scramjet

Uses your system voice; voice and rate in settings.

Q60591Snapshot

≈ 23 min read

Names in other languages

  • Русскийгиперзвуковой прямоточный воздушно-реактивный двигатель
  • Françaissuperstatoréacteur
  • עבריתמנוע על-מגח סילוני
  • Portuguêsmotor scramjet
  • 中文超音速燃烧冲压发动机
  • Englishscramjet
  • Polskiscramjet
  • 한국어스크램제트

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A scramjet (supersonic combustion ramjet) is a variant of a ramjet airbreathing jet engine in which combustion takes place in supersonic airflow. As in ramjets, a scramjet relies on high vehicle speed to compress the incoming air forcefully before combustion (hence ramjet), but whereas a ramjet decelerates the air to subsonic velocities before combustion using shock cones, a scramjet has no shock cone and slows the airflow using shockwaves produced by its ignition source in place of a shock cone. This allows the scramjet to operate efficiently at extremely high speeds and does not require any moving parts. The operating regime and design of the scramjet results in great practical and technical challenges in their implementation. Because they can only operate in hypersonic airflow (>Mach 5), the aircraft to which they are attached must attain a hypersonic airspeed before the scramjet can be enabled. Any craft moving at such velocities is subject to a great deal of aerodynamic heating, necessitating the use of specialized (and expensive) materials in the construction of the craft, particularly at the nose, leading edges of the wings, air intakes, and within the engine. The engine's fuel has only a few milliseconds of residence time to complete combustion, foregoing the use of complex hydrocarbon fuels (like kerosene) which take a long time to completely burn.…

A scramjet (supersonic combustion ramjet) is a variant of a ramjet airbreathing jet engine in which combustion takes place in supersonic airflow. As in ramjets, a scramjet relies on high vehicle speed to compress the incoming air forcefully before combustion (hence ramjet), but whereas a ramjet decelerates the air to subsonic velocities before combustion using shock cones, a scramjet has no shock cone and slows the airflow using shockwaves produced by its ignition source in place of a shock cone. This allows the scramjet to operate efficiently at extremely high speeds and does not require any moving parts. The operating regime and design of the scramjet results in great practical and technical challenges in their implementation. Because they can only operate in hypersonic airflow (>Mach 5), the aircraft to which they are attached must attain a hypersonic airspeed before the scramjet can be enabled. Any craft moving at such velocities is subject to a great deal of aerodynamic heating, necessitating the use of specialized (and expensive) materials in the construction of the craft, particularly at the nose, leading edges of the wings, air intakes, and within the engine. The engine's fuel has only a few milliseconds of residence time to complete combustion, foregoing the use of complex hydrocarbon fuels (like kerosene) which take a long time to completely burn. Not only must the fuel be chemically simple, it must also have a favorable energy-to-weight ratio, and preferably a high thermal capacity (so it can be used as an airframe coolant prior to combustion). The scramjet's operating environment exceeds the specifications of traditional jet engine control equipment, thus providing an additional design challenge. These challenges have hitherto prevented the widespread use of scramjets; they have so far mostly been demonstrated in research test articles, on experimental vehicles, and a handful of military aircraft. Proposed applications (if technical challenges were resolved) include high-speed intercontinental transport and space launch, to which they would be incredibly well-suited.

