Small hydro
≈ 10 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Small hydro is the generation of hydroelectric power on a smaller scale as compared to traditional large-scale hydro. Exact definitions vary by country, but small hydro power (SHP) projects are typically less than 50 megawatts (MW) and can be further subdivided by scale into "mini" (<500 kW), "micro" (<100 kW), and "pico" (<10 kW). Maximum power generation capacity is the primary factor of SHP classification. Factors like dam height, weir height, reservoir area, outlet structures and operating procedures are not standardized under this metric. SHP projects have grown rapidly in the past two decades. Quicker permitting processes can make them easier to develop and contribute to distributed generation in a regional electricity grid. Small hydro projects may be built in isolated areas that would be uneconomic to serve from a national electricity grid, or in areas where a national grid does not exist. They produce power on a scale suitable for local community use, promoting energy independence. Rural areas face challenges in SHP integration due to an absence of political focus, accurate data, and sustainable funding. The exact socio-environmental effects of smaller scale hydro are not yet fully understood. Many countries do not require environmental impact assessments for smaller installations.
Small hydro is the generation of hydroelectric power on a smaller scale as compared to traditional large-scale hydro. Exact definitions vary by country, but small hydro power (SHP) projects are typically less than 50 megawatts (MW) and can be further subdivided by scale into "mini" (<500 kW), "micro" (<100 kW), and "pico" (<10 kW). Maximum power generation capacity is the primary factor of SHP classification. Factors like dam height, weir height, reservoir area, outlet structures and operating procedures are not standardized under this metric. SHP projects have grown rapidly in the past two decades. Quicker permitting processes can make them easier to develop and contribute to distributed generation in a regional electricity grid. Small hydro projects may be built in isolated areas that would be uneconomic to serve from a national electricity grid, or in areas where a national grid does not exist. They produce power on a scale suitable for local community use, promoting energy independence. Rural areas face challenges in SHP integration due to an absence of political focus, accurate data, and sustainable funding. The exact socio-environmental effects of smaller scale hydro are not yet fully understood. Many countries do not require environmental impact assessments for smaller installations.
Description
The use of the term "small hydro" varies considerably around the world. In India, hydro projects with up to 25 MW capacities are categorized as Small Hydro Power (SHP) projects. In California, hydroelectric generating stations with a maximum capacity of less than 30 MW are classified as small and are eligible for inclusion in the state's renewable portfolio standard. The maximum limit is usually somewhere between 10 and 30 MW and is stretched up to 50 MW in Canada, China, Pakistan, and the United States. A variety of project designs can be implemented for hydro projects with similar energy capacities. Some SHP projects utilize a run-of-river system. Others, such as the Iron Gate Dam, utilize impoundment systems which host the disadvantages associated with reservoirs. For investors, environmentalists, and policy makers small hydro projects are considered most viable when there is little ecological impact and projected profit after construction.
Growth
Between 2005 and 2010, China planned to electrify a further 10,000 villages under their China Village Electrification Program, including further investments in small hydro and photovoltaics. By 2010, China had 45,000 small hydro installations, especially in rural areas, producing 160 Twh annually. Over 50% of the world's potential small hydro power was found in Asia; however, a report noted that "It is possible in the future that more small hydropower potential might be identified both on the African and American continents". In the mountains and rain forests of British Columbia, Canada there are a great many sites suitable for hydro development. However environmental concerns towards large reservoirs after the 1980s halted new dam construction. The solution to coping with increased demand was to offer contracts to independent power producers, who have built 100 run of the river projects under 50 MW. Power production without reservoirs varies dramatically, but older conventional dams retain or release water to average out production though the year. In 2014 these independent producers generated 18,000 GWh from 4,500 MW of capacity. As of 2022, the global capacity (for projects ≤10 MW) is approximately 79.0 GW, with China holding over 53% of the world's SHP installed capacity. Under this definition (≤10 MW), installed SHP capacity increased by 11% in the Americas from 2019 to 2022. Because of local differences in SHP definitions, it is likely that the installed capacity of SHPs across the globe is higher than these totals. Countries such as China, India, and Brazil, are significantly expanding their small hydro capacity in the 21st century. The continents of Asia, Africa and the Americas hold the most potential for small hydro power growth. .
Generation
with original equipment of 1920 in Ottenbach, Switzerland, still running for guided visits , has a design typical for small hydro stations in the western part of China's Hubei Province. Water comes from the mountain behind the station, through the black pipe seen in the photo Hydroelectric power is the generation of electric power from the movement of water. A hydroelectric facility requires a dependable flow of water and a reasonable height for the water to fall, called the head. In a typical installation, water is fed from a reservoir through a pipe into a turbine. The water flowing through the turbine causes an electrical generator to rotate, converting the motion into electrical energy. Small hydro projects may be created from the re-development of existing dams whose primary purpose is flood control or irrigation. Old hydro sites may also be re-developed with water rights re-used, salvaging substantial investment in installation technology such as penstock pipe and turbines. Either of these cost saving advantages can make the return on investment for a small hydro site well worth the use of existing sites. Brazil is another country which is investing heavily in small hydro. Brazil itself is a leader in hydroelectric generation, the world's third most hydropower installed capacity country at 79 GW, behind the United States at 100 GW, and China in first place with 171 GW. 51 new small hydro projects are, as of 2024, being constructed in Brazil.
