{
  "id": "solid-state-drive-056078-e82d5cf274e0a31b",
  "slug": "solid-state-drive",
  "title": "solid-state drive",
  "qid": "Q487343",
  "lead": "256GB PC SN7100s 256GB NVMe Solid-state drive Atlas 240GB mSATA Solid-state drive NV2 2TB NVMe Solid-state drive BG6) A solid-state drive (SSD) is a type of solid-state storage device that uses integrated circuits to store data persistently. It is sometimes called semiconductor storage device, solid-state device, or solid-state disk. Etymologically, \"solid-state drive\" partly refers to existing data storage devices like tape drives and hard disk drives, which all use a mechanically driven storage medium. SSDs rely on non-volatile memory, typically NAND flash, to store data in memory cells. The performance and endurance of SSDs vary depending on the number of bits stored per cell, ranging from high-performing single-level cells (SLC) to more affordable but slower quad-level cells (QLC). In addition to flash-based SSDs, other technologies such as 3D XPoint offer faster speeds and higher endurance through different data storage mechanisms. Unlike traditional hard disk drives (HDDs), SSDs have no moving parts, allowing them to deliver faster data access speeds, reduced latency, increased resistance to physical shock, lower power consumption, and silent operation. Often interfaced to a system in the same way as HDDs, SSDs are used in a variety of devices, including personal computers, enterprise servers, and mobile devices.…",
  "body": "256GB PC SN7100s 256GB NVMe Solid-state drive Atlas 240GB mSATA Solid-state drive NV2 2TB NVMe Solid-state drive BG6) A solid-state drive (SSD) is a type of solid-state storage device that uses integrated circuits to store data persistently. It is sometimes called semiconductor storage device, solid-state device, or solid-state disk. Etymologically, \"solid-state drive\" partly refers to existing data storage devices like tape drives and hard disk drives, which all use a mechanically driven storage medium. SSDs rely on non-volatile memory, typically NAND flash, to store data in memory cells. The performance and endurance of SSDs vary depending on the number of bits stored per cell, ranging from high-performing single-level cells (SLC) to more affordable but slower quad-level cells (QLC). In addition to flash-based SSDs, other technologies such as 3D XPoint offer faster speeds and higher endurance through different data storage mechanisms. Unlike traditional hard disk drives (HDDs), SSDs have no moving parts, allowing them to deliver faster data access speeds, reduced latency, increased resistance to physical shock, lower power consumption, and silent operation. Often interfaced to a system in the same way as HDDs, SSDs are used in a variety of devices, including personal computers, enterprise servers, and mobile devices. However, SSDs are generally more expensive on a per-gigabyte basis and have a finite number of write cycles, which can lead to data loss over time. Despite these limitations, SSDs are increasingly replacing HDDs, especially in performance-critical applications and as primary storage in many consumer devices. SSDs come in various form factors and interface types, including SATA, PCIe, and NVMe, each offering different levels of performance. Hybrid storage solutions, such as solid-state hybrid drives (SSHDs), combine SSD and HDD technologies to offer improved performance at a lower cost than pure SSDs. The basic parameter for determining the lifespan of Flash-NAND systems is the number of programming-erase (P/E) cycles. The TBW parameter is the product of the P/E cycle resource and the SSD capacity. For an SSD with a capacity of 1 TB and TBW = 600 TB, the number of P/E cycles is 600. Recovering data from SSDs presents challenges due to the non-linear and complex nature of data storage in solid-state drives. The internal operations of SSDs vary by manufacturer, with commands (e.g. TRIM and the ATA Secure Erase) and programs (e.g. hdparm) being able to erase and modify the bits of a deleted file. ===Reliability metrics=== The JEDEC Solid State Technology Association (JEDEC) has established standards for SSD reliability metrics, which include: Unrecoverable Bit Error Ratio (UBER) Terabytes Written (TBW) – the total number of terabytes that can be written to a drive within its warranty period Drive Writes Per Day (DWPD) – the number of times the full capacity of the drive can be written to per day within its warranty period ===Hard-drive cache=== In 2011, Intel introduced a caching mechanism for their Z68 chipset (and mobile derivatives) called Smart Response Technology, which allows a SATA SSD to be used as a cache (configurable as write-through or write-back) for a conventional, magnetic hard disk drive. A similar technology is available on HighPoint's RocketHybrid PCIe card. Solid-state