can pass through classically forbidden regions.
This is referred to as tunneling. -\frac{\hbar^2}{2m_\text{e}} \frac{\partial^2\psi(z)}{\partial z^2} + U(z)\,\psi(z) = E\,\psi(z), where ħ is the reduced Planck constant, z is the position, and m e is the electron mass. In the zero-potential regions on two sides of the barrier, the wave function takes on the forms \psi_L(z) = e^{ikz} + r\,e^{-ikz} for z \psi_R(z) = t\,e^{ikz} for z > w, where k = \tfrac{1}{\hbar} \sqrt{2m_\text{e}E} .
Inside the barrier, where E \psi_B (z) = \xi e^{-\kappa z} + \zeta e^{\kappa z} for 0 \kappa = \tfrac{1}{\hbar} \sqrt{2m_\text{e}(U - E)} . The coefficients r and t provide measure of how much of the incident electron's wave is reflected or transmitted through the barrier.
Namely, of the whole impinging particle current j_i = \hbar k/m_\text{e} only j_t = |t|^2\, j_i is transmitted, as can be seen from the probability current expression j_t = -i \frac{\hbar}{2m_\text{e}} \left\{\psi_R^* \frac{\partial}{\partial z}\psi_R - \psi_R \frac{\partial}{\partial z}\psi_R^*\right\}, which evaluates to j_t = \tfrac{\hbar k}{m_\text{e}} \vert t \vert^2 . The transmission coefficient is obtained from the continuity condition on the three parts of the wave function and their derivatives at z = 0 and z = w (detailed derivation is in the article Rectangular potential barrier).
This gives |t|^2 = \big[1 + \tfrac{1}{4} \varepsilon^{-1}(1 - \varepsilon)^{-1} \sinh^2\kappa w\big]^{-1}, where \varepsilon = E/U . The expression can be further simplified, as follows: In STM experiments, typical barrier height is of the order of the material's surface work function W, which for most metals has a value between 4 and 6 eV. The work function is the minimum energy needed to bring an electron from an occupied level, the highest of which is the Fermi level (for metals at T = 0 K), to vacuum level.
The electrons can tunnel between two metals only from occupied states on one side into the unoccupied states of the other side of the barrier. Without bias, Fermi energies are flush, and there is no tunneling. Bias shifts electron energies in one of the electrodes higher, and those electrons that have no match at the same energy on the other side will tunnel.
In experiments, bias voltages of a fraction of 1 V are used, so \kappa is of the order of 10 to 12 nm −1 , while w is a few tenths of a nanometre. The barrier is strongly attenuating. The expression for the transmission probability reduces to |t|^2 = 16\,\varepsilon(1 - \varepsilon)\,e^{-2\kappa w}.
The tunneling current from a single level is therefore j_t = \left[\frac{4k\kappa}{k^2 + \kappa^2}\right]^2 \, \frac{\hbar k}{m_\text{e}}\,e^{-2\kappa w}, where both wave vectors depend on the level's energy E, k = \tfrac{1}{\hbar} \sqrt{2m_\text{e}E}, and \kappa = \tfrac{1}{\hbar}\sqrt{2m_\text{e}(U - E)}. Tunneling current is exponentially dependent on the separation of the sample and the tip, typically reducing by an order of magnitude when the separation is increased by 1 Å (0.1 nm).
Because of this, even when tunneling occurs from a non-ideally sharp tip, the dominant contribution to the current is from its most protruding atom or orbital. For small biases and temperatures near absolute zero, the number of electrons in a given volume (the electron concentration) that are available for tunneling is the product of the density of the electronic states ρ(E F ) and the energy interval between the two Fermi levels, eV.
Half of these electrons will be travelling away from the barrier. The other half will represent the electric current impinging on the barrier, which is given by the product of the electron concentration, charge, and velocity v (I i = nev), I_i = \tfrac{1}{2} e^2 v\,\rho(E_\text{F})\,V. The tunneling electric current will be a small fraction of the impinging current.
