Lesson plan
Sleep mode
standardized in IEEE 1621 Sleep mode (or suspend to RAM or stand by) is a low-power mode for electronic devices such as computers, televisions, and remote controlled devices. Sleep modes save significantly on electrical consumption compared to leaving a device fully on and, upon resuming to a working state, allow the user to avoid having to reissue instructions or wait for a machine to boot. Many devices signify this power mode with a pulsed or red-colored LED power light.
Article summary
standardized in IEEE 1621 Sleep mode (or suspend to RAM or stand by) is a low-power mode for electronic devices such as computers, televisions, and remote controlled devices. Sleep modes save significantly on electrical consumption compared to leaving a device fully on and, upon resuming to a working state, allow the user to avoid having to reissue instructions or wait for a machine to boot. Many devices signify this power mode with a pulsed or red-colored LED power light.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.