Skin effect
, current density decreases exponentially from the surface towards the inside.
≈ 12 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
, current density decreases exponentially from the surface towards the inside. Skin depth, δ, is defined as the depth where the current density is just 1/e (about 37%) of the value at the surface; it depends on the frequency of the current and the electrical and magnetic properties of the conductor. s use stranded coils (Litz wire) to reduce heating of the coil itself due to skin effect.
The AC frequencies used in induction cookers are much higher than standard mains frequency ‒ typically around 25–50 kHz. In electromagnetism, skin effect is the tendency of an alternating electric current (AC) to become distributed within a conductor such that the current density is largest near the surface of the conductor and decreases exponentially with greater depths in the conductor.
It is caused by opposing eddy currents induced by the changing magnetic field resulting from the alternating current. The electric current flows mainly at the skin of the conductor, between the outer surface and a level called the skin depth.
Skin depth depends on the frequency of the alternating current; as frequency increases, current flow becomes more concentrated near the surface, resulting in less skin depth. Skin effect reduces the effective cross-section of the conductor and thus increases its effective resistance. At 60 Hz in copper, skin depth is about 8.5 mm.…
, current density decreases exponentially from the surface towards the inside. Skin depth, δ, is defined as the depth where the current density is just 1/e (about 37%) of the value at the surface; it depends on the frequency of the current and the electrical and magnetic properties of the conductor. s use stranded coils (Litz wire) to reduce heating of the coil itself due to skin effect.
The AC frequencies used in induction cookers are much higher than standard mains frequency ‒ typically around 25–50 kHz. In electromagnetism, skin effect is the tendency of an alternating electric current (AC) to become distributed within a conductor such that the current density is largest near the surface of the conductor and decreases exponentially with greater depths in the conductor.
It is caused by opposing eddy currents induced by the changing magnetic field resulting from the alternating current. The electric current flows mainly at the skin of the conductor, between the outer surface and a level called the skin depth.
Skin depth depends on the frequency of the alternating current; as frequency increases, current flow becomes more concentrated near the surface, resulting in less skin depth. Skin effect reduces the effective cross-section of the conductor and thus increases its effective resistance. At 60 Hz in copper, skin depth is about 8.5 mm.
At high frequencies, skin depth becomes much smaller. Increased AC resistance caused by skin effect can be mitigated by using a specialized multistrand wire called litz wire. Because the interior of a large conductor carries little of the current, tubular conductors can be used to save weight and cost.
Skin effect has practical consequences in the analysis and design of radio-frequency and microwave circuits, transmission lines (or waveguides), and antennas. It is also important at mains frequencies (50–60 Hz) in AC electric power transmission and distribution systems. It is one of the reasons for preferring high-voltage direct current for long-distance power transmission.
The effect was first described in a paper by Horace Lamb in 1883 for the case of spherical conductors, and was generalized to conductors of any shape by Oliver Heaviside in 1885. J = J_\mathrm{S} \,e^{-{(1+j)d/\delta }} where \delta is called the skin depth which is defined as the depth below the surface of the conductor at which the current density has fallen to 1/e (about 0.37) of S . The imaginary part of the exponent indicates that the phase of the current density is delayed 1 radian for each skin depth of penetration.
One full wavelength in the conductor requires 2 skin depths, at which point the current density is attenuated to e −2 (1.87× , or −54.6 dB) of its surface value. The wavelength in the conductor is much shorter than the wavelength in vacuum, or equivalently, the phase velocity in a conductor is very much slower than the speed of light in vacuum.
For example, a 1 MHz radio wave has a wavelength in vacuum of about 300 m, whereas in copper, the wavelength is reduced to only about 0.5 mm with a phase velocity of only about 500 m/s. As a consequence of Snell's law and this very tiny phase velocity in a conductor, any wave entering a conductor, even at grazing incidence, refracts essentially in the direction perpendicular to the conductor's surface. The general formula for skin depth when there is no dielectric or magnetic loss is: \delta= \sqrt{ \frac{\, 2\rho \,}{\omega\mu } \left (\sqrt{1 + \left({\rho\omega\varepsilon}\right)^2 \,} + \rho\omega\varepsilon \right) \,} where At frequencies much below 1/(\rho \varepsilon) the quantity inside the large parentheses is close to unity and the formula is more usually given as: \delta=\sqrt{\frac{\, 2\rho \,}{\omega\mu} \,} ~.