The proportion is determined by the transmission probability T, so\ I_t = \tfrac{1}{2} e^2v\,\rho(E_\text{F})\,V\,T. In the simplest model of a rectangular potential barrier the transmission probability coefficient T equals |t| 2 . \psi^\text{S}_\mu(t) = \psi^\text{S}_\mu \exp\left(-\frac{i}{\hbar} E^\text{S}_\mu t\right), \psi^\text{T}_\nu(t) = \psi^\text{T}_\nu \exp\left(-\frac{i}{\hbar} E^\text{T}_\nu t\right). If the two systems are put closer together, but are still separated by a thin vacuum region, the potential acting on an electron in the combined system is U T + U S . Here, each of the potentials is spatially limited to its own side of the barrier.
Only because the tail of a wave function of one electrode is in the range of the potential of the other, there is a finite probability for any state to evolve over time into the states of the other electrode. The future of the sample's state μ can be written as a linear combination with time-dependent coefficients of \psi^\text{S}_\mu(t) and all \psi^\text{T}_\nu(t) : \psi(t) = \psi^\text{S}_\mu(t) + \sum_\nu c_\nu(t) \psi^\text{T}_\nu(t) with the initial condition c_\nu(0) = 0 .
When the new wave function is inserted into the Schrödinger equation for the potential U T + U S , the obtained equation is projected onto each separate \psi^\text{T}_\nu (that is, the equation is multiplied by a {\psi^\text{T}_\nu}^* and integrated over the whole volume) to single out the coefficients c_\nu. All \psi^\text{S}_\mu are taken to be nearly orthogonal to all \psi^\text{T}_\nu (their overlap is a small fraction of the total wave functions), and only first-order quantities retained.
Consequently, the time evolution of the coefficients is given by \frac{\mathrm{d}}{\mathrm{d}t} c_\nu(t) = -\frac{i}{\hbar} \int \psi^\text{S}_\mu \,U_\text{T}\, {\psi^\text{T}_\nu}^* \,\mathrm{d}x\,\mathrm{d}y\,\mathrm{d}z\,\exp\left[-\frac{i}{\hbar} (E^\text{S}_\mu - E^\text{T}_\nu) t\right]. Because the potential U T is zero at the distance of a few atomic diameters away from the surface of the electrode, the integration over z can be done from a point z 0 somewhere inside the barrier and into the volume of the tip (z > z 0 ).
If the tunneling matrix element is defined as M_{\mu\nu} = \int_{z > z_0} \psi^\text{S}_\mu \,U_\text{T}\, {\psi^\text{T}_\nu}^* \,\mathrm{d}x\,\mathrm{d}y\,\mathrm{d}z, the probability of the sample's state μ evolving in time t into the state of the tip ν is |c_\nu (t)|^2 = |M_{\mu\nu}|^2 \frac{4 \sin^2\big[\tfrac{1}{2\hbar}(E^\text{S}_\mu - E^\text{T}_\nu )t\big]}{(E^\text{S}_\mu - E^\text{T}_\nu)^2}. In a system with many electrons impinging on the barrier, this probability will give the proportion of those that successfully tunnel.
If at a time t this fraction was |c_\nu (t)|^2, at a later time t + dt the total fraction of |c_\nu(t + \mathrm{d}t)|^2 would have tunneled. The current of tunneling electrons at each instance is therefore proportional to |c_\nu(t + \mathrm{d}t)|^2 - |c_\nu(t)|^2 divided by \mathrm{d}t, which is the time derivative of |c_\nu(t)|^2, \Gamma_{\mu \to \nu}\ \overset{\text{def}}{=}\ \frac{\mathrm{d}}{\mathrm{d}t} |c_\nu(t)|^2 = \frac{2\pi}{\hbar} |M_{\mu\nu}|^2\frac{\sin\big[(E^\text{S}_\mu - E^\text{T}_\nu) \tfrac{t}{\hbar}\big]}{\pi(E^\text{S}_\mu - E^\text{T}_\nu)}.