Project design
Many companies offer standardized turbine generator packages in the approximate size range of 200 kW to 10 MW. These "water to wire" packages simplify the planning and development of the site since one vendor looks after most of the equipment supply. Because non-recurring engineering costs are minimized and development cost is spread over multiple units, the cost of such package systems is reduced. While synchronous generators capable of isolated plant operation are often used, small hydro plants connected to an electrical grid system can use economical induction generators to further reduce installation cost and simplify control and operation. Small "run of the river" projects do not have a conventional dam with a reservoir, only a weir to form a headpond for diversion of inlet water to the turbine. Unused water simply flows over the weir and the headpond may only be capable of a single day's storage, not enough for dry summers or frozen winters when generation may come to a halt. A preferred scenario is to have the inlet in an existing lake. Modular "micro hydrokinetic" systems have been developed for irrigation canals. "Irrigation districts across the U.S. have installed power plants at diversion points and in-canal drops, which are traditionally used for flow measurement, to stabilize upstream heads and to dissipate energy where there is significant elevation change throughout the canal system." Countries like India and China have policies in favor of small hydro, and the regulatory process allows for building dams and reservoirs. In North America and Europe the regulatory process is too long and expensive to consider having a dam and a reservoir for a small project. Small hydro projects usually have faster environmental and licensing procedures, and since the equipment is usually in serial production, standardized and simplified, and the civil works construction is also reduced, the projects may be developed very rapidly. The physically smaller size of equipment makes it easier to transport to remote areas without good road or rail access. One measure of decreased environmental impact with lakes and reservoirs depends on the balance between stream flow and power production. Reducing water diversions helps the river's ecosystem, but reduces the hydro system's return on Investment (ROI). The hydro system design must strike a balance to maintain both the health of the stream and the economics. Part of the balance between a small hydro project's return on investment and environmental concern is the proximity of the project to the national power grid. The more isolated a small hydro project is the more cost effective its construction will be.
Sample list of small installations worldwide
Africa Zengamina, a 700 kW plant in Kalene Hill, Mwinilunga District in northwestern Zambia. 2008 Asia Meenvallam Small Hydroelectric Project, Palakkad district, Kerala, India. Bario Asal & Arur Layun Micro-Hydro Community Project, Kelabit Highlands, Sarawak, Malaysia. 2009 Ambangal Mini Hydro Electric Power Plant, Kiangan, Ifugao, Philippines (2010) Asiga River Mini Hydro Electric Power Plant, Santiago, Agusan del Norte, Philippines (2019) Balongbong Mini Hydro Electric Power Plant, Bato, Catanduanes, Philippines (1983) Cantingas Mini Hydro Electric Power Plant, San Fernando, Romblon, Philippines (2009) Likud Mini Hydro Electric Power Plant, Asipulo and Kiangan, Ifugao, Philippines (2015) New Bataan Hydro Electric Power Plant, New Bataan, Davao de Oro, Philippines (2018) San Luis Mini Hydro Electric Power Plant, San Luis, Aurora, Philippines (2011) Villasiga Mini Hydro Electric Power Plant, Bugasong, Antique, Philippines (2016) Pakpattan Hydro Power Project, a 2.82 MW plant on Pakpattan Canal in Pakpattan District, Pakistan 2015 Europe Green Valleys Project, Brecon Beacons National Park, Wales. Joint winner of £300K in Big Green Challenge 2009. St Catherine's, a National Trust site near Windermere, Westmorland, United Kingdom. North America Ames Hydroelectric Generating Plant, Colorado, United States. On the List of IEEE Milestones Childs-Irving Hydroelectric Facilities, Arizona, United States. 1916 Now decommissioned Snoqualmie Falls, Washington, United States. 1957 Malibu Hydro, British Columbia, Canada. 2005 Menihek Hydroelectric Generating Station, Newfoundland and Labrador, Canada. 1954 Cloudworks Energy is one of many Independent power producers that have built projects in British Columbia, Canada
See also
Electricity generation Hydro power Low head hydro power Micro hydro up to 100 kW Pico hydro up to 5 kW Conduit hydroelectricity International Center on Small Hydro Power
References
Text derived from https://en.wikipedia.org/w/index.php?oldid=1370443090 under CC BY-SA 4.0; modifications have been made.