Sequential function chart

Article summary

Sequential function chart (SFC) is a visual programming language used for programmable logic controllers (PLCs). It is one of the five languages defined by IEC 61131-3 standard. The SFC standard is defined as Preparation of function charts for control systems, and was based on (itself based on binary Petri nets ). It can be used to program processes that can be split into steps. Main components of SFC are: * Steps with associated actions; * Transitions with associated logic conditions; * Directed links between steps and transitions. Steps in an SFC diagram can be active or inactive. Actions are only executed for active steps. A step can be active for one of two motives: * It is an initial step as specified by the programmer. * It was activated during a scan cycle and not deactivated since. Steps are activated when all steps above it are active and the connecting transition is superable (i.e. its associated condition is true). When a transition is passed, all steps above are deactivated at once and after all steps below are activated at once. Actions associated with steps can be of several types, the most relevant ones being Continuous (N), Set (S), and Reset (R). Apart from the obvious meaning of Set and Reset, an N action ensures that its target variable is set to 1 as long as the step is active.…

Key claims

No claims recorded.

Discussion questions

1. Summarise the article in your own words. Which single claim would you verify first, and why?
2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.