History

Before 2000

The Bell X-1 attained supersonic flight in 1947 and, by the early 1960s, rapid progress toward faster aircraft suggested that operational aircraft would be flying at "hypersonic" speeds within a few years. Except for specialised rocket research vehicles like the North American X-15 and other rocket-powered spacecraft, aircraft top speeds have remained level, generally in the range of Mach 1 to Mach 3. During the US aerospaceplane program, between the 1950s and the mid 1960s, Alexander Kartveli and Antonio Ferri were proponents of the scramjet approach. In the 1950s and 1960s a variety of experimental scramjet engines were built and ground tested in the US and the UK. In November 1964 Antonio Ferri successfully demonstrated a scramjet producing a net thrust of 517 pounds-force (2.30 kN), about 80% of his goal. In 1958, an analytical paper discussed the merits and disadvantages of supersonic combustion ramjets. In 1964 Frederick S. Billig and Gordon L. Dugger submitted a patent application for a supersonic combustion ramjet based on Billig's PhD thesis. This patent was issued in 1981 following the removal of an order of secrecy. In 1981 tests were made in Australia under the guidance of Professor Ray Stalker in the T3 ground test facility at ANU. The first successful flight test of a scramjet was performed as a joint effort with NASA over the Soviet Union in 1991. It was an axisymmetric hydrogen-fueled dual-mode scramjet developed by Central Institute of Aviation Motors (CIAM), Moscow, in the late 1970s, but modernized with a FeCrAl alloy on a converted SM-6 missile to achieve initial flight parameters of Mach 6.8, before the scramjet flew at Mach 5.5. The scramjet flight was flown captive-carry atop the SA-5 surface-to-air missile that included an experimental flight support unit known as the "Hypersonic Flying Laboratory" (HFL), "Kholod". Then, from 1992 to 1998, an additional six flight tests of the axisymmetric high-speed scramjet-demonstrator were conducted by CIAM together with France and then with NASA. Maximum flight speed greater than Mach 6.4 was achieved and scramjet operation during 77 seconds was demonstrated. These flight test series also provided insight into autonomous hypersonic flight controls.

2000s

with scramjet attached to the underside|alt=Artist's conception of black, wingless jet with pointed nose profile and two vertical stabilizers traveling high in the atmosphere. In the 2000s significant progress was made in the development of hypersonic technology, particularly in the field of scramjet engines. The HyShot project demonstrated scramjet combustion on 30 July 2002. The scramjet engine worked effectively and demonstrated supersonic combustion in action. However, the engine was not designed to provide thrust to propel a craft. It was designed more or less as a technology demonstrator. A joint British and Australian team from UK defense company Qinetiq and the University of Queensland were the first group to demonstrate a scramjet working in an atmospheric test. Hyper-X claimed the first flight of a thrust-producing scramjet-powered vehicle with full aerodynamic maneuvering surfaces in 2004 with the X-43A. The last of the three X-43A scramjet tests achieved Mach 9.6 for a brief time. On 15 June 2007 the US Defense Advanced Research Project Agency (DARPA), in cooperation with the Australian Defence Science and Technology Organisation (DSTO) , announced a successful scramjet flight at Mach 10 using rocket engines to boost the test vehicle to hypersonic speeds. A series of scramjet ground tests was completed at NASA Langley Arc-Heated Scramjet Test Facility (AHSTF) at simulated Mach 8 flight conditions. These experiments were used to support HIFiRE flight 2. On 22 May 2009 Woomera hosted the first successful test flight of a hypersonic aircraft in HIFiRE (Hypersonic International Flight Research Experimentation). The launch was one of ten planned test flights. The series of flights is part of a joint research program between the Defence Science and Technology Organisation and the US Air Force, designated as the HIFiRE. HIFiRE is investigating hypersonics technology and its application to advanced scramjet-powered space launch vehicles; the objective is to support the new Boeing X-51 scramjet demonstrator while also building a strong base of flight test data for quick-reaction space launch development and hypersonic "quick-strike" weapons.

