Lesson plan
Sel-Sync
Sel-Sync or Selective Synchronous recording is the process of selectively using audio tape record heads as playback heads so that new signals can be recorded on other tracks in perfect sync with the existing tracks. Sel-sync recording dramatically changed the recording process, allowing overdubbing of individual recorded tracks. Sel-sync, along with the multitrack head, was invented by Ross S. Snyder at Ampex in 1955. Three problems had to be solved: mechanical alignment, switching of the record track to playback mode and multitrack erase head. The hard problem was the switching of a track between record and playback mode, as the impedance of record heads is quite different from the impedance of playback heads. Prior to Sel-Sync, record heads were directly wired to the record electronics and playback heads were directly wired to the playback electronics. Also, the designs of the two heads were very different. The problem of switching very low-level and high-impedance circuitry without introducing hum or noise had to be solved. Mort Fujii in the Ampex special projects lab was responsible for the actual design. Ampex did not patent Sel-Sync because Ross Snyder did not think it would be of interest to more than a few musicians and an Ampex lawyer said the idea was obvious, hence unpatentable. Ampex only trademarked the name.…
Article summary
Sel-Sync or Selective Synchronous recording is the process of selectively using audio tape record heads as playback heads so that new signals can be recorded on other tracks in perfect sync with the existing tracks. Sel-sync recording dramatically changed the recording process, allowing overdubbing of individual recorded tracks. Sel-sync, along with the multitrack head, was invented by Ross S. Snyder at Ampex in 1955. Three problems had to be solved: mechanical alignment, switching of the record track to playback mode and multitrack erase head. The hard problem was the switching of a track between record and playback mode, as the impedance of record heads is quite different from the impedance of playback heads. Prior to Sel-Sync, record heads were directly wired to the record electronics and playback heads were directly wired to the playback electronics. Also, the designs of the two heads were very different. The problem of switching very low-level and high-impedance circuitry without introducing hum or noise had to be solved. Mort Fujii in the Ampex special projects lab was responsible for the actual design. Ampex did not patent Sel-Sync because Ross Snyder did not think it would be of interest to more than a few musicians and an Ampex lawyer said the idea was obvious, hence unpatentable. Ampex only trademarked the name.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.