The time scale of the measurement in STM is many orders of magnitude larger than the typical femtosecond time scale of electron processes in materials, and t/\hbar is large. The fraction part of the formula is a fast-oscillating function of (E^\text{S}_\mu - E^\text{T}_\nu) that rapidly decays away from the central peak, where E^\text{S}_\mu = E^\text{T}_\nu .
In other words, the most probable tunneling process, by far, is the elastic one, in which the electron's energy is conserved. The fraction, as written above, is a representation of the delta function, so \Gamma_{\mu \to \nu} = \frac{2\pi}{\hbar} |M_{\mu\nu}|^2 \delta(E^\text{S}_\mu - E^\text{T}_\nu).
Solid-state systems are commonly described in terms of continuous rather than discrete energy levels. The term \delta(E^\text{S}_\mu - E^\text{T}_\nu) can be thought of as the density of states of the tip at energy E^\text{S}_\mu, giving \Gamma_{\mu \to \nu} = \frac{2\pi}{\hbar} |M_{\mu\nu}|^2 \rho_\text{T}(E^\text{S}_\mu).
The number of energy levels in the sample between the energies \varepsilon and \varepsilon + \mathrm{d}\varepsilon is \rho_\text{S}(\varepsilon)\,\mathrm{d}\varepsilon. When occupied, these levels are spin-degenerate (except in a few special classes of materials) and contain charge 2e \cdot \rho_\text{S}(\varepsilon)\,\mathrm{d}\varepsilon of either spin.
With the sample biased to voltage V, tunneling can occur only between states whose occupancies, given for each electrode by the Fermi–Dirac distribution f , are not the same, that is, when either one or the other is occupied, but not both. That will be for all energies \varepsilon for which f(E_\text{F} - eV + \varepsilon) - f(E_\text{F} + \varepsilon) is not zero.
For example, an electron will tunnel from energy level E_\text{F} - eV in the sample into energy level E_\text{F} in the tip ( \varepsilon = 0 ), an electron at E_\text{F} in the sample will find unoccupied states in the tip at E_\text{F} + eV ( \varepsilon = eV ), and so will be for all energies in between. The tunneling current is therefore the sum of little contributions over all these energies of the product of three factors: 2e \cdot \rho_\text{S}(E_\text{F} - eV + \varepsilon)\,\mathrm{d}\varepsilon representing available electrons, f(E_\text{F} - eV + \varepsilon) - f(E_\text{F} + \varepsilon) for those that are allowed to tunnel, and the probability factor \Gamma for those that will actually tunnel: I_t = \frac{4 \pi e}{\hbar} \int_{-\infty}^{+\infty} [f(E_\text{F} - eV + \varepsilon) - f(E_\text{F} + \varepsilon)] \, \rho_\text{S}(E_\text{F} - eV + \varepsilon) \, \rho_\text{T}(E_\text{F} + \varepsilon) \, |M|^2 \, d \varepsilon.
Typical experiments are run at a liquid-helium temperature (around 4 K), at which the Fermi-level cut-off of the electron population is less than a millielectronvolt wide. The allowed energies are only those between the two step-like Fermi levels, and the integral becomes I_t = \frac{4 \pi e}{\hbar} \int_0^{eV} \rho_\text{S}(E_\text{F} - eV + \varepsilon) \, \rho_\text{T}(E_\text{F} + \varepsilon) \, |M|^2 \, d \varepsilon.
When the bias is small, it is reasonable to assume that the electron wave functions and, consequently, the tunneling matrix element do not change significantly in the narrow range of energies. Then the tunneling current is simply the convolution of the densities of states of the sample surface and the tip: I_t \propto \int_0^{eV} \rho_\text{S}(E_\text{F} - eV + \varepsilon) \, \rho_\text{T}(E_\text{F} + \varepsilon) \, d \varepsilon.
