slipstream
≈ 4 min read
Names in other languages
- 日本語スリップストリーム (コンピュータ)
- DeutschSlipstreaming
- caslipstream
- Englishslipstream
- EspañolSlipstream
- Françaisslipstream
- Italianoslipstream
- NederlandsSlipstream
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
by the slipstream of a passing car A slipstream is a region behind a moving object in which a wake of fluid (typically air or water) is moving at velocities comparable to that of the moving object, relative to the ambient fluid through which the object is moving. The term slipstream also applies to the similar region adjacent to an object with a fluid moving around it. Slipstreaming, or drafting, works because of the relative motion of the fluid in the slipstream.
by the slipstream of a passing car A slipstream is a region behind a moving object in which a wake of fluid (typically air or water) is moving at velocities comparable to that of the moving object, relative to the ambient fluid through which the object is moving. The term slipstream also applies to the similar region adjacent to an object with a fluid moving around it. Slipstreaming, or drafting, works because of the relative motion of the fluid in the slipstream.
Overview
A slipstream created by turbulent flow has a slightly lower pressure than the ambient fluid around the object. When the flow is laminar, the pressure behind the object is higher than the surrounding fluid. The shape of an object determines how strong the effect is. In general, the more aerodynamic an object is, the smaller and weaker its slipstream will be. For example, a box-like front (relative to the object's motion) will collide with the medium's particles at a high rate, transferring more momentum from the object to the fluid than a more aerodynamic object. A bullet-like profile will cause less turbulence and create a more laminar flow. A tapered rear will permit the particles of the medium to rejoin more easily and quickly than a truncated rear. This reduces lower-pressure effect in the slipstream, but also increases skin friction (in engineering designs, these effects must be balanced).
Slipstreaming
The term "slipstreaming" describes an object travelling inside the slipstream of another object (most often objects moving through the air though not necessarily flying). If an object is following another object, moving at the same speed, the rear object will require less power to maintain its speed than if it were moving independently. This technique, also called drafting, can be used by bicyclists. Following in the slipstream of another motor vehicle, or "drafting", allows for significantly improved fuel efficiency due to reduced atmospheric drag. Truck convoys are a common example, travelling on highways in a single-file queue several vehicles long. Tests of electronically coupled truck convoys have demonstrated significant fuel savings. Computational studies of two aligned vehicle models have also examined how the aerodynamic drag on both vehicles varies with the spacing between them. Auto racing drivers also use drafting to conserve fuel or attain a higher speed before attempting to overtake another driver. Auto racing drivers also draft in order to conserve fuel, the better to gain competitive advantage by reducing the frequency of fuel stops or, more often, to reach a higher speed before pulling out to attempt to overtake another driver for example, a driver tries to overtake the leading driver so he follows the rear of the leading driver, the rear driver will gain slipstream causing the whole vehicle to gain more speed than the leading driver. A related effect used for lift rather than drag reduction is vortex surfing for airborne objects. The extended formations (V formation) or "skeins" in which many migratory birds (especially geese) fly enable the birds (except, of course, the bird at the front) to use vortex surfing to take advantage of one another's vortices. Other birds (for example cormorants) that typically fly in close formation, even on short journeys, are probably also exploiting this effect. Using wingtip devices to reduce induced drag caused by wingtip vortices has been tested for aircraft, and could save 10%–29% fuel.
See also
Drafting or slipstreaming as used in sports such as cycling and motor racing Peloton
References
Forces and Moments: Spiral Slipstream
Text derived from https://en.wikipedia.org/w/index.php?oldid=1372087727 under CC BY-SA 4.0; modifications have been made.