Snorkeling

s on a coral reef near Fiji Snorkeling (snorkelling in British and Commonwealth English) is the practice of swimming face-down in a body of water while breathing the ambient air through a shaped tube called a snorkel, usually with swimming…

Uses your system voice; voice and rate in settings.

Snapshot

≈ 12 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

s on a coral reef near Fiji Snorkeling (snorkelling in British and Commonwealth English) is the practice of swimming face-down in a body of water while breathing the ambient air through a shaped tube called a snorkel, usually with swimming goggles or a diving mask, and swimfins. In cooler waters, a wetsuit is also worn.

The use of this equipment allows the snorkeler (British and Commonwealth English spelling: snorkeller) to observe the underwater environment for extended periods with relatively little effort, and to breathe while face-down at the surface. Snorkeling is a popular recreational activity, particularly at tropical resort locations.

It provides the opportunity to observe underwater life in a natural setting without the complicated equipment and training required for scuba diving. It appeals to all ages because of how little effort is involved and is the basis of the two surface disciplines of the underwater sport of finswimming.

Snorkeling is also used by scuba divers when at the surface, in underwater sports such as underwater hockey and underwater rugby, and as part of water-based searches conducted by search and rescue teams.

Equipment

Essential equipment includes the snorkel for breathing, and a diving mask or swimming goggles for vision. Swimfins for more efficient propulsion are common. Environmental protection against cold, sunburn, and marine stings and scratches is also regionally popular, and may be in the form of a wetsuit, dry suit, dive skins, or rash vest.

Some snorkelers rely on waterproof sunscreen lotions, but some of these are environmentally damaging. If necessary, the snorkeler may wear a weightbelt to facilitate freediving, or an inflatable snorkeling vest, a form of buoyancy aid, for safety.

Full-face snorkel mask

's Easybreath snorkel mask An integrated snorkel consists essentially of a tube topped with a shut-off valve and opening at the bottom into the interior of a diving mask. Integrated snorkels must be fitted with valves to shut off the snorkel's air inlet when submerged. Water will otherwise pour into the opening at the top and flood the interior of the mask.

Snorkels are attached to sockets on the top or the sides of the mask. New-generation snorkel masks are full-face masks covering the eyes, the nose, and the mouth. They enable surface snorkelers to breathe nasally or orally and may be a workaround in the case of surface snorkelers who gag in response to the presence of standard snorkel mouthpieces in their mouths.

Some early snorkel masks are full-face masks covering the eyes, nose, and mouth, while others exclude the mouth, covering the eyes and the nose only. The 1950s US Divers "Marino" hybrid comprised a single snorkel mask with eye and nose coverage and a separate snorkel for the mouth.

Full-face snorkel masks use an integral snorkel with separate channels for intake and exhaled gases theoretically ensuring the user is always breathing untainted fresh air whatever the respiratory effort. They come with a built-in dry top snorkel system.

In addition to a standard ball float system that stops the water from entering the tube when submerged, full-face masks are designed in such a way that even if a small amount of water does get into the snorkel, it will be channeled away from the face and into the chin area of the mask. A special valve located on the bottom of the chin allows to drain the water out.

The main problem is that it must fit the whole face well enough to make a reliable seal and since no two faces are the same shape, it may not seal adequately on any specific user. In the event of accidental flooding, the whole mask must be removed to continue breathing.

Unless the snorkeler is able to equalize without pinching their nose it can only be used on or within several feet of the surface, since the mask covers the nose with a rigid plastic structure, which makes it impossible to pinch the nose if needed to equalize pressure at greater depth. Trained scuba divers are likely to avoid such devices, however, snorkel masks are a boon for those with medical conditions that preclude taking part in scuba diving.

As a result of a short period with an unusually high number of snorkeling deaths in Hawaii there is some suspicion that the design of the masks can result in buildup of excess CO 2 . It is far from certain that the masks are at fault, but the state of Hawaii has begun to track the equipment being used in cases of snorkeling fatalities.

Besides the possibility that the masks, or at least some brands of the mask, are a cause, other theories include the possibility that the masks make snorkeling accessible to people who have difficulty with traditional snorkeling equipment. That ease of access may result in more snorkelers who lack experience or have underlying medical conditions, possibly exacerbating problems that are unrelated to the type of equipment being used.

During the 2019–20 coronavirus pandemic related shortages, full-face snorkel masks were adapted to create oxygen dispensing emergency respiratory masks by deploying 3D printing and carrying out minimal modifications to the original mask. Italian healthcare legislation required patients to sign a declaration of acceptance of use of an uncertified biomedical device when they were given the modified snorkel mask for respiratory support interventions in the country's hospitals.

France's main sportwear and snorkel masks producer Decathlon paused its sale of snorkel masks, redirecting them instead toward medical staff, patients and 3D printer operations. On 29 October 2024, the British Standards Institution published the world's first national standard on full-face snorkel masks.

Diving mask

Snorkelers normally wear the same kind of mask as those worn by scuba divers. By creating an airspace, the mask enables the snorkeler to see clearly underwater. All scuba diving masks consist of the lenses also known as a faceplate, a soft rubber skirt, which encloses the nose and seals against the face, and a head strap to hold it in place.

There are different styles and shapes. These range from oval shaped models to lower internal volume masks and may be made from different materials; common choices are silicone and rubber. A snorkeler who remains at the surface can use swimmer's goggles which do not enclose the nose.