2010s

On 22 and 23 March 2010 Australian and American defense scientists successfully tested a (HIFiRE) hypersonic rocket. It reached an atmospheric speed of "more than 5,000 kilometres per hour" (Mach 4) after taking off from the Woomera Test Range in outback South Australia. On 27 May 2010 NASA and the United States Air Force successfully flew the X-51A Waverider for approximately 200 seconds at Mach 5, setting a new world record for flight duration at hypersonic airspeed. The Waverider flew autonomously before losing acceleration for an unknown reason and destroying itself as planned. The test was declared a success. The X-51A was carried aboard a B-52, accelerated to Mach 4.5 via a solid rocket booster, and then ignited the Pratt & Whitney Rocketdyne scramjet engine to reach Mach 5 at . However, a second flight on 13 June 2011 was ended prematurely when the engine lit briefly on ethylene but failed to transition to its primary JP-7 fuel, failing to reach full power. On 16 November 2010 Australian scientists from the University of New South Wales at the Australian Defence Force Academy successfully demonstrated that the high-speed flow in a naturally non-burning scramjet engine can be ignited using a pulsed laser source. A further X-51A Waverider test failed on 15 August 2012. The attempt to fly the scramjet for a prolonged period at Mach 6 was cut short when, only 15 seconds into the flight, the X-51A craft lost control and broke apart, falling into the Pacific Ocean north-west of Los Angeles. The cause of the failure was blamed on a faulty control fin. In May 2013 an X-51A Waverider reached 4828 km/h (Mach 5.1) during a six-minute flight under scramjet power. The WaveRider was dropped at from a B-52 bomber, and then accelerated to Mach 4.8 by a solid rocket booster which then separated before the WaveRider's scramjet engine came into effect. On 28 August 2016 the Indian space agency ISRO conducted a successful test of a scramjet engine on a two-stage, solid-fueled rocket. Twin scramjet engines were mounted on the back of the second stage of a two-stage, solid-fueled sounding rocket called Advanced Technology Vehicle (ATV), which is ISRO's advanced sounding rocket. The twin scramjet engines were ignited during the second stage of the rocket when the ATV achieved a speed of 7350 km/h (Mach 6) at an altitude of 20 km. The scramjet engines were fired for a duration of about 5 seconds. On 12 June 2019 India successfully conducted the maiden flight test of its indigenously developed uncrewed scramjet demonstration aircraft for hypersonic speed flight from a base from Abdul Kalam Island in the Bay of Bengal at about 11:25 am. The aircraft is called the Hypersonic Technology Demonstrator Vehicle. The trial was carried out by the Defence Research and Development Organisation. The aircraft forms an important component of the country's programme for development of a hypersonic cruise missile system.

2020s

On 27 September 2021, DARPA announced successful flight of its Hypersonic Air-breathing Weapon Concept scramjet cruise missile. Another successful test was carried out in mid-March 2022 amid the Russian invasion of Ukraine. Details were kept secret to avoid escalating tension with Russia, only to be revealed by an unnamed Pentagon official in early April. On 25 April 2025, DRDO successfully completed over 1,000 seconds of ground testing of a subscale active-cooled scramjet combustor. The DRDO scramjet was again tested for over 12 minutes on 9 January 2026.

