Screwdriver

Uses your system voice; voice and rate in settings.

Snapshot

≈ 8 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A screwdriver is a tool, manual or powered, used for turning screws.

A screwdriver is a tool, manual or powered, used for turning screws.

Description

A typical simple screwdriver has a handle and a shaft, ending in a tip the user puts into the screw head before turning the handle. This form of the screwdriver has been replaced in many workplaces and homes with a more modern and versatile tool, a power drill, as they are quicker, easier, and can also drill holes. The shaft is usually made of tough steel to resist bending or twisting. The tip may be hardened to resist wear, treated with a dark tip coating for improved visual contrast between tip and screw—or ridged or treated for additional "grip". Handles are typically wood, metal, or plastic and usually hexagonal, square, or oval in cross-section to improve grip and prevent the tool from rolling when set down. Some manual screwdrivers have interchangeable tips that fit into a socket on the end of the shaft and are held in mechanically or magnetically. These often have a hollow handle that contains various types and sizes of tips, and a reversible ratchet action that allows multiple full turns without repositioning the tip or the user's hand. A screwdriver is classified by its tip, which is shaped to fit the driving surfaces (slots, grooves, recesses, etc.) on the corresponding screw head. Proper use requires that the screwdriver's tip engage the head of a screw of the same size and type designation as the screwdriver tip. Screwdriver tips are available in a wide variety of types and sizes (List of screw drives). The two most common are the simple 'blade'-type for slotted screws, and Phillips, generically called "cross-recess", "cross-head", or "cross-point". A wide variety of power screwdrivers ranges from a simple "stick"-type with batteries, a motor, and a tip holder all inline, to powerful "pistol" type VSR (variable-speed reversible) cordless drills that also function as screwdrivers. This is particularly useful as drilling a pilot hole before driving a screw is a common operation. Special combination drill-driver bits and adapters let an operator rapidly alternate between the two. Variations include impact drivers, which provide two types of 'hammering' force for improved performance in certain situations, and "right-angle" drivers for use in tight spaces. Many options and enhancements, such as built-in bubble levels, high/low gear selection, magnetic screw holders, adjustable-torque clutches, keyless chucks, "gyroscopic" control, etc., are available. File:Jeweler's screwdriver.jpg|A jeweler's screwdriver File:Magnetschraubendreher IMGP1940.jpg|Screwdriver with magnetic tip

Slotted

The tool used to drive a slotted screw head is called a standard, common blade, flat-blade, slot-head, straight, flat, flat-tip, or "flat-head" screwdriver. This last usage can be confusing, because the term flat-head also describes a screw with a flat top, designed to install in a countersunk hole. Before the development of the newer bit types, the flat-blade was called the "Common-Blade", because it was the most common one. Depending on the application, the name of this screwdriver may differ. Within the automotive/heavy electric industries, it is known as a "flat head screwdriver"; within the avionics and mining industries, it is known as a "standard screwdriver". Though there are many names; the original device from 1908 was known as a "flat-head screw turner". Among slotted screwdrivers, variations at the blade or bit end involve the profile of the blade as viewed face-on (from the side of the tool). The more common type is sometimes called keystone, where the blade profile is slightly flared before tapering off at the end, which provides extra stiffness to the workface and makes it capable of withstanding more torque by gripping deeper in the screw slot. To maximize access in space-restricted applications, the cabinet variant screwdriver blade sides are straight and parallel, reaching the end of the blade at a right angle. This design is also frequently used in jeweler's screwdrivers. Many textbooks and vocational schools instruct mechanics to grind down the tip of the blade, which, due to the taper, increases its thickness and consequently allows more precise engagement with the slot in the screw. This approach creates a set of graduated slotted screwdrivers that will fit a particular screw for a tighter engagement and reduce screw head deformation. However, many better-quality screwdriver blades are already induction-hardened (surface heat-treated), coated with black-oxide, black-phosphate, or diamond-coated to increase friction between the screwdriver tip and the screw. Thus tip grinding after manufacture will likely compromise their durability so it is best to select the proper tip and avoid weakening the manufacture's treatments.

Phillips

Phillips screwdrivers come in several standard sizes, ranging from tiny "jeweler's" to those used for automobile frame assembly—or #000 to #4 respectively. This size number is usually stamped onto the shank (shaft) or handle for identification. Each bit size fits a range of screw sizes, more or less well. Each Phillips screwdriver size also has a related shank diameter. The driver has a 57° point and tapered, unsharp (rounded) flutes. The #1 and smaller bits come to a blunt point, but the #2 and above have no point, but rather a nearly squared-off tip, making each size incompatible with the other. The design is often criticized for its tendency to cam out at lower torque levels than other "cross head" designs, an effect caused by the tapered profile of the flutes which makes them easier to insert into the screw than other similar styles. There has long been a popular belief that this was actually a deliberate feature of the design. Evidence is lacking for this specific narrative and the feature is not mentioned in the original patents. However, a subsequent refinement to the original design described in US Patent #2,474,994 describes this feature.

Reed and Prince

Reed and Prince, also called Frearson, is another historic cross-head screw configuration. The cross in the screw head is sharper and less rounded than a Phillips, and the bit has 45° flukes and a sharper, pointed end. Also, the Phillips screw slot is not as deep as the Reed and Prince slot. In theory, different size R&P screws fit any R&P bit size.

Pozidriv

Pozidriv and the related Supadriv are widely used in Europe and most of the Far East. While Pozidriv screws have cross heads like Phillips and are sometimes thought effectively the same, the Pozidriv design allows higher torque application than Phillips. It is often claimed that they can apply more torque than any of the other commonly used cross-head screwdriver systems, due to a complex fluting (mating) configuration.

Japanese Industrial Standard (JIS)

Japanese Industrial Standard (JIS) cross-head screwdrivers are still another standard, often inaccurately called Japanese Phillips. Compatible screw heads are usually identifiable by a single depressed dot or an "X" to one side of the cross slot. This is a screw standard throughout the Asia market and Japanese imports. The driver has a 57° point with a flat tip.

Other types

Modern electrical appliances often use screws with heads other than the typical slotted or Phillips styles. Torx is one such pattern that has become widespread. It is a spline tip with a corresponding recess in the screw head. The main cause of this trend is manufacturing efficiency: Torx screwdriver tips do not slip out of the fastener as easily as would a Phillips or slotted driver. Non-typical fasteners are commonplace in consumer devices for their ability to make disassembly more difficult. In microwave ovens, such screws deny casual access to the high-power kilovolt electrical components. Torx and other drivers have become widely available to the consumer due to their increasing use in the industry. Some other styles fit a three-pointed star recess, and a five-lobed spline with rounded edges instead of the square edges of the Torx. This is called a Pentalobe. Specialized patterns of security screws are also used, such as the Line Head (LH) style by OSG System Products, Japan, as used in many Nintendo consoles, though drivers for the more common security heads are, again, readily available. Another type of security head has smooth curved surfaces instead of the slot edges that would permit loosening the screw; it is found in public rest room privacy partitions, and cannot be removed by conventional screwdrivers. File:ElectricScrewdriver.JPG|A rechargeable battery-powered electric screwdriver File:Werkzeugbit extra lang IMGP9240.jpg|Compact electric screwdriver with extended bit File:US Navy 061125-N-6889J-033 Builder 3rd Class Mathew Speece of Naval Mobile Construction Battalion Seven Four (NMCB-74) secures the frame of a wall at Camp Ramadi.jpg|Cordless drill being used to drive screw fastener

Text derived from https://en.wikipedia.org/w/index.php?oldid=1373940398 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

18 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.