hybrid drives (SSHDs) are based on the same principle, but integrate some amount of flash memory on board of a conventional drive instead of using a separate SSD. The flash layer in these drives can be accessed independently from the magnetic storage by the host using ATA-8 commands, allowing the operating system to manage it. For example, Microsoft's ReadyDrive technology explicitly stores portions of the hibernation file in the cache of these drives when the system hibernates, making the subsequent resume faster. Dual-drive hybrid systems are combining the usage of separate SSD and HDD devices installed in the same computer, with overall performance optimization managed by the computer user, or by the computer's operating system software. Examples of this type of system are bcache and dm-cache on Linux, and Apple's Fusion Drive. ==Architecture and function== The primary components of an SSD are the controller and the memory used to store data. Traditionally, early SSDs used volatile DRAM for storage, but since 2009, most SSDs utilize non-volatile NAND flash memory, which retains data even when powered off. Flash memory SSDs store data in metal–oxide–semiconductor (MOS) integrated circuit chips, using non-volatile floating-gate memory cells. ===Controller=== Every SSD includes a controller, which manages the data flow between the NAND memory and the host computer. The controller is an embedded processor that runs firmware to optimize performance, managing data, and ensuring data integrity. Some of the primary functions performed by the controller are: Bad block mapping Read and write caching Encryption Crypto-shredding Error detection and correction using error-correcting code (ECC), such as BCH code Garbage collection Read scrubbing and management of read disturb Wear leveling Management of flash memory refresh and data retention Thermal detection and management The overall performance of an SSD can scale with the number of parallel NAND chips and the efficiency of the controller. For example, controllers that enable parallel processing of NAND flash chips can improve bandwidth and reduce latency. The number of flash memory channel increases, the delay of raw flash memory (such as ONFI based NAND flash) decreases, and the bandwidth of raw flash memory increases. Micron and Intel pioneered faster SSDs by implementing techniques such as data striping and interleaving to enhance read/write speeds. More recently, SandForce introduced controllers that incorporate data compression to reduce the amount of data written to the flash memory, potentially increasing both performance and endurance. ====Wear leveling==== Wear leveling is a technique used in SSDs to ensure that write and erase operations are distributed evenly across all blocks of the flash memory. Without this, specific blocks could wear out prematurely due to repeated use, reducing the overall lifespan of the SSD. The process moves data that is infrequently changed (cold data) from heavily used blocks, so that data that changes more frequently (hot data) can be written to those blocks. This helps distribute wear more evenly across the entire SSD. However, this process introduces additional writes, known as write amplification, which must be managed to balance performance and durability. ===Memory=== ====Flash memory==== Most SSDs use non-volatile NAND flash memory for data storage, primarily due to its cost-effectiveness and ability to retain data without a constant power supply. NAND flash-based SSDs store data in semiconductor cells, with the specific architecture influencing performance, endurance, and cost. There are various types of NAND flash memory, categorized by the number of bits stored in each cell: Single-Level Cell (SLC): Stores 1 bit per cell. SLC provides the highest performance, reliability, and endurance but is more expensive. Multi-Level Cell (MLC): Stores 2 bits per cell. MLC offers a balance between cost, performance, and endurance. Triple-Level Cell (TLC): Stores 3 bits per cell. TLC is less expensive but slower and less durable than SLC and MLC. Quad-Level Cell (QLC): Stores 4 bits per cell. QLC is the most affordable option but has the lowest performance and endurance. Over time, SSD controllers have improved the efficiency of NAND flash, incorporating techniques such as interleaved memory, advanced error correction, and wear leveling to optimize performance and extend the lifespan of the drive. Lower-end SSDs often use QLC or TLC memory, while higher-end drives for enterprise or performance-critical applications may use MLC or SLC. In addition to the flat (planar) NAND structure, many SSDs now use 3D NAND (or V-NAND), where memory cells are stacked vertically, increasing storage density while improving performance and reducing costs. ====DRAM and DIMM==== Some SSDs use volatile DRAM