Ski wax

Ski wax is a material applied to the bottom of snow runners, including skis, snowboards, and toboggans, to improve their coefficient of friction performance under varying snow conditions.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 10 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Ski wax is a material applied to the bottom of snow runners, including skis, snowboards, and toboggans, to improve their coefficient of friction performance under varying snow conditions. The two main types of wax used on skis are glide waxes and grip waxes. They address kinetic friction—to be minimized with a glide wax—and static friction—to be achieved with a grip wax.

Both types of wax are designed to be matched with the varying properties of snow, including crystal type and size, and moisture content of the snow surface, which vary with temperature and the temperature history of the snow. Glide wax is selected to minimize sliding friction for both alpine and cross-country skiing.

Grip wax (also called "kick wax") provides on-snow traction for cross-country skiers, as they stride forward using classic technique. Modern plastic materials (e.g. high-modulus polyethylene and Teflon), used on ski bases, have excellent gliding properties on snow, which in many circumstances diminish the added value of a glide wax.

Likewise, unidirectional textures (e.g. fish scale or micro-scale hairs) underfoot on cross-country skis can offer a practical substitute for grip wax, particularly in wet or icy snow conditions.

Science of sliding on snow

The ability of a ski or other runner to slide over snow depends on both the properties of the snow and the ski to result in an optimum amount of lubrication from melting the snow by friction with the ski—too little and the ski interacts with solid snow crystals, too much and capillary attraction of meltwater retards the ski.

Friction

Before a ski can slide, it must overcome the maximum value static friction, F_{max} = \mu_\mathrm{s} F_{n}\, , for the ski/snow contact, where \mu_\mathrm{s} is the coefficient of static friction and F_{n}\, is the normal force of the ski on snow. Kinetic (or dynamic) friction occurs when the ski is moving over the snow.

The coefficient of kinetic friction, \mu_\mathrm{k} , is less than the coefficient of static friction for both ice and snow. The force required for sliding on snow is the product of the coefficient of kinetic friction and the normal force: F_{k} = \mu_\mathrm{k} F_{n}\, . Both the static and kinetic coefficients of friction increase with colder snow temperatures (also true for ice).

Snow properties

Snowflakes have a wide range of shapes, even as they fall; among these are: six-sided star-like dendrites, hexagonal needles, platelets and icy pellets. Once snow accumulates on the ground, the flakes immediately begin to undergo transformation (called metamorphism), owing to temperature changes, sublimation, and mechanical action.

Temperature changes may be from the ambient temperature, solar radiation, rainwater, wind, or the temperature of the material beneath the snow layer. Mechanical action includes wind and compaction.

Over time, bulk snow tends to consolidate —its crystals become truncated from breaking apart or losing mass with sublimation directly from solid to gas and with freeze-thaw, causing them to combine as coarse and granular ice crystals. Colbeck reports that fresh, cold, and man-made snow all interact more directly with the base of a ski and increase friction, indicating the use of harder waxes.

Conversely, older, warmer, and denser snows present lower friction, in part due to increased grain size, which better promotes a water film and a smoother surface of the snow crystals for which softer waxes are indicated. File:Wilson A. Bentley snowflake, 1890.jpg|Dendritic snowflake—micrograph by Wilson Bentley File:Bentley snowflake micrograph no. 777.jpg|Platelets and needles, two alternate forms of snowflakes File:Fresh dry snow forming bonds.png|Fresh, dry snow with newly formed bonds, showing a grain boundary (top center) File:Clustered ice grains in wet snow.png|Cluster of ice grains in wet snow at a low liquid content—grain crystals range 0.5 to 1.0 mm.

Ski friction properties

Colbeck offers an overview of the five friction processes of skis on snow. They are the: 1) resistance due to plowing of snow out of the way, 2) deformation of the snow over which the ski is traveling, 3) lubrication of the ski with a thin layer of melt water, 4) capillary attraction of water in the snow to the ski bottom, and 5) contamination of the snow with dust and other non-slippery elements.

Plowing and deformation pertain to the interaction of the ski, as a whole, with the snow and are negligible on a firm surface. Lubrication, capillary attraction and contamination are issues for the ski bottom and the wax that is applied to reduce sliding friction or achieve adequate grip.

Typically, a sliding ski melts a thin and transitory film of lubricating layer of water, caused by the heat of friction between the ski and the snow in its passing. Colbeck suggests that the optimum water film thickness is in the range between 4 and 12 μm. However, the heat generated by friction can be lost by conduction to a cold ski, thereby diminishing the production of the melt layer.

