Slickenside

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In geology, a slickenside is a smoothly polished surface caused by frictional movement between rocks along a fault. This surface is typically striated with linear features, called slickenlines, in the direction of movement.

In geology, a slickenside is a smoothly polished surface caused by frictional movement between rocks along a fault. This surface is typically striated with linear features, called slickenlines, in the direction of movement.

Asperity plowing

An asperity on a fault surface is a bump or point with higher relief than the area around it. The asperity, when pressed into the opposing rock surface and then moved, digs into the opposing rock, forming troughs, grooves, and scratches. Asperity plowing is thus a result of permanent deformation in the brittle regime at a small scale.

Debris streaking

When an asperity plows into the opposing rock, it wears itself and the opposing rock down and produces fine debris. This debris, or wear product, accumulates both in front of and behind the asperity in a long, elongated shape. If the asperity is relatively hard, the debris will accumulate in front of the asperity. If the asperity is relatively soft, the debris will trail behind. This debris hardens over time and is preserved as a form of slickenline.

Erosional sheltering

Some rocks may contain particles that are harder than the rest of the rock. When these rocks are worn, the harder particles will resist wear more than the softer rock, the rock on the lee side of the hard particle will be protected from wear. This creates a tail that starts abruptly as a crag where the hard particle was located and is elongated parallel to the direction of movement down-slip from the particle.

Fibre growth

The fault plane may be coated by mineral fibres that grew during the fault movement, known as slickenfibres. Due to irregularities in the fault plane, exposed slickenfibres typically have a stepped appearance that can be used to determine the sense of movement across the fault. Slickenfibres are secondary minerals that make up the slickensides rather than the rock itself. Slickenfibres form in areas where the rock slowly creep past one another rather than sliding suddenly as a result of an earthquake. Unlike slickenlines, which give two possibilities for slip direction, slickenfibres preserve the true slip direction. File:FaultLineScarp.JPG|An exposed reverse fault plane with large slickenlines. Gobi, Mongolia. File:PySlick.JPG|Dextral slickenside of pyrite File:Slickensides.JPG|Slickensides developed on the surface of a small fault in quartzite in the Alpujarras Image:Bear Valley Slickensides.jpg|Slickensides on a fault plane, south wall of Bear Valley Strip Mine. Lens cap 5.8cm wide. File:East Kilve slickenfibres.JPG|Calcite slickenfibres on the surface of a normal fault, east of Kilve, Somerset. File:Slickenside - Corona Heights, San Francisco.jpg|Slickensides on a fault plane in Corona Heights Park, San Francisco

Text derived from https://en.wikipedia.org/w/index.php?oldid=1374575144 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.