instead of NAND flash, offering very high-speed data access but requiring a constant power supply to retain data. DRAM-based SSDs are typically used in specialized applications where performance is prioritized over cost or non-volatility. Many SSDs, such as NVDIMM devices, are equipped with backup power sources such as internal batteries or external AC/DC adapters. These power sources ensure data is transferred to a backup system (usually NAND flash or another storage medium) in the event of power loss, preventing data corruption or loss. Similarly, ULLtraDIMM devices use components designed for DIMM modules, but only use flash memory, similar to a DRAM SSD. DRAM-based SSDs are often used for tasks where data must be accessed at high speeds with low latency, such as in high-performance computing or certain server environments. ====3D XPoint==== 3D XPoint is a type of non-volatile memory technology developed by Intel and Micron, announced in 2015. It operates by changing the electrical resistance of materials in its cells, offering much faster access times than NAND flash. 3D XPoint-based SSDs, such as Intel's Optane drives, provide lower latency and higher endurance than NAND-based drives, although they are more expensive per gigabyte. ====Other==== Drives known as hybrid drives or solid-state hybrid drives (SSHDs) use a hybrid of spinning disks and flash memory. Some SSDs use magnetoresistive random-access memory (MRAM) for storing data. ==Configurations== The size and shape of any device are largely driven by the size and shape of the components used to make that device. Traditional HDDs and optical drives are designed around the rotating platter(s) or optical disc along with the spindle motor inside. Since an SSD is made up of various interconnected integrated circuits (ICs) and an interface connector, its shape is no longer limited to the shape of rotating media drives. The lack of moving parts and light weight meant that an SSD can have no shell and simply appear in the shape of a plug-in board. On the other end of the size spectrum, some solid-state storage solutions come in a larger chassis that may even be a rack-mount form factor with numerous SSDs inside. They would all connect to a common bus inside the chassis and connect outside the box with a single connector. For general computer use, the 2.5-inch form factor (typically found in laptops and used for most SATA SSDs) was the most popular in the 2010s, in three thicknesses (7.0mm, 9.5mm, 14.8 or 15.0mm; with 12.0mm also available for some models). For desktop computers with 3.5-inch hard disk drive slots, a simple adapter plate can be used to make such a drive fit. Other types of form factors are more common in enterprise applications. An SSD can also be completely integrated in the other circuitry of the device, as in the Apple MacBook Air (starting with the fall 2010 model). , mSATA and M.2 form factors also gained popularity, primarily in laptops. ===Standard HDD form factors=== The benefit of using a current HDD form factor would be to take advantage of the extensive infrastructure already in place to mount and connect the drives to the host system. These traditional form factors are known by the size of the rotating media (i.e., 5.25-inch, 3.5-inch, 2.5-inch or 1.8-inch) and not the dimensions of the drive casing. ====Disk-on-a-module form factors==== A disk-on-a-module (DOM) is a flash drive with either 40/44-pin Parallel ATA (PATA) or SATA interface, intended to be plugged directly into the motherboard and used as a computer hard disk drive (HDD). DOM devices emulate a traditional hard disk drive, resulting in no need for special drivers or other specific operating system support. DOMs are usually used in embedded systems, which are often deployed in harsh environments where mechanical HDDs would simply fail, or in thin clients because of small size, low power consumption, and silent operation. SATA DOMs come in several forms. The most traditional emulates the standard interface, with the 7-pin SATA data connector placed beside the 15-pin SATA power connector. An example is the \"half-slim SATA\" MO-297 size standard. To save board space, smaller SATA DOMs were made that only use the SATA data connector. The earliest type, made by e.g. Supermicro, relied on a separate Berg connector to deliver power. A second type of 2012, made by Innodisk, repurposes the 7th pin of the connector from GND to VCC (+5V). A third type called \"pin 8 power\" replaces the two plastic structural elements on the sides with two metal contacts for GND and VCC. These new types of SATADOMs are now so popular that the older 7+15-pin type is virtually not considered to be \"SATADOMs\" any more, especially as few motherboards provide such an interface. (PATA DOMs have no power concern as the connector supplies 3.3V or 5V power: