Lesson plan
Send track
Send tracks (sometimes simply called Sends) are the software audio routing equivalent to the aux-sends found on multitrack sound mixing/sequencing consoles. In audio recording, a given song is almost always made up of multiple tracks, with each instrument or sound on its own track (for example, one track could contain the drums, one for the guitar, one for a vocal, etc). Further, each track can be separately adjusted in many ways, such as changing the volume, adding effects, and so on. This can be done with individual hardware components, commonly known as "outside the box," or via software applications known as DAWs (Digital Audio Workstations), commonly known as "inside the box." Send tracks are tracks that aren't (normally) used to record sound on themselves, but to apply those adjustments to multiple, perhaps even all, tracks the same way. For example: if the drums are not on one track, but are instead spread out across multiple tracks (which is common), there is often the desire to treat them all the same in terms of volume, effects, etc. Instead of doing that for each track, you can set up a single send track to apply to all of them.
Article summary
Send tracks (sometimes simply called Sends) are the software audio routing equivalent to the aux-sends found on multitrack sound mixing/sequencing consoles. In audio recording, a given song is almost always made up of multiple tracks, with each instrument or sound on its own track (for example, one track could contain the drums, one for the guitar, one for a vocal, etc). Further, each track can be separately adjusted in many ways, such as changing the volume, adding effects, and so on. This can be done with individual hardware components, commonly known as "outside the box," or via software applications known as DAWs (Digital Audio Workstations), commonly known as "inside the box." Send tracks are tracks that aren't (normally) used to record sound on themselves, but to apply those adjustments to multiple, perhaps even all, tracks the same way. For example: if the drums are not on one track, but are instead spread out across multiple tracks (which is common), there is often the desire to treat them all the same in terms of volume, effects, etc. Instead of doing that for each track, you can set up a single send track to apply to all of them.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.