Theory

All scramjet engines have an intake which compresses the incoming air, fuel injectors, a combustion chamber, and a divergent thrust nozzle. Sometimes engines also include a region which acts as a flame holder, although the high stagnation temperatures mean that an area of focused waves may be used, rather than a discrete engine part as seen in turbine engines. Other engines use pyrophoric fuel additives, such as silane, to avoid flameout. An isolator between the inlet and combustion chamber is often included to improve the homogeneity of the flow in the combustor and to extend the operating range of the engine. Shockwave imaging by the University of Maryland using Schlieren imaging determined that the fuel mixture controls compression by creating backpressure and shockwaves that slow and compress the air before ignition, much like the shock cone of a Ramjet. The imaging showed that the higher the fuel flow and combustion, the more shockwaves formed ahead of the combustor, which slowed and compressed the air before ignition. (CFD) image of the NASA X-43A with scramjet attached to the underside at Mach 7|alt=Computer-generated image of stress and shock-waves experienced by aerial vehicle travelling at high speed A scramjet is reminiscent of a ramjet. In a typical ramjet, the supersonic inflow of the engine is decelerated at the inlet to subsonic speeds and then reaccelerated through a nozzle to supersonic speeds to produce thrust. This deceleration, which is produced by a normal shock, creates a total pressure loss which limits the upper operating point of a ramjet engine. For a scramjet, the kinetic energy of the freestream air entering the scramjet engine is comparable to the energy released by the reaction of the oxygen content of the air with a fuel (e.g. hydrogen). Thus the heat released from combustion at Mach 2.5 is around 10% of the total enthalpy of the working fluid. Depending on the fuel, the kinetic energy of the air and the potential combustion heat release will be equal at around Mach 8. Thus the design of a scramjet engine is as much about minimizing drag as maximizing thrust. This high speed makes the control of the flow within the combustion chamber more difficult. Since the flow is supersonic, no downstream influence propagates within the freestream of the combustion chamber. Throttling of the entrance to the thrust nozzle is not a usable control technique. In effect, a block of gas entering the combustion chamber must mix with fuel and have sufficient time for initiation and reaction, all the while traveling supersonically through the combustion chamber, before the burned gas is expanded through the thrust nozzle. This places stringent requirements on the pressure and temperature of the flow, and requires that the fuel injection and mixing be extremely efficient. Usable dynamic pressures lie in the range , where q = \frac{1}{2}\rho v^2 where q is the dynamic pressure of the gas ρ (rho) is the density of the gas v is the velocity of the gas To keep the combustion rate of the fuel constant, the pressure and temperature in the engine must also be constant. This is problematic because the airflow control systems that would facilitate this are not physically possible in a scramjet launch vehicle due to the speed and altitude range involved, meaning that it must travel at an altitude specific to its speed. Because air density reduces at higher altitudes, a scramjet must climb at a specific rate as it accelerates to maintain a constant air pressure at the intake. This optimal climb/descent profile is called a "constant dynamic pressure path". It is thought that scramjets might be operable up to an altitude of 75 km. Fuel injection and management is also potentially complex. One possibility would be that the fuel be pressurized to 100 bar by a turbo pump, heated by the fuselage, sent through the turbine and accelerated to higher speeds than the air by a nozzle. The air and fuel stream are crossed in a comb-like structure, which generates a large interface. Turbulence due to the higher speed of the fuel leads to additional mixing. Complex fuels like kerosene need a long engine to complete combustion. The minimum Mach number at which a scramjet can operate is limited by the fact that the compressed flow must be hot enough to burn the fuel, and have pressure high enough that the reaction be finished before the air moves out the back of the engine. Additionally, to be called a scramjet, the compressed flow must still be supersonic after combustion. Here two limits must be observed: First, since when a supersonic flow is compressed it slows down, the level of compression must be low enough (or the initial speed high enough) not to slow the gas below Mach 1. If the gas within a scramjet goes below Mach 1 the engine will "choke", transitioning to subsonic flow in the combustion chamber. This effect is well known amongst