silt
classification of soil or sediment
≈ 7 min read
silt. encyclopegia.org, snapshot silt-031642-6e4c4bdab4b213b2. /a/silt
Names in other languages
- Magyarkőzetliszt
- eosilto
- Portuguêssilte
- Englishsilt
- Españollimo
- isSilt
- Nederlandssilt
- Svenskasilt
- Polskimuł
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Canada|right Silt is granular material of a size between sand and clay and composed mostly of broken grains of quartz. Silt may occur as a soil (often mixed with sand or clay) or as sediment mixed in suspension with water. Silt usually has a floury feel when dry, and lacks plasticity when wet.
Silt can also be felt by the tongue as granular when placed on the front teeth (even when mixed with clay particles). Silt is a common material, making up 45% of average modern mud. It is found in many river deltas and as wind-deposited accumulations, particularly in central Asia, north China, and North America.
It is produced in both very hot climates (through such processes as collisions of quartz grains in dust storms) and very cold climates (through such processes as glacial grinding of quartz grains.) Loess is soil rich in silt, which makes up some of the most fertile agricultural land on Earth.
However, silt is very vulnerable to erosion, and it has poor mechanical properties, making construction on silty soil problematic. The failure of the Teton Dam in 1976 has been attributed to the use of unsuitable loess in the dam core, and liquefication of silty soil is a significant earthquake hazard.
Windblown and waterborne silt are significant forms of environmental pollution, often exacerbated by poor farming practices.
Description
Silt is detritus (fragments of weathered and eroded rock) with properties intermediate between sand and clay. A more precise definition of silt used by geologists is that it is detrital particles with sizes between 1/256 and 1/16 mm (about 4 to 63 microns). This corresponds to particles between 8 and 4 phi units on the Krumbein phi scale.
Other geologists define silt as detrital particles between 2 and 63 microns or 9 to 4 phi units. A third definition is that silt is fine-grained detrital material composed of quartz rather than clay minerals.
Since most clay mineral particles are smaller than 2 microns, while most detrital particles between 2 and 63 microns in size are composed of broken quartz grains, there is good agreement between these definitions in practice. The upper size limit of 1/16 mm or 63 microns corresponds to the smallest particles that can be discerned with the unaided eye.
It also corresponds to a Tanner gap in the distribution of particle sizes in sediments: Particles between 120 and 30 microns in size are scarce in most sediments, suggesting that the distinction between sand and silt has physical significance. As noted above, the lower limit of 2 to 4 microns corresponds to the transition from particles that are predominantly broken quartz grains to particles that are predominantly clay mineral particles.
Assallay and coinvestigators further divide silt into three size ranges: C (2–5 microns), which represents post-glacial clays and desert dust; D1 (20–30 microns) representing "traditional" loess; and D2 (60 microns) representing the very coarse North African loess. Silt can be distinguished from clay in the field by its lack of plasticity or cohesiveness and by its grain size.
Silt grains are large enough to give silt a gritty feel, particularly if a sample is placed between the teeth. Clay-size particles feel smooth between the teeth.
The proportions of coarse and fine silt in a sediment sample are determined more precisely in the laboratory using the pipette method, which is based on settling rate via Stokes' law and gives the particle size distribution accordingly. The mineral composition of silt particles can be determined with a petrographic microscope for grain sizes as low as 10 microns.
Vadose silt is silt-sized calcite crystals found in pore spaces and vugs in limestone. This is emplaced as sediment is carried through the vadose zone to be deposited in pore space.
Occurrence
Silt is a very common material, and it has been estimated that there are a billion trillion trillion (10 33 ) silt grains worldwide. Silt is abundant in eolian and alluvial deposits, including river deltas, such as the Nile and Niger River deltas. Bangladesh is largely underlain by silt deposits of the Ganges delta.
Silt is also abundant in northern China, central Asia, and North America. However, silt is relatively uncommon in the tropical regions of the world. Silt is commonly found in suspension in river water, and it makes up over 0.2% of river sand.
It is abundant in the matrix between the larger sand grains of graywackes. Modern mud has an average silt content of 45%. Silt is often found in mudrock as thin laminae, as clumps, or dispersed throughout the rock.
Laminae suggest deposition in a weak current that winnows the silt of clay, while clumps suggest an origin as fecal pellets. Where silt is dispersed throughout the mudrock, it likely was deposited by rapid processes, such as flocculation. Sedimentary rock composed mainly of silt is known as siltstone.
Silt is common throughout the geologic record, but it seems to be particularly common in Quaternary formations. This may be because deposition of silt is favored by the glaciation and arctic conditions characteristic of the Quaternary. Silt is sometimes known as rock flour or glacier meal, especially when produced by glacial action.
Silt suspended in water draining from glaciers is sometimes known as rock milk or moonmilk.
Human impact
Loess underlies some of the most productive agricultural land worldwide. However, it is very susceptible to erosion. The quartz particles in silt do not themselves provide nutrients, but they promote excellent soil structure, and silt-sized particles of other minerals, present in smaller amounts, provide the necessary nutrients.
Silt, deposited by annual floods along the Nile River, created the rich, fertile soil that sustained the Ancient Egyptian civilization. The closure of the Aswan High Dam has cut off this source of silt, and the fertility of the Nile delta is deteriorating. Loess tends to lose strength when wetted, and this can lead to failure of building foundations.
The silty material has an open structure that collapses when wet. Quick clay (a combination of very fine silt and clay-sized particles from glacial grinding) is a particular challenge for civil engineering. The failure of the Teton Dam has been attributed to the use of loess from the Snake River floodplain in the core of the dam.
Loess lacks the necessary plasticity for use in a dam core, but its properties were poorly understood, even by the U.S. Bureau of Reclamation, with its wealth of experience building earthen dams. Silt is susceptible to liquefaction during strong earthquakes due to its lack of plasticity.
This has raised concerns about the earthquake damage potential in the silty soil of the central United States in the event of a major earthquake in the New Madrid Seismic Zone.
See also
Aleurite Erosion control Nonpoint source pollution Sediment control Silt fence
Text derived from https://en.wikipedia.org/w/index.php?oldid=1375980591 under CC BY-SA 4.0; modifications have been made.