Lesson plan
Sofim 8140 engine
The 8140 was a diesel engine made by Sofim for cars. Originally introduced as a swirl chamber, naturally aspirated diesel it was mostly used in commercial vehicles worldwide. At the time of introduction, the 8140's overhead camshaft layout (driven by a toothed timingbelt) was unexpected in a diesel engine, which were typically overhead valve designs. Turbocharging the original engine, the design of which was finished in 1974, was impeded until 1985 due to restrictions of the original design. Heat flux issues with the aluminium head and swirl chambers were eventually overcome, but did slow down development. Before entering the market, Fiat tested the Sofim engine in its 131 model during the 1977 London-Sydney Marathon. First direct injection models also appeared in the mid-1980s. Additionally to the Fiat designation 8140 some engines got a Renault tag (S8 for indirect injection, S9 for direct injection).
Article summary
The 8140 was a diesel engine made by Sofim for cars. Originally introduced as a swirl chamber, naturally aspirated diesel it was mostly used in commercial vehicles worldwide. At the time of introduction, the 8140's overhead camshaft layout (driven by a toothed timingbelt) was unexpected in a diesel engine, which were typically overhead valve designs. Turbocharging the original engine, the design of which was finished in 1974, was impeded until 1985 due to restrictions of the original design. Heat flux issues with the aluminium head and swirl chambers were eventually overcome, but did slow down development. Before entering the market, Fiat tested the Sofim engine in its 131 model during the 1977 London-Sydney Marathon. First direct injection models also appeared in the mid-1980s. Additionally to the Fiat designation 8140 some engines got a Renault tag (S8 for indirect injection, S9 for direct injection).
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.