Solid

original song written, composed, and performed by Ashford & Simpson

line form of solid insulin. Solid is a state of matter in which atoms are closely packed and are difficult to move past each other. Solids resist compression, expansion, or external forces that would alter its shape, with the degree of resistance being dependent upon the specific material under consideration. Solids also always possess the least kinetic energy per atom/molecule relative to other phases or, equivalently stated, solids are formed when matter in a fluid phase (liquid or gas) is cooled below a certain temperature. This temperature is called the melting point of the substance and is an intrinsic property; i.e. independent of how much of the matter there is. The vast majority of substances, when in the solid state, can be arranged in one of a few ubiquitous structures. Solids are characterized by structural rigidity and resistance to applied external forces and pressure. Unlike liquids, solids do not flow to take on the shape of their container, nor do they expand to fill the entire available volume like a gas. Much like the other three fundamental phases, solids also expand when heated, the thermal energy put into increasing the distance and reducing the potential energy between atoms. However, solids do this to a much lesser extent. When heated to their melting point or sublimation point, solids melt into a liquid or sublimate directly into a gas, respectively. For solids that directly sublimate into a gas, the melting point is replaced by the sublimation point. As a rule of thumb, melting will occur if the subjected pressure is higher than the substance's triple point pressure, and sublimation will occur otherwise. Melting and melting points refer exclusively to transitions between solids and liquids. Melting occurs across a great extent of temperatures, ranging from 0.10 K for helium-3 under 30 bars (3 MPa) of pressure, to around 4,100 K at 1 atm for the composite refractory material hafnium carbonitride. The atoms in a solid are tightly bound to each other in one of two ways: regular geometric lattices called crystalline solids (e.g. metals, water ice), or irregular arrangements called amorphous solids (e.g. glass, plastic). Molecules and atoms forming crystalline lattices usually organize themselves in a few well-characterized packing structures, such as body-centered cubic. The adopted structure can and will vary between various pressures and temperatures, as can be seen in phase diagrams of the material (e.g. that of water, see left and upper). When the material is composed of a single species of atom/molecule, the phases are designated as allotropes for atoms (e.g. diamond and graphite for carbon), and as polymorphs (e.g. calcite and aragonite for calcium carbonate) for molecules. Non-porous solids invariably strongly resist any amount of compression that would otherwise result in a decrease of total volume regardless of temperature, owing to the mutual repulsion of neighboring electron clouds among its constituent atoms. In contrast to solids, gases are very easily compressed as the molecules in a gas are far apart with few intermolecular interactions. Some solids, especially metallic alloys, can be deformed or pulled apart with enough force. The degree to which this solid resists deformation in differing directions and axes are quantified by the elastic modulus, tensile strength, specific strength, as well as other measurable quantities, and overall by compressibility. For the vast majority of substances, the solid phases have the highest density, moderately higher than that of the liquid phase (if there exists one), and solid blocks of these materials will sink below their liquids. Exceptions include water (see e.g. icebergs), gallium, and plutonium. All naturally occurring elements on the periodic table have a melting point at standard atmospheric pressure, with three exceptions: the noble gas helium, which remains a liquid even at absolute zero owing to zero-point energy; the metalloid arsenic, sublimating around 900 K; and the life-forming element carbon, which sublimates around 3,950 K. When applied pressure is released, solids will (very) rapidly re-expand and release the stored energy in the process in a manner somewhat similar to those of gases. An example of this is the (oft-attempted) confinement of freezing water in a container that is inflexible (made of steel, for example). The gradual freezing results in an increase in volume, as ice is less dense than water. With no additional volume to expand into, water ice subjects the interior to intense pressures, causing the container to explode with great force. Solids' properties on a macroscopic scale can also depend on whether it is contiguous or not. Contiguous (non-aggregate) solids are characterized by structural rigidity (as in rigid bodies) and strong resistance to applied forces. For solids aggregates (e.g. gravel, sand, dust on lunar surface ), solid particles can easily slip past one another, though changes of individual particles (quartz particles for sand) will still be greatly hindered. This leads to a perceived softness and ease of compression by operators. An illustrating example is the non-firmness of coastal sand and of the lunar regolith. The branch of physics that deals with solids is called solid-state physics, and is a major branch of condensed matter physics (which includes liquids). Materials science, also one of its numerous branches, is primarily concerned with the way in which a solid's composition and its properties are intertwined. ===Glass ceramics=== . Glass-ceramic materials share many properties with both non-crystalline glasses and crystalline ceramics. They are formed as