At the other extreme, when the snow is wet and warm, heat generation creates a thicker film that can create increased capillary drag on the ski bottom. Kuzmin and Fuss suggest that the most favorable combination of ski base material properties to minimize ski sliding friction on snow include: increased hardness and lowered thermal conductivity of the base material to promote meltwater generation for lubrication, wear resistance in cold snow, and hydrophobicity to minimize capillary suction.

These attributes are readily achievable with a PTFE base, which diminishes the value added by glide waxes. Lintzén reports that factors other than wax are much more important in reducing friction on cross-country skate skis—the curvature of the ski and snow conditions.

Properties

A variety of glide waxes are tailored for specific temperature ranges and other snow properties with varying wax hardness and other properties that address repellence of moisture and dirt. The hardness of the glide wax affects the melting of the snow to lubricate its passage over the surface and its ability to avoid suction from meltwater in the snow.

Too little melting and sharp edges of snow crystals or too much suction impede the passage of the ski. A tipping point between where crystal type dominates sliding friction and moisture content dominates occurs around . Harder waxes address colder, drier or more abrasive snow conditions, whereas softer waxes have a lower coefficient of friction, but abrade more readily.

Wax formulations combine three types of wax to adjust coefficient of friction and durability. From hard to soft, they include synthetic waxes with 50 or more carbon atoms, microcrystalline waxes with 25 to 50 carbon atoms and paraffin waxes with 20 to 35 carbon atoms.

Additives to such waxes include graphite, teflon, silicon, fluorocarbons, and molybdenum to improve glide and/or reduce dirt accumulation.

Application

Glide wax can be applied cold or hot. Liquid or spray waxes are most often used for cold applications. Some hard waxes and wax pastes can also be applied cold, though these typically require the heat generated by the friction of a waxing cork to properly adhere. Hot applications of wax include the use of heat from an iron, infrared lamp, a "hot box" oven, or a waxing machine.

Base material

The role of glide wax is to adapt and improve the friction properties of a ski base to the expected snow properties to be encountered on a spectrum from cold crystalline snow to saturated granular snow. Modern ski bases often are made from ultra-high-molecular-weight polyethylene (UHMWPE).

Kuzmin asserts that UHMWPE is non-porous and can hold neither wax nor water, so there is no possibility for filling pores; furthermore, he asserts that UHMWPE is very hydrophobic, which means that wet snow does not appreciably retard the ski and that glide wax offers little additional ability to repel water. He notes that clear bases are more durable and hydrophobic than those with carbon content.

The same author asserts that texture is more important than surface chemistry for creating the optimum balance between a running surface that's too dry (not slippery enough) and too wet (ski subject to suction forces). In warm, moist snow, texture can help break the retarding capillary attraction between the ski base and the snow.

Giesbrecht agrees that low wetting angle of the ski base is key and also emphasizes the importance of the degree of surface roughness at the micrometre scale as a function of snow temperature—cold snow favoring a smoother surface and wetter, warmer snow favoring a textured surface. Some authors question the necessity to use any glide waxes on modern ski bases.

File:Melting ski wax.jpg|Melting glide wax onto a skate ski to be ironed in and scraped smooth File:Application of grip wax to a classic cross-country ski.jpg|Application of grip wax to a classic cross-country ski, using a canister of wax, like those shown in the left foreground File:Smoothing of grip wax on a classic cross-country ski.jpg|Smoothing of grip wax on a classic cross-country ski, using a hand-held "cork", like the item marked "Swix" in the right foreground

Fluorinated waxes

Fluorinated waxes are a mixture of simple waxes and fluorinated waxes available in varying proportions. They glide slightly better and repel dirt slightly better than conventional waxes (also known as hydrocarbon waxes) because they are slightly more hydrophobic due to the fluorination.

Fluorinated glide waxes are divided into different product categories: Products with a low fluorine content of 0.5–1.5% (low-fluoro ski wax, LF) Products with a high fluorine content of 4–12% (high-fluoro ski wax, HF) Products that only contain fluorine compounds (pure fluorocarbon, FC or Cera) Semifluorinated alkanes are used in the first two categories, while perfluoroalkanes are used in the third. F6H16.svg|Structural formula of F 6 H 16 , an example of semifluorinated n-alkanes Perfluorododecane.svg|Structural formula perfluorododecane, used in FC waxes Around 20 tonnes of fluorinated waxes have been produced annually in the European Economic Area.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1367749019 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

34 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.