Lesson plan

Snapback (electrical)

Snapback is a mechanism in a bipolar transistor in which avalanche breakdown or impact ionization provides a sufficient base current to turn on the transistor. It is used intentionally in the design of certain ESD protection devices integrated onto semiconductor chips. It can also be a parasitic failure mechanism when activated inadvertently, outwardly appearing much like latchup in that the chip seems to suddenly blow up when a high voltage is applied. Snapback is initiated by a small current from collector to base. In the case of ESD protection devices, this current is caused by avalanche breakdown due to a sufficiently large voltage applied across the collector-base junction. In the case of parasitic failures, the initiating current may result from inadvertently turning on the bipolar transistor and a sufficiently large voltage across the collector and base causing impact ionization, with some of the generated carriers then acting as the initiating current as they flow into the base. Once this initiating current flows into the base, the transistor turns on and the collector voltage decreases to the snapback holding voltage.…

Back to article

Article summary

Snapback is a mechanism in a bipolar transistor in which avalanche breakdown or impact ionization provides a sufficient base current to turn on the transistor. It is used intentionally in the design of certain ESD protection devices integrated onto semiconductor chips. It can also be a parasitic failure mechanism when activated inadvertently, outwardly appearing much like latchup in that the chip seems to suddenly blow up when a high voltage is applied. Snapback is initiated by a small current from collector to base. In the case of ESD protection devices, this current is caused by avalanche breakdown due to a sufficiently large voltage applied across the collector-base junction. In the case of parasitic failures, the initiating current may result from inadvertently turning on the bipolar transistor and a sufficiently large voltage across the collector and base causing impact ionization, with some of the generated carriers then acting as the initiating current as they flow into the base. Once this initiating current flows into the base, the transistor turns on and the collector voltage decreases to the snapback holding voltage.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.