the same way a CompactFlash would get its power.) There are also USB DOMs designed to be plugging into the USB 2.0 header pins on a motherboard. DOM storage capacities range from 4&nbsp;MB to 128&nbsp;GB with different variations in physical layouts, including vertical or horizontal orientation. ===Standard small card form factors=== For applications where space is at a premium, like for ultrabooks or tablet computers, a few compact form factors were standardized for flash-based SSDs. There is the mSATA form factor, which uses the PCI Express Mini Card physical layout. It remains electrically compatible with the PCI Express Mini Card interface specification while requiring an additional connection to the SATA host controller through the same connector. A higher-performance SSD may use the Mini-PCIe to access the PCIe bus directly. M.2 form factor, formerly known as the Next Generation Form Factor (NGFF), is a natural transition from the mSATA and physical layout it used, to a more usable and more advanced form factor. While mSATA took advantage of an existing form factor and connector, M.2 has been designed to maximize usage of the card space, while minimizing the footprint. The M.2 standard allows both SATA and PCI Express SSDs to be fitted onto M.2 modules. ===Ball grid array form factors=== In the early 2000s, a few companies introduced SSDs in Ball Grid Array (BGA) form factors, such as M-Systems' (now SanDisk) DiskOnChip and Silicon Storage Technology's NANDrive (now produced by Greenliant Systems), and Memoright's M1000 for use in embedded systems. The main benefits of BGA SSDs are their low power consumption, small chip package size to fit into compact subsystems, and that they can be soldered directly onto a system motherboard to reduce adverse effects from vibration and shock. Such embedded drives now often adhere to the eMMC and eUFS standards. ===Form factors with nonstandard connectors=== ====Board/card==== The flexibility of the SSD also allows for many unusual form factors, some of which had been important in its early adoption in PCs. For example, the SATADIMM from Viking Technology uses an empty DDR3 DIMM slot on the motherboard to provide power to the SSD with a separate SATA connector to provide the data connection back to the computer. The result is an easy-to-install SSD with a capacity equal to drives that typically take a full 2.5-inch drive bay. ==Development and history== and storage ===Early SSDs using RAM and similar technology=== The first devices resembling solid-state drives (SSDs) used semiconductor technology, with an early example being the 1978 StorageTek STC 4305. This device was a plug-compatible replacement for the IBM 2305 hard drive, initially using charge-coupled devices for storage and later switching to dynamic random-access memory (DRAM). The STC 4305 was significantly faster than its mechanical counterparts and cost around $400,000 for a 45&nbsp;MB capacity. Though early SSD-like devices existed, they were not widely used due to their high cost and small storage capacity. In the late 1980s, companies like Zitel began selling DRAM-based SSD products under the name \"RAMDisk\". These devices were primarily used in specialized systems like those made by UNIVAC and Perkin-Elmer. ===SSDs using Flash=== Flash memory, a key component in modern SSDs, was invented in 1980 by Fujio Masuoka at Toshiba. Flash-based SSDs were patented in 1989 by the founders of SanDisk, which released its first product in 1991: a 20&nbsp;MB SSD for IBM laptops. While the storage capacity was limited and the price high (around $1,000), this marked the beginning of a transition to flash memory as an alternative to traditional hard drives. In the 1990s, new manufacturers of flash memory drives emerged, including STEC, Inc., M-Systems, and BiTMICRO. As the technology advanced, SSDs saw dramatic improvements in capacity, speed, and affordability. By 2016, commercially available SSDs had more capacity than the largest available HDDs. By 2018, flash-based SSDs had reached capacities of up to 100&nbsp;TB in enterprise products, with consumer SSDs offering up to 16&nbsp;TB. These advancements were accompanied by significant increases in read and write speeds, with some high-end consumer models reaching speeds of up to 14.5&nbsp;GB/s. In 2021, NVMe 2.0 with Zoned Namespaces (ZNS) was announced. ZNS allows data to be mapped directly to its physical location in memory, providing direct access on an SSD without a flash translation layer. In 2024, Samsung announced what it called the world's first SSD with a hybrid PCIe interface, the Samsung 990 EVO. The hybrid interface runs in either the x4 PCIe 4.0 or x2 PCIe 5.0 modes, a first for an M.2 SSD. SSD prices have also fallen dramatically, with the cost per gigabyte decreasing from around $50,000 in 1991 to less than $0.05 