Slip (materials science)

In materials science, slip is the large displacement of one part of a crystal relative to another part along crystallographic planes and directions.

Uses your system voice; voice and rate in settings.

≈ 4 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In materials science, slip is the large displacement of one part of a crystal relative to another part along crystallographic planes and directions. Slip occurs by the passage of dislocations on close/packed planes, which are planes containing the greatest number of atoms per area and in close-packed directions (most atoms per length).

Close-packed planes are known as slip or glide planes. A slip system describes the set of symmetrically identical slip planes and associated family of slip directions for which dislocation motion can easily occur and lead to plastic deformation. The magnitude and direction of slip are represented by the Burgers vector, .

An external force makes parts of the crystal lattice glide along each other, changing the material's geometry. A critical resolved shear stress is required to initiate a slip.

Face centered cubic crystals

Slip in face centered cubic (fcc) crystals occurs along the close packed plane. Specifically, the slip plane is of type {111}, and the direction is of type . In the diagram on the right, the specific plane and direction are (111) and [ 10], respectively.

Given the permutations of the slip plane types and direction types, fcc crystals have 12 slip systems. In the fcc lattice, the norm of the Burgers vector, b, can be calculated using the following equation: |b|= \frac {a}{2}|\langle 110\rangle|= \frac{a\sqrt 2}{2} Where a is the lattice constant of the unit cell.

Body centered cubic crystals

Slip in body-centered cubic (bcc) crystals occurs along the plane of shortest Burgers vector as well; however, unlike fcc, there are no truly close-packed planes in the bcc crystal structure. Thus, a slip system in bcc requires heat to activate. Some bcc materials (e.g. α-Fe) can contain up to 48 slip systems.

There are six slip planes of type {110}, each with two directions (12 systems). There are 24 {123} and 12 {112} planes each with one direction (36 systems, for a total of 48). Although the number of possible slip systems is much higher in bcc crystals than fcc crystals, the ductility is not necessarily higher due to increased lattice friction stresses.

While the {123} and {112} planes are not exactly identical in activation energy to {110}, they are so close in energy that for all intents and purposes they can be treated as identical. In the diagram on the right the specific slip plane and direction are (110) and [ 11], respectively. |b|= \frac {a}{2}|\langle 111\rangle|= \frac{\sqrt 3a}{2}

Hexagonal close packed crystals

s. 𝒃 and 𝒏 are the slip direction and plane, respectively, and 𝝎 is the rotation axis calculated in the present work, orthogonal to both the slip plane normal and slip direction. The crystal direction of the rotation axis vectors is labelled on the IPF colour key. ]] Slip in hexagonal close packed (hcp) metals is much more limited than in bcc and fcc crystal structures.

Usually, hcp crystal structures allow slip on the densely packed basal {0001} planes along the directions. The activation of other slip planes depends on various parameters, e.g. the c/a ratio. Since there are only 2 independent slip systems on the basal planes, for arbitrary plastic deformation additional slip or twin systems needs to be activated.

This typically requires a much higher resolved shear stress and can result in the brittle behavior of some hcp polycrystals. However, other hcp materials such as pure titanium show large amounts of ductility. Cadmium, zinc, magnesium, titanium, and beryllium have a slip plane at {0001} and a slip direction of .

This creates a total of three slip systems, depending on orientation. Other combinations are also possible. There are two types of dislocations in crystals that can induce slip - edge dislocations and screw dislocations.

Edge dislocations have the direction of the Burgers vector perpendicular to the dislocation line, while screw dislocations have the direction of the Burgers vector parallel to the dislocation line. The type of dislocations generated largely depends on the direction of the applied stress, temperature, and other factors.

Screw dislocations can easily cross slip from one plane to another if the other slip plane contains the direction of the Burgers vector.

See also

Miller indices Persistent slip bands

An online tutorial on slip, explained on DoITPoMS Difference between FCC and BCC crystals Difference between FCC and HCP crystals

Text derived from https://en.wikipedia.org/w/index.php?oldid=1374439575 under CC BY-SA 4.0; modifications have been made.

Words in each sectionHexagonal close packed …Hexagonal close packed crystalsHexagonal close packed crystals: 273 words273Body centered cubic cry…Body centered cubic crystalsBody centered cubic crystals: 175 words175Face centered cubic cry…Face centered cubic crystalsFace centered cubic crystals: 100 words100See alsoSee alsoSee also: 5 words5
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001374439575 · captured 2026-09-12 · ledger · version history

Cite this page as: encyclopegia.org, “Slip (materials science)”, snapshot enwiki-001374439575. https://encyclopegia.org/a/slip-materials-science

Sources cited in this revision

11 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.