Smith & Wesson Centennial

S&W Centennial is a family of revolvers made by Smith & Wesson on the "J-Frame".

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

S&W Centennial is a family of revolvers made by Smith & Wesson on the "J-Frame".

History

The original Centennial Model 40 was introduced in 1952, and was named for the company's 100th anniversary.

Model 40

The Smith & Wesson Model 40 originally debuted as the Centennial in 1952 and was renamed the Model 40 in 1957. The Model 40 is chambered in .38 special and has a five-round capacity. It is a snub-nose revolver with a 1 7/8-inch barrel.

It is built on Smith & Wesson's J-frame and weighs 21 oz. empty. The revolver was made with a grip safety as some shooters could not get used to the idea of firing a revolver without cocking the hammer. Smith & Wesson reintroduced this model in 2007 as a collector's piece with some models featuring a case hardened finish by Doug Turnbull.

Model 640

The Model 640 has been in production since 1990 and was chambered for .38 Special. It was fitted with a standard barrel of 1-7/8 inch length. The second model had a slightly heavier and longer barrel of 2-1/8 inch length.

A 3" barreled version was offered until 1993, when it was dropped from production. In 1996 S&W began chambering the 640 in .357 Magnum. Because of the power of the .357 magnum cartridge, the frame is strengthened just in front of the cylinder release on those models.

Model 442

From 1993 through 1996, the 442 was made with a satin nickel finish. The 442 has an aluminum frame and blued carbon steel cylinder.

Model 940

In 1991 S&W introduced the Model 940, similar in appearance to the 640, but chambered in 9mm Luger. Use of a moon clip is required to headspace and extract the rimless 9mm cartridges. The 940 could also chamber and extract the short-lived 9mm Federal (9×19mmR) rimmed cartridge.

From 1991 to 1992, a 3-inch barreled version was available. In 1998, the 940 was dropped from production. In August 2025, Smith & Wesson reintroduced the 940 after a 27-year hiatus.

Model 340

In 2001 an aluminium-scandium alloy framed version was introduced in .357 Magnum designated as the Model 340. This revolver weighs 10.9 ounces.

The Smith & Wesson Centennial, History and Development. Review of the Smith & Wesson Model 642CT. Ballistics By The Inch tests of the .38 Special cartridge.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375989780 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.