experimenters on scramjets since the waves caused by choking are easily observable. Additionally, the sudden increase in pressure and temperature in the engine can lead to an acceleration of the combustion, leading to the combustion chamber exploding. Second, the heating of the gas by combustion causes the speed of sound in the gas to increase (and the Mach number to decrease) even though the gas is still travelling at the same speed. Forcing the speed of air flow in the combustion chamber under Mach 1 in this way is called "thermal choking". It is clear that a pure scramjet can operate at Mach numbers of 6–8, but in the lower limit, it depends on the definition of a scramjet. There are engine designs where a ramjet transforms into a scramjet over the Mach 3–6 range, known as dual-mode scramjets. In this range however, the engine is still receiving significant thrust from subsonic combustion of the ramjet type. The high cost of flight testing and the unavailability of ground facilities have hindered scramjet development. A large amount of the experimental work on scramjets has been undertaken in cryogenic facilities, direct-connect tests, or burners, each of which simulates one aspect of the engine operation. Further, vitiated facilities (with the ability to control air impurities ), storage heated facilities, arc facilities and the various types of shock tunnels each have limitations which have prevented perfect simulation of scramjet operation. The HyShot flight test showed the relevance of the 1:1 simulation of conditions in the T4 and HEG shock tunnels, despite having cold models and a short test time. The NASA-CIAM tests provided similar verification for CIAM's C-16 V/K facility and the Hyper-X project is expected to provide similar verification for the Langley AHSTF, CHSTF, and HTT. Computational fluid dynamics has only recently reached a position to make reasonable computations in solving scramjet operation problems. Boundary layer modeling, turbulent mixing, two-phase flow, flow separation, and real-gas aerothermodynamics continue to be problems on the cutting edge of CFD. Additionally, the modeling of kinetic-limited combustion with very fast-reacting species such as hydrogen makes severe demands on computing resources. Reaction schemes are numerically stiff requiring reduced reaction schemes. Much of scramjet experimentation remains classified. Several groups, including the US Navy with the SCRAM engine between 1968 and 1974, and the Hyper-X program with the X-43A, have claimed successful demonstrations of scramjet technology. Since these results have not been published openly, they remain unverified and a final design method of scramjet engines still does not exist. The final application of a scramjet engine is likely to be in conjunction with engines which can operate outside the scramjet's operating range. Dual-mode scramjets combine subsonic combustion with supersonic combustion for operation at lower speeds, and rocket-based combined cycle (RBCC) engines supplement a traditional rocket's propulsion with a scramjet, allowing for additional oxidizer to be added to the scramjet flow. RBCCs offer a possibility to extend a scramjet's operating range to higher speeds or lower intake dynamic pressures than would otherwise be possible. \Pi_\text{e} + \Pi_\text{f} + \frac{1}{\Gamma} = 1 Where : \Pi_\text{e} = \frac{m_\text{empty}}{m_\text{initial}} is the empty mass fraction, and represents the weight of the superstructure, tankage and engine. \Pi_\text{f} = \frac{m_\text{fuel}}{m_\text{initial}} is the fuel mass fraction, and represents the weight of fuel, oxidiser and any other materials which are consumed during the launch. \Gamma = \frac{m_\text{initial}}{m_\text{payload}} is initial mass ratio, and is the inverse of the payload mass fraction. This represents how much payload the vehicle can deliver to a destination. A scramjet increases the mass of the motor \Pi_\text{e} over a rocket, and decreases the mass of the fuel \Pi_\text{f} . It can be difficult to decide whether this will result in an increased \Gamma (which would be an increased payload delivered to a destination for a constant vehicle takeoff weight). The logic behind efforts driving a scramjet is (for example) that the reduction in fuel decreases the total mass by 30%, while the increased engine weight adds 10% to the vehicle total mass. Unfortunately the uncertainty in the calculation of any mass or efficiency changes in a vehicle is so great that slightly different assumptions for engine efficiency or mass can provide equally good arguments for or against scramjet powered vehicles. Additionally, the drag of the new configuration must be considered. The drag of the total configuration can be considered as the sum of the vehicle drag ( D ) and the engine installation drag ( D_\text{e} ). The installation drag traditionally results from the pylons and the