a glass, and then partially crystallized by heat treatment, producing both amorphous and crystalline phases so that crystalline grains are embedded within a non-crystalline intergranular phase. Glass-ceramics are used to make cookware (originally known by the brand name CorningWare) and stovetops that have high resistance to thermal shock and extremely low permeability to liquids. The negative coefficient of thermal expansion of the crystalline ceramic phase can be balanced with the positive coefficient of the glassy phase. At a certain point (~70% crystalline) the glass-ceramic has a net coefficient of thermal expansion close to zero. This type of glass-ceramic exhibits excellent mechanical properties and can sustain repeated and quick temperature changes up to 1000 °C. Glass ceramics may also occur naturally when lightning strikes the crystalline (e.g. quartz) grains found in most beach sand. In this case, the extreme and immediate heat of the lightning (~2500 °C) creates hollow, branching rootlike structures called fulgurite via fusion. ===Composite materials=== as it heats up to over 1500 °C during re-entry filaments, a common element in composite materials Composite materials contain two or more macroscopic phases, one of which is often ceramic. For example, a continuous matrix, and a dispersed phase of ceramic particles or fibers. Applications of composite materials range from structural elements such as steel-reinforced concrete, to the thermally insulative tiles that play a key and integral role in NASA's Space Shuttle thermal protection system, which is used to protect the surface of the shuttle from the heat of re-entry into the Earth's atmosphere. One example is Reinforced Carbon-Carbon (RCC), the light gray material that withstands reentry temperatures up to and protects the nose cap and leading edges of Space Shuttle's wings. RCC is a laminated composite material made from graphite rayon cloth and impregnated with a phenolic resin. After curing at high temperature in an autoclave, the laminate is pyrolized to convert the resin to carbon, impregnated with furfural alcohol in a vacuum chamber, and cured/pyrolized to convert the furfural alcohol to carbon. In order to provide oxidation resistance for reuse capability, the outer layers of the RCC are converted to silicon carbide. Domestic examples of composites can be seen in the "plastic" casings of television sets, cell-phones and so on. These plastic casings are usually a composite made up of a thermoplastic matrix such as acrylonitrile butadiene styrene (ABS) in which calcium carbonate chalk, talc, glass fibers or carbon fibers have been added for strength, bulk, or electro-static dispersion. These additions may be referred to as reinforcing fibers, or dispersants, depending on their purpose. Thus, the matrix material surrounds and supports the reinforcement materials by maintaining their relative positions. The reinforcements impart their special mechanical and physical properties to enhance the matrix properties. A synergism produces material properties unavailable from the individual constituent materials, while the wide variety of matrix and strengthening materials provides the designer with the choice of an optimum combination. ===Semiconductors=== Semiconductors are materials that have an electrical resistivity (and conductivity) between that of metallic conductors and non-metallic insulators. They can be found in the periodic table moving diagonally downward right from boron. They separate the electrical conductors (or metals, to the left) from the insulators (to the right). Devices made from semiconductor materials are the foundation of modern electronics, including radio, computers, telephones, etc. Semiconductor devices include the transistor, solar cells, diodes and integrated circuits. Solar photovoltaic panels are large semiconductor devices that directly convert light into electrical energy. In a metallic conductor, current is carried by the flow of electrons, but in semiconductors, current can be carried either by electrons or by the positively charged "holes" in the electronic band structure of the material. Common semiconductor materials include silicon, germanium and gallium arsenide. ===Nanomaterials=== Many traditional solids exhibit different properties when they shrink to nanometer sizes. For example, nanoparticles of usually yellow gold and gray silicon are red in color; gold nanoparticles melt at much lower temperatures (~300 °C for 2.5 nm size) than the gold slabs (1064 °C); and metallic nanowires are much stronger than the corresponding bulk metals. The high surface area of nanoparticles makes them extremely attractive for certain applications in the field of energy. For example, platinum metals may provide improvements as automotive fuel catalysts, as well as proton exchange membrane (PEM) fuel cells. Also, ceramic oxides (or cermets) of lanthanum, cerium, manganese and nickel are now being developed as solid oxide fuel cells (SOFC). Lithium, lithium-titanate and tantalum nanoparticles are being applied in lithium-ion batteries. Silicon nanoparticles have been shown to dramatically expand the storage capacity of lithium-ion batteries during the expansion/contraction cycle. Silicon nanowires cycle without significant degradation and present the potential for use in batteries with greatly expanded storage times. Silicon nanoparticles are also being used in new forms of solar energy cells. Thin film deposition of silicon quantum dots on the polycrystalline silicon substrate of a photovoltaic (solar) cell increases voltage output as much as 60% by fluorescing the incoming light prior to capture. Here again, surface area of the nanoparticles (and thin films) plays a critical