How the tunneling current depends on distance between the two electrodes is contained in the tunneling matrix element M_{\mu\nu} = \int_{z > z_0} \psi^\text{S}_\mu \,U_\text{T}\, {\psi^\text{T}_\nu}^* \,\mathrm{d}x\,\mathrm{d}y\,\mathrm{d}z. This formula can be transformed so that no explicit dependence on the potential remains. First, the U_\text{T}\, {\psi^\text{T}_\nu}^* part is taken out from the Schrödinger equation for the tip, and the elastic tunneling condition is used so that M_{\mu\nu} = \int_{z > z_0} \left({\psi^\text{T}_\nu}^* E_\mu \psi^\text{S}_\mu + \psi^\text{S}_\mu \frac{\hbar^2}{2m} \frac{\partial^2}{\partial z^2}{\psi^\text{T}_\nu}^*\right) \,\mathrm{d}x\,\mathrm{d}y\,\mathrm{d}z. Now E_\mu\, {\psi^\text{S}_\mu} is present in the Schrödinger equation for the sample and equals the kinetic plus the potential operator acting on \psi^\text{S}_\mu.
However, the potential part containing U S is on the tip side of the barrier nearly zero. What remains, M_{\mu\nu} = -\frac{\hbar^2}{2m} \int_{z > z_0} \left({\psi^\text{T}_\nu}^* \frac{\partial^2}{\partial z^2}{\psi^\text{S}_\mu} - {\psi^\text{S}_\mu} \frac{\partial^2}{\partial z^2}{\psi^\text{T}_\nu}^*\right) \,\mathrm{d}x\,\mathrm{d}y\,\mathrm{d}z, can be integrated over z because the integrand in the parentheses equals \partial_z\left({\psi^\text{T}_\nu}^* \, \partial_z \psi^\text{S}_\mu - {\psi^\text{S}_\mu} \, \partial_z {\psi^\text{T}_\nu}^*\right).
Bardeen's tunneling matrix element is an integral of the wave functions and their gradients over a surface separating the two planar electrodes: M_{\mu\nu} = \frac{\hbar^2}{2m} \int_{z = z_0} \left( {\psi^\text{S}_\mu} \frac{\partial}{\partial z}{\psi^\text{T}_\nu}^* - {\psi^\text{T}_\nu}^* \frac{\partial}{\partial z}{\psi^\text{S}_\mu} \right) \,\mathrm{d}x\,\mathrm{d}y. The exponential dependence of the tunneling current on the separation of the electrodes comes from the very wave functions that leak through the potential step at the surface and exhibit exponential decay into the classically forbidden region outside of the material. The tunneling matrix elements show appreciable energy dependence, which is such that tunneling from the upper end of the eV interval is nearly an order of magnitude more likely than tunneling from the states at its bottom.
When the sample is biased positively, its unoccupied levels are probed as if the density of states of the tip is concentrated at its Fermi level. Conversely, when the sample is biased negatively, its occupied electronic states are probed, but the spectrum of the electronic states of the tip dominates.
In this case it is important that the density of states of the tip is as flat as possible. The results identical to Bardeen's can be obtained by considering adiabatic approach of the two electrodes and using the standard time-dependent perturbation theory. This leads to Fermi's golden rule for the transition probability \Gamma_{\mu \to \nu} in the form given above.
Bardeen's model is for tunneling between two planar electrodes and does not explain scanning tunneling microscope's lateral resolution. Tersoff and Hamann used Bardeen's theory and modeled the tip as a structureless geometric point. This helped them disentangle the properties of the tip—which are hard to model—from the properties of the sample surface.
The main result was that the tunneling current is proportional to the local density of states of the sample at the Fermi level taken at the position of the center of curvature of a spherically symmetric tip (s-wave tip model). With such a simplification, their model proved valuable for interpreting images of surface features bigger than a nanometre, even though it predicted atomic-scale corrugations of less than a picometre.
These are well below the microscope's detection limit and below the values actually observed in experiments. In sub-nanometre-resolution experiments, the convolution of the tip and sample surface states will always be important, to the extent of the apparent inversion of the atomic corrugations that may be observed within the same scan.
Such effects can only be explained by modeling of the surface and tip electronic states and the ways the two electrodes interact from first principles.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1367519426 under CC BY-SA 4.0; modifications have been made.