Lesson plan

Sensitivity (explosives)

In explosives engineering, sensitivity refers to the degree to which an explosive can be initiated by impact, heat, or friction. Current in-use standard methods of mechanical (impact and friction) sensitivity determination differ by the sample preparation (constant mass or volume is usually used; pile or pressed pellet), sample arrangement (confined/unconfined sample etc), instrument type, go/not go criteria, and the statistical analysis of results. Sensitivity, stability and brisance are three of the most significant properties of explosives that affect their use and application. All explosive compounds have a certain amount of energy required to initiate, analogous to the minimum ignition energy of fuel-air mixtures. If an explosive is too sensitive, it may go off accidentally. A safer explosive is less sensitive and will not explode if accidentally dropped or mishandled. However, such explosives are more difficult to initiate intentionally.

Back to article

Article summary

In explosives engineering, sensitivity refers to the degree to which an explosive can be initiated by impact, heat, or friction. Current in-use standard methods of mechanical (impact and friction) sensitivity determination differ by the sample preparation (constant mass or volume is usually used; pile or pressed pellet), sample arrangement (confined/unconfined sample etc), instrument type, go/not go criteria, and the statistical analysis of results. Sensitivity, stability and brisance are three of the most significant properties of explosives that affect their use and application. All explosive compounds have a certain amount of energy required to initiate, analogous to the minimum ignition energy of fuel-air mixtures. If an explosive is too sensitive, it may go off accidentally. A safer explosive is less sensitive and will not explode if accidentally dropped or mishandled. However, such explosives are more difficult to initiate intentionally.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.