role in maximizing the amount of absorbed radiation. ===Biomaterials=== fibers of woven bone Many natural (or biological) materials are complex composites with remarkable mechanical properties. These complex structures, which have risen from hundreds of million years of evolution, are inspiring materials scientists in the design of novel materials. Their defining characteristics include structural hierarchy, multifunctionality and self-healing capability. Self-organization is also a fundamental feature of many biological materials and the manner by which the structures are assembled from the molecular level up. Thus, self-assembly is emerging as a new strategy in the chemical synthesis of high performance biomaterials. ==Physical properties== Physical properties of elements and compounds that provide conclusive evidence of chemical composition include odor, color, volume, density (mass per unit volume), melting point, boiling point, heat capacity, physical form and shape at room temperature (solid, liquid or gas; cubic, trigonal crystals, etc.), hardness, porosity, index of refraction and many others. This section discusses some physical properties of materials in the solid state. ===Mechanical=== rock formation in the Chilean Patagonia. Like most inorganic minerals formed by oxidation in the Earth's atmosphere, granite consists primarily of crystalline silica SiO 2 and alumina Al 2 O 3 . The mechanical properties of materials describe characteristics such as their strength and resistance to deformation. For example, steel beams are used in construction because of their high strength, meaning that they neither break nor bend significantly under the applied load. Mechanical properties include elasticity, plasticity, tensile strength, compressive strength, shear strength, fracture toughness, ductility (low in brittle materials) and indentation hardness. Solid mechanics is the study of the behavior of solid matter under external actions such as external forces and temperature changes. A solid does not exhibit macroscopic flow, as fluids do. Any degree of departure from its original shape is called deformation. The proportion of deformation to original size is called strain. If the applied stress is sufficiently low, almost all solid materials behave in such a way that the strain is directly proportional to the stress (Hooke's law). The coefficient of the proportion is called the modulus of elasticity or Young's modulus. This region of deformation is known as the linearly elastic region. Three models can describe how a solid responds to an applied stress: Elasticity – When an applied stress is removed, the material returns to its undeformed state. Viscoelasticity – These are materials that behave elastically, but also have damping. When the applied stress is removed, work has to be done against the damping effects and is converted to heat within the material. This results in a hysteresis loop in the stress–strain curve. This implies that the mechanical response has a time-dependence. Plasticity – Materials that behave elastically generally do so when the applied stress is less than a yield value. When the stress is greater than the yield stress, the material behaves plastically and does not return to its previous state. That is, irreversible plastic deformation (or viscous flow) occurs after yield that is permanent. Many materials become weaker at high temperatures. Materials that retain their strength at high temperatures, called refractory materials, are useful for many purposes. For example, glass-ceramics have become extremely useful for countertop cooking, as they exhibit excellent mechanical properties and can sustain repeated and quick temperature changes up to 1000 °C. In the aerospace industry, high performance materials used in the design of aircraft and/or spacecraft exteriors must have a high resistance to thermal shock. Thus, synthetic fibers spun out of organic polymers and polymer/ceramic/metal composite materials and fiber-reinforced polymers are now being designed with this purpose in mind. ====Opto-electronic==== A solar cell or photovoltaic cell is a device that converts light energy into electrical energy. Fundamentally, the device needs to fulfill only two functions: photo-generation of charge carriers (electrons and holes) in a light-absorbing material, and separation of the charge carriers to a conductive contact that will transmit the electricity (simply put, carrying electrons off through a metal contact into an external circuit). This conversion is called the photoelectric effect, and the field of research related to solar cells is known as photovoltaics. Solar cells have many applications. They have long been used in situations where electrical power from the grid is unavailable, such as in remote area power systems, Earth-orbiting satellites and space probes, handheld calculators, wrist watches, remote radiotelephones and water pumping applications. More recently, they are starting to be used in assemblies of solar modules (photovoltaic arrays) connected to the electricity grid through an inverter, that is not to act as a sole supply but as an additional electricity source. All solar cells require a light absorbing material contained within the cell structure to absorb photons and generate electrons via the photovoltaic effect. The materials used in solar cells tend to have the property of preferentially absorbing the wavelengths of solar light that reach the earth surface. Some solar cells are optimized for light absorption beyond Earth's atmosphere, as well. ==Fields of study== ===Solid-state physics=== ===Solid-state chemistry=== ===Materials science=== ==References==

Structured factual content from Wikidata, released under CC0.