Lesson plan
Simple Loop Prevention Protocol
Simple Loop Prevention Protocol (SLPP) in computer networking is a data link layer protocol developed by Nortel (previously acquired by Avaya, now a part of Extreme Networks) to protect against Layer 2 network loops. SLPP uses a small hello packet to detect network loops. The SLPP protocol checks packets from the originating switch and the peer switch in a SMLT configuration. Sending hello packets on a per VLAN basis allows SLPP to detect VLAN based network loops for un-tagged, as well as tagged IEEE 802.1Q VLAN link configurations. If a loop is detected, the associated port is shut down.
Article summary
Simple Loop Prevention Protocol (SLPP) in computer networking is a data link layer protocol developed by Nortel (previously acquired by Avaya, now a part of Extreme Networks) to protect against Layer 2 network loops. SLPP uses a small hello packet to detect network loops. The SLPP protocol checks packets from the originating switch and the peer switch in a SMLT configuration. Sending hello packets on a per VLAN basis allows SLPP to detect VLAN based network loops for un-tagged, as well as tagged IEEE 802.1Q VLAN link configurations. If a loop is detected, the associated port is shut down.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.