by 2020. ===Enterprise flash drives=== Enterprise flash drives (EFDs) are designed for high-performance applications requiring fast input/output operations per second (IOPS), reliability, and energy efficiency. EFDs often have higher specifications than consumer SSDs, making them suitable for mission-critical applications. The term was first used by EMC in 2008 to describe SSDs built for enterprise environments. One example of an EFD is the Intel DC S3700 series, launched in 2012. These drives were notable for their consistent performance, maintaining IOPS variation within a narrow range, which is crucial for enterprise environments. Another significant product is the Toshiba PX02SS series, launched in 2016. Designed for write-intensive applications like online transaction processing, these drives achieved impressive read and write speeds and high endurance ratings. ===Drives using other persistent memory technologies=== In 2017, Intel introduced SSDs based on 3D XPoint technology under the Optane brand. Unlike NAND flash, 3D XPoint uses a different method to store data, offering higher IOPS performance, although sequential read and write speeds remain slower compared to traditional SSDs. ===Sales=== SSD shipments were approximately 11 million units in 2009, rising to 17.3 million units in 2011 for a total market value of US$5 billion. Shipments continued to grow to 39 million units in 2012 and were projected to reach 83 million units in 2013, 201.4 million units in 2016, and 227 million units in 2017. Tom's Hardware, citing a 2024 analysis from Yole Group, projected that SSD revenues will rise from USD 29 billion in 2022 to USD 67 billion by 2028. The global solid-state drive (SSD) market is projected to grow significantly between 2024 and 2030, driven by rising demand for data center expansion, cloud computing services, and consumer electronics upgrades. In a 2024 report, Grand View Research estimated the SSD market at USD 19.1 billion in 2023 and projected it to reach USD 55.1 billion by 2030. In a separate 2024 study, Mordor Intelligence valued the market at USD 63.45 billion for 2024, forecasting growth to USD 172.82 billion by 2030. ==File-system support== The same file systems used on hard disk drives can typically also be used on solid state drives. File systems that support SSDs generally also support the TRIM command, which helps the SSD to recycle discarded data. The file system does not need to manage wear leveling or other flash memory characteristics, as they are handled internally by the SSD. Some log-structured file systems (e.g. F2FS, JFFS2) help to reduce write amplification on SSDs, especially in situations where only very small amounts of data are changed, such as when updating file-system metadata. If an operating system does not support using TRIM on discrete swap partitions, it might be possible to use swap files inside an ordinary file system instead. For example, macOS does not support swap partitions; it only swaps to files within a file system, so it can use TRIM when, for example, swap files are deleted. === Linux=== Since 2010, standard Linux drive utilities have taken care of appropriate partition alignment by default. Kernel support for the TRIM operation was introduced in version 2.6.33 of the Linux kernel mainline, released on 24 February 2010. The ext4, Btrfs, XFS, JFS, and F2FS file systems include support for the discard (TRIM or UNMAP) function. Non-native file systems such as exFAT and NTFS-3G also support TRIM. To automatically make use of TRIM on file deletion, a file system must be mounted using the discard parameter. Linux swap partitions are by default performing discard operations when the underlying drive supports TRIM, with the possibility to turn them off. Support for queued TRIM, a SATA 3.1 feature that results in TRIM commands not disrupting the command queues, was introduced in Linux kernel 3.12, released on November 2, 2013. An alternative to the kernel-level TRIM operation is to use a user-space utility called that goes through all of the unused blocks in a filesystem and dispatches TRIM commands for those areas. The utility is usually run by cron or systemd as a scheduled task. A filesystem that supports TRIM remains required. Whether formatting or resizing trims the unused space depends on the implementation. For example, the program for formatting ext2/3/4 defaults to issuing a TRIM command (if supported) to the entire block, but the program for resizing ext2/3/4 does not TRIM the space left unused after shrinking. TRIM-after-resize is instead done by or , programs that edit the partition table. In addition, bcache is designed to have an SSD act as a read/write cache for a slower drive such as an HDD. ===macOS=== Versions since Mac OS X 10.6.8 (Snow Leopard) support TRIM but only when used with an Apple-purchased