Lesson plan
Slic3r
Slic3r is free software 3D slicing engine for 3D printers. It generates G-code from 3D CAD files (STL or OBJ). Once finished, an appropriate G-code file for the production of the 3D modeled part, or object is sent to the 3D printer for the manufacturing of a physical object. As of 2013, about half of the 3D printers tested by Make Magazine supported Slic3r. Prusa Research maintains an advanced fork called PrusaSlicer. SuperSlicer is a further fork of PrusaSlicer.
Article summary
Slic3r is free software 3D slicing engine for 3D printers. It generates G-code from 3D CAD files (STL or OBJ). Once finished, an appropriate G-code file for the production of the 3D modeled part, or object is sent to the 3D printer for the manufacturing of a physical object. As of 2013, about half of the 3D printers tested by Make Magazine supported Slic3r. Prusa Research maintains an advanced fork called PrusaSlicer. SuperSlicer is a further fork of PrusaSlicer.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.