Soil production function

Article summary

Soil production function refers to the rate of bedrock weathering into soil as a function of soil thickness. A general model suggests that the rate of physical weathering of bedrock (de/dt) can be represented as an exponential decline with soil thickness: de/dt = P_0 \exp{[-k h]} where h is soil thickness [m], P 0 [mm/year] is the potential (or maximum) weathering rate of bedrock and k [m −1 ] is an empirical constant. The reduction of weathering rate with thickening of soil is related to the exponential decrease of temperature amplitude with increasing depth below the soil surface, and also the exponential decrease in average water penetration (for freely-drained soils). Parameters P 0 and k are related to the climate and type of parent material. The value of P 0 was found to range from 0.08 to 2.0 mm/yr for sites in northern California, and 0.05–0.14 mm/yr for sites in southeastern Australia. Meanwhile values of k do not vary significantly, ranging from 2 to 4 m −1 . Several landscape evolution models have adopted the so-called humped model. This model dates back to G.K. Gilbert's Report on the Geology of the Henry Mountains (1877). Gilbert reasoned that the weathering of bedrock was fastest under an intermediate thickness of soil and slower under exposed bedrock or under thick mantled soil. This is because chemical weathering requires the presence of water.…

Key claims

No claims recorded.

Discussion questions

1. Summarise the article in your own words. Which single claim would you verify first, and why?
2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.