Slugcatcher
≈ 3 min read
Names in other languages
- ItalianoSlug catcher
- EnglishSlugcatcher
- فارسیلختهگیری
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A slugcatcher is a unit in a gas refinery (or other aspect of the petroleum industry) in which "slugs" are collected or caught at the outlet of pipelines. A slug is a large quantity of a liquid that exists in a multi-phase pipeline.
A slugcatcher is a unit in a gas refinery (or other aspect of the petroleum industry) in which "slugs" are collected or caught at the outlet of pipelines. A slug is a large quantity of a liquid that exists in a multi-phase pipeline. A finger type slug catcher consists of several long pieces of pipe ('fingers'), which together form the buffer volume. The advantage of this type of slug catcher is that pipe segments are simpler to design for high pressures, which are often encountered in pipeline systems, than a large vessel. A disadvantage is that its footprint can become excessively large. An example of a large finger-type slug catcher can be seen in Den Helder, The Netherlands, using Google Maps. The incoming pipeline containing gas and liquid is routed to the inlet of the slug catcher. The inlet comprises a large diameter manifold and splitter section where the gas/liquid is divided into 2, 4, 6 or 8 horizontal pipes of 24, 30, 36, 42 or 48-inch diameter. Gas/liquid separation takes place in these pipes with the liquid dropping to the bottom of the pipes with the gas above. Liquid-free gas is drawn off at the far end of the separation pipes by risers at the top of the pipes. The risers are manifolded together and the gas is routed to further treatment. From the base of the separation pipes liquids flow through down-comers into a further, lower array of horizontal pipes. These pipes slope down away from the inlet, they can typically be 100 to 250 metres in length. The initial section of the lower pipes provides for further gas/liquid separation and the far end provides a buffer storage volume for the liquids which are drawn off at a steady rate for further treatment. The operating pressure in the slug catcher is maintained by a pressure controller and pressure control valve in the gas outlet. The liquid level in the storage end of the slug catcher is controlled by a liquid level controller and level control valve in the liquid outlet. A Parking Loop slug catcher combines features of the vessel and finger types. The Gas/Liquid Separation occurs in the Vessel, while the Liquid is stored in the parking loop shaped fingers. A Hybrid Slug Catcher combines the high efficiency of a vessel separator and the large storage volume of a harp slug catcher.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1314433175 under CC BY-SA 4.0; modifications have been made.