Slice knot

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

, showing minima, saddles and a maximum, and as an illustration a movie for the Kinoshita–Terasaka knot A slice knot is a mathematical knot in 3-dimensional space that bounds an embedded disk in 4-dimensional space.

, showing minima, saddles and a maximum, and as an illustration a movie for the Kinoshita–Terasaka knot]] A slice knot is a mathematical knot in 3-dimensional space that bounds an embedded disk in 4-dimensional space. A knot K \subset S^3 is said to be a topologically slice knot or a smoothly slice knot, if it is the boundary of an embedded disk in the 4-ball B^4 , which is locally flat or smooth, respectively. Here we use S^3 = \partial B^4 : the 3-sphere S^3 = \{\mathbf{x} \in \mathbb{R}^4 : |\mathbf{x}| = 1\} is the boundary of the four-dimensional ball B^4 = \{\mathbf{x} \in \mathbb{R}^4 : |\mathbf{x}| \leq 1 \}. Every smoothly slice knot is topologically slice because a smoothly embedded disk is locally flat. Usually, smoothly slice knots are also just called slice. Both types of slice knots are important in 3- and 4-dimensional topology. Smoothly slice knots are often illustrated using knots diagrams of ribbon knots and it is an open question whether there are any smoothly slice knots which are not ribbon knots (′Slice-ribbon conjecture′). The Alexander polynomial of a slice knot can be written as \Delta(t)=f(t)f(t^{-1}) with a Laurent polynomial f with integer coefficients (Fox-Milnor condition). It follows that the knot's determinant ( =\Delta(-1) ) is a square number. The signature is an invariant of concordance classes and the signature of slice knots is zero. Furthermore, the signature map is a homomorphism from concordance group to the integers: The signature of the sum of two concordance classes is the sum of the two signatures. It follows that the concordance group contains elements of infinite order: The signature of a trefoil knot is ±2 and the signature of the concordance class of the connected sum of n trefoils is \pm 2n and therefore not 0. The concordance group also contains elements of order 2: The figure-eight knot 4_1 is amphicheiral and invertible, and therefore we have 4_1 = -4_1 . In the concordance group we find 4_1 \sharp 4_1 = 4_1 \sharp -4_1 = 0 . Since the determinant of the figure-eight knot is 5, which is not a square number, this knot is not slice and it follows that its order in the concordance group is 2. Of course, knots with a finite order in the concordance group always have signature 0. For both variants of the concordance group it is unknown whether elements of finite order > 2 exist. On the other hand, invariants with different properties for the two concordance variants exist: Knots with trivial Alexander polynomial ( \Delta(t)=1 ) are always topologically slice, but not necessarily smoothly slice (the Conway knot is an example for that). Rasmussen's s-invariant vanishes for smoothly slice, but in general not for topologically slice knots. As an alternative to the above definition of concordance using slice knots there is also a second equivalent definition. Two oriented knots K_1 and K_2 are concordant if they are the boundary of a (locally flat or smooth) cylinder C = S^1 \times [0,1] (in the 4-dimensional space S^3 \times [0,1] ). The orientations of the two knots have to be consistent to the cylinder's orientation, which is illustrated in the third figure. The boundary of S^3 \times [0,1] are two S^3 with different orientations and therefore two mirrored trefoils are shown as boundary of the cylinder. Connecting the two knots by cutting out a strip from the cylinder yields a disk, showing that for all knots the connected sum K \sharp -K is slice. In both definitions a knot is slice if and only if it is concordant to the trivial knot. This can be illustrated also with the first figure at the top of this article: If a small disk at the local minimum on the bottom left is cut out then the boundary of the surface at this place is a trivial knot and the surface is a cylinder. At the other end of the cylinder we have a slice knot. If the disk (or cylinder) is smoothly embedded it can be slightly deformed to a so-called Morse position. This is useful because the critical points with respect to the radial function r carry geometrical meaning. At saddle points, trivial components are added or destroyed (band moves, also called fusion and fission). For slice knots any number of these band moves are possible, whereas for ribbon knots only fusions may occur and fissions are not allowed. In the illustration on the right the geometrical description of the concordance is rotated by 90° and the parameter r is renamed to t. This name fits well to a time interpretation of a surface ′movie′.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1354671296 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001354671296 · captured 1779035257.0 · version history

Cite this page as: encyclopegia.org, “Slice knot”, snapshot enwiki-001354671296. https://encyclopegia.org/a/slice-knot

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.