Swimfins

Swimfins, fins or flippers are fin-like accessories worn on the feet, and usually made from rubber or plastic, to aid movement through the water in water sports activities. Swimfins help the wearer to move through water more efficiently, as human feet are too small and inappropriately shaped to provide much thrust, especially when the wearer is carrying equipment that increases hydrodynamic drag.

Very long fins and monofins used by freedivers as a means of underwater propulsion do not require high-frequency leg movement. This improves efficiency and helps to minimize oxygen consumption. Short, stiff-bladed fins are effective for short bursts of acceleration and maneuvering.

Open-backed fins allow the wearer to wear them over the top of wetsuit socks or boots which can be useful in cooler water.

Exposure protection

A wetsuit is a garment, usually made of foamed neoprene with a knit fabric facing, which is worn by people engaged in water sports and other activities in or on water, primarily providing thermal insulation, but also buoyancy and protection from abrasion, ultraviolet exposure and stings from marine organisms. The insulation properties depend on bubbles of gas enclosed within the material, which reduce its ability to conduct heat.

The bubbles also give the wetsuit a low density, providing buoyancy in water. The thickness, fit and coverage of the suit are important factors for insulation. Wetsuit protection can be extended to cover the head, feet and hands with the addition of a hood, gloves, socks or boots.

Back in the 1950s and early 1960s, snorkeling was often undertaken wearing a one-piece or two-piece thin-rubber valveless dry suit. In the new millennium, the use of drysuits in snorkelling is seeing something of a resurgence, thanks to the growing popularity of "wilderness swimming" or "wildswimming" in seas, lakes and rivers.

Dive skins are used when diving in water temperatures above . They are usually one piece full length garments made from spandex or Lycra and provide little thermal protection, but do protect the skin from jellyfish stings, abrasion and sunburn. This kind of suit is also known as a 'Stinger Suit'.

Some divers wear a dive skin under a wetsuit, which allows easier donning and (for those who experience skin problems from neoprene) provides additional comfort. A rash guard, also known as rash vest or rashie, is an athletic shirt made of spandex and nylon or polyester.

The name rash guard reflects the fact that the shirt protects the wearer against rashes caused by abrasion, or by sunburn from extended exposure to the sun. These shirts can be worn by themselves, or under a wetsuit. A rash guard by itself is used for light coverage in warm to extreme summer temperatures for several watersports including snorkeling.

There are also lower body rash guards, which are similar to compression shorts designed to be worn underneath the surfer's boardshorts.

Weight belt

Weight belts are the most common weighting system currently in use for snorkeling. They are generally made of tough nylon webbing, but other materials such as rubber can be used. Weight belts for snorkeling are generally fitted with a quick release buckle to allow the dumping of weight rapidly in an emergency.

The most common design of weight used with a belt is rectangular lead blocks with two slots in them threaded onto the belt. These blocks can be coated in plastic, which increases corrosion resistance. The plastic coated weights may be marketed as being less abrasive to wetsuits.

The weights may be constrained from sliding along the webbing by metal or plastic belt sliders. Another popular style has a single slot through which the belt can be threaded. These are sometimes locked in position by squeezing the weight to grip the webbing, but this makes them difficult to remove when less weight is needed.

There are also weight designs which may be added to the belt by clipping on when needed. The amount of weight needed depends mainly on the buoyancy of the wet suit.

Snorkeling vest

An inflatable personal buoyancy aid designed for surface swimming applications. In shape, often like a horse-collar buoyancy compensator, or airline life jacket, but only with oral inflation or a CO 2 cartridge for emergencies.

Snorkeling locations

, O'ahu, Hawaii, in 1973 , Mexico Snorkeling is possible in almost any body of water, but snorkelers are more likely to be found in locations where the water is warm, waves are small and there is something particularly interesting to see near the surface such as a reef or a shipwreck. Generally shallow reefs ranging from are favored by snorkelers.

Enough water cover to swim over the top without kicking the bottom is needed, but isolated shallow structure can be approached from the sides. Deeper reefs can also be explored, but repeated breath-holding to dive to those depths limits the number of practitioners, and raises the bar on the required fitness and skill level.

Risk increases with increased depth and duration of the breath-hold excursions from the surface. Some less commonly snorkeled bodies of water include sinkholes, lakes and rivers. Snorkeling locations are often listed and described in publications promoting both diving and snorkeling in a particular region.

Lonely Planet has published many of these, including several focusing on nations in the Caribbean. The Great Barrier Reef, Mexico, Belize, Bonaire, the Bahamas, Galápagos Islands, Hawaiian Islands and Indonesia are some of the most loved snorkeling destinations in the world.

Bog snorkeling: An individual sport, popular in the United Kingdom and Australia. Finswimming: An individual competitive speed and endurance sport, the most popular competitive sport of CMAS, the only sport of this federation present in World Games. Finswimmers use a slightly different snorkel, suited for hydrodynamics and speed.

Free-diving: Any form of diving without breathing apparatus, but often referring to competitive apnea as a sport. Scuba diving: A form of untethered diving using a self-contained portable breathing apparatus, frequently as a pastime. Spearfishing: Fishing with a spear often with snorkeling equipment, either for competitive sport or to obtain food.

Underwater hockey: A competitive team-sport played in swimming pools using snorkeling equipment, sticks and a puck. Underwater rugby: A competitive team-sport played in deeper swimming pools using snorkeling equipment, baskets and a ball.

British Sub-Aqua Club site on snorkeling National Parks Conservation Association page on snorkeling. Archived from the original US patent 1901219, Joseph L. Belcher, "Breathing apparatus", issued . Earliest known patent for snorkel.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1368460728 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

27 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.