coupled flow due to the engine jet, and is a function of the throttle setting. Thus it is often written as: D_\text{e} = \phi_\text{e} F Where: \phi_\text{e} is the loss coefficient F is the thrust of the engine For an engine strongly integrated into the aerodynamic body, it may be more convenient to think of ( D_\text{e} ) as the difference in drag from a known base configuration. The overall engine efficiency can be represented as a value between 0 and 1 ( \eta_0 ), in terms of the specific impulse of the engine: \eta_0 = \frac{g_0 V_0}{h_\text{PR}} I_\text{sp} = \frac{\mbox{Thrust power}}{\mbox{Chemical energy rate}} Where: g_0 is the acceleration due to gravity at ground level V_0 is the vehicle speed I_\text{sp} is the specific impulse h_\text{PR} is fuel heat of reaction Specific impulse is often used as the unit of efficiency for rockets, since in the case of the rocket, there is a direct relation between specific impulse, specific fuel consumption and exhaust velocity. This direct relation is not generally present for airbreathing engines, and so specific impulse is less used in the literature. Note that for an airbreathing engine, both \eta_0 and I_\text{sp} are a function of velocity. The specific impulse of a rocket engine is independent of velocity, and common values are between 200 and 600 seconds (450 s for the space shuttle main engines). The specific impulse of a scramjet varies with velocity, reducing at higher speeds, starting at about 1200 s, although values in the literature vary. For the simple case of a single stage vehicle, the fuel mass fraction can be expressed as: \Pi_\text{f} = 1 - \exp\left[-\frac{\left(\frac{V_\text{initial}^2}{2} - \frac{V_i^2}{2}\right) + \int{g}\,dr}{\eta_0 h_\text{PR}\left(1 - \frac{D + D_\text{e}}{F}\right)}\right] Where this can be expressed for single stage transfer to orbit as: \Pi_\text{f} = 1 - \exp\left[-\frac{g_0 r_0\left(1 - \frac{1}{2}\frac{r_0}{r}\right)}{\eta_0 h_\text{PR}\left(1 - \frac{D + D_\text{e}}{F}\right)}\right] or for level atmospheric flight from air launch (missile flight): \Pi_\text{f} = 1 - \exp\left[-\frac{g_0 R}{\eta_0 h_\text{PR}\left(1 - \phi_\text{e}\right)\frac{C_\text{L}}{C_\text{D}}}\right] Where R is the range, and the calculation can be expressed in the form of the Breguet range formula: \begin{align} \Pi_\text{f} &= 1 - e^{-BR} \\ B &= \frac{g_0}{\eta_0 h_{PR}\left(1 - \phi_e\right)\frac{C_\text{L}}{C_\text{D}}} \end{align} Where: C_\text{L} is the lift coefficient C_\text{D} is the drag coefficient This extremely simple formulation, used for the purposes of discussion assumes: Single stage vehicle No aerodynamic lift for the transatmospheric lifter However they are true generally for all engines. A scramjet cannot produce efficient thrust unless boosted to high speed, around Mach 5, although depending on the design it could act as a ramjet at low speeds. A horizontal take-off aircraft would need conventional turbofan, turbojet, or rocket engines to take off, sufficiently large to move a heavy craft. Also needed would be fuel for those engines, plus all engine-associated mounting structure and control systems. Turbofan and turbojet engines are heavy and cannot easily exceed about Mach 2–3, so another propulsion method would be needed to reach scramjet operating speed. That could be ramjets or rockets. Those would also need their own separate fuel supply, structure, and systems. A number of proposals instead call for a first stage of droppable solid rocket boosters, which greatly simplifies the design. SJY61 scramjet engine for the Boeing X-51 Unlike jet or rocket propulsion systems facilities which can be tested on the ground, testing scramjet designs uses extremely expensive hypersonic test chambers or expensive launch vehicles, both of which lead to high instrumentation costs. Tests using launched test vehicles very typically end with destruction of the test item and instrumentation.

Proposed applications

An aircraft using this type of jet engine could dramatically reduce the time it takes to travel from one place to another, potentially putting any place on Earth within a 90-minute flight. However, there are questions about whether such a vehicle could carry enough fuel to make useful length trips. In addition, some countries ban or penalize airliners and other civil aircraft that create sonic booms. (For example, in the United States, FAA regulations prohibit supersonic flights over land, by civil aircraft. ) Scramjet vehicle has been proposed for a single stage to tether vehicle, where a Mach 12 spinning orbital tether would pick up a payload from a vehicle at around 100 km and carry it to orbit.

See also

Avangard (hypersonic glide vehicle) Precooled jet engine Ram accelerator Shcramjet SABRE (rocket engine)

Text derived from https://en.wikipedia.org/w/index.php?oldid=1370566201 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.