This formula is valid at frequencies away from strong atomic or molecular resonances (where \varepsilon would have a large imaginary part) and at frequencies that are much below both the material's plasma frequency (dependent on the density of free electrons in the material) and the reciprocal of the mean time between collisions involving the conduction electrons. In good conductors such as metals all of those conditions are ensured at least up to microwave frequencies, justifying this formula's validity.
For example, in the case of copper, this would be true for frequencies much below . However, in very poor conductors, at sufficiently high frequencies, the quantity inside the large parentheses increases. At frequencies much higher than 1/(\rho \varepsilon) , skin depth approaches the asymptotic value: \delta \approx {2 \rho} \sqrt{\frac{\, \varepsilon \,}{ \mu }\,} ~.
This departure from the usual formula only applies for materials of rather low conductivity and at frequencies where the vacuum wavelength is not much larger than the skin depth itself. For instance, bulk silicon (undoped) is a poor conductor and has a skin depth of about 40 meters at 100 kHz ( = 3 km).
However, as the frequency is increased well into the megahertz range, its skin depth never falls below the asymptotic value of 11 meters. The conclusion is that in poor solid conductors, such as undoped silicon, skin effect does not need to be taken into account in most practical situations.
Round wire
When skin depth is not small with respect to the radius of the wire, current density may be described in terms of Bessel functions. The current density inside round wire away from the influences of other fields, as function of distance from the axis is given by: \mathbf{J}(r) = \frac{ k \mathbf{I} }{ 2 \pi R } \frac{ J_0(k r) }{ J_1(k R) } = \mathbf{J}(R) \frac{ J_0(k r) }{ J_0(k R) } where {{unbulleted list | style = padding-left: 1.5em | \omega ={} angular frequency of current = 2 × frequency | r = {} distance from the axis of the wire | R = {} radius of the wire | \mathbf{J}(r) = {} current density phasor at distance, r, from the axis of the wire | \mathbf{J}(R) = {} current density phasor at the surface of the wire | \mathbf{I} = total current phasor | J_0 = {} Bessel function of the first kind, order 0 | J_1 = {} Bessel function of the first kind, order 1 | k = \sqrt{ \frac { -j \omega \mu } { \rho } } = \frac { 1-j } { \delta } the wave number in the conductor | \delta = \sqrt{ \frac { 2 \rho } { \omega \mu } } also called skin depth. | \rho = {} resistivity of the conductor | \mu_r = {} relative magnetic permeability of the conductor | \mu_0 = {} the permeability of free space = 4 × 10 −7 H/m | \mu = \mu_r \mu_0 }} Since k is complex, the Bessel functions are also complex.
The amplitude and phase of the current density varies with depth.
Derivation
Combining the electromagnetic wave equation and Ohm's law produces \nabla^2\mathbf{J}(r) + k^2\mathbf{J}(r) = \frac{\partial^2}{\partial r^2}\mathbf{J}(r) + \frac{1}{r}\frac{\partial}{\partial r}\mathbf{J}(r) + k^2\mathbf{J}(r) = 0. The solution to this equation is, for finite current in the center of the conductor, \mathbf{J}(r) = \mathbf{C}J_0(kr), where J_0 is a Bessel function of the first kind of order 0 and \mathbf{C} is a constant phasor.
To satisfy the boundary condition for the current density at the surface of the conductor, \mathbf{J}(R), \mathbf{C} must be \frac{\mathbf{J}(R)}{J_0(kR)}. Thus, \mathbf{J}(r) = \mathbf{J}(R)\frac{J_0(kr)}{J_0(kR)} .
Impedance
R\approx {{\ell \rho} \over {\pi (D-\delta) \delta}} \approx {{\ell \rho} \over {\pi D \delta}} The final approximation above assumes D \gg \delta . A convenient formula (attributed to F.E. Terman) for the diameter of a wire of circular cross-section whose resistance will increase by 10% at frequency is: D_\mathrm{W} = {\frac{200~\mathrm{mm}}{\sqrt{f/\mathrm{Hz}}}} This formula for the increase in AC resistance is accurate only for an isolated wire.
For nearby wires, e.g. in a cable or a coil, the AC resistance is also affected by proximity effect, which can cause an additional increase in the AC resistance. The internal impedance per unit length of a segment of round wire is given by: \mathbf{Z}_\text{int} = \frac { k \rho } { 2 \pi R } \frac { J_0(k R) } { J_1(k R) }.
This impedance is a complex quantity corresponding to a resistance (real) in series with the reactance (imaginary) due to the wire's internal self-inductance, per unit length. L_\text{total} = L_\text{cen} + L_\text{shd} + L_\text{ext}\, L_\text{ext} \, is not changed by the skin effect and is given by the frequently cited formula for inductance L per length D of a coaxial cable: L/D = \frac{\mu_0}{2 \pi} \ln \left( \frac {b}{a} \right) \, At low frequencies, all three inductances are fully present so that L_\text{DC} = L_\text{cen} + L_\text{shd} + L_\text{ext}\, .
At high frequencies, only the dielectric region has magnetic flux, so that L_\infty = L_\text{ext}\, . Most discussions of coaxial transmission lines assume they will be used for radio frequencies, so equations are supplied corresponding only to the latter case.
As skin effect increases, the currents are concentrated near the outside the inner conductor (r = a) and the inside of the shield (r = b). Since there is essentially no current deeper in the inner conductor, there is no magnetic field beneath the surface of the inner conductor. Since the current in the inner conductor is balanced by the opposite current flowing on the inside of the outer conductor, there is no remaining magnetic field in the outer conductor itself where b . Only L_\text{ext} contributes to the electrical inductance at these higher frequencies.
Although the geometry is different, a twisted pair used in telephone lines is similarly affected: at higher frequencies, the inductance decreases by more than 20% as can be seen in the following table. L(f) = \frac {\ell_0 + \ell_\infty \left(\frac{f}{f_m}\right)^b }{1 + \left(\frac{f}{f_m}\right)^b} \, \begin{align} \delta &= \frac{1}{\alpha} = \sqrt{{2\rho }\over{(2 \pi f) (\mu_0 \mu_r)}} \\ &= \frac{1}{\sqrt{\pi f \mu \sigma}} \approx 503\,\sqrt{\frac{\rho}{\mu_r f}} \approx 503\,\frac{1}{\sqrt{\mu_r f \sigma}}, \end{align} where Gold is a good conductor with a resistivity of and is essentially nonmagnetic: \mu_r = 1, so its skin depth at a frequency of 50 Hz is given by \delta = 503 \,\sqrt{\frac{2.44 \cdot 10^{-8}}{1 \cdot 50}}= 11.1\,\mathrm{mm} Lead, in contrast, is a relatively poor conductor (among metals) with a resistivity of , about 9 times that of gold.
Its skin depth at 50 Hz is likewise found to be about 33 mm, or \sqrt{9} = 3 times that of gold. Highly magnetic materials have a reduced skin depth owing to their large permeability \mu_r as was pointed out above for the case of iron, despite its poorer conductivity.
A practical consequence is seen by users of induction cookers, where some types of stainless steel cookware are unusable because they are not ferromagnetic. At very high frequencies skin depth for good conductors becomes tiny.
For instance, skin depths of some common metals at a frequency of 10 GHz (microwave region) are less than a micrometer: Thus at microwave frequencies, most of the current flows in an extremely thin region near the surface. Ohmic losses of waveguides at microwave frequencies are therefore only dependent on the surface coating of the material.
A layer of silver 3 μm thick evaporated on a piece of glass is thus an excellent conductor at such frequencies. In copper, skin depth can be seen to fall according to the square root of frequency: In Engineering Electromagnetics, Hayt points out that in a power station a busbar for alternating current at 60 Hz with a radius larger than one-third of an inch (8 mm) is a waste of copper, and in practice bus bars for heavy AC current are rarely more than half an inch (12 mm) thick except for mechanical reasons.
References
Nahin, Paul J. Oliver Heaviside: Sage in Solitude. New York: IEEE Press, 1988. .
Text derived from https://en.wikipedia.org/w/index.php?oldid=1305941429 under CC BY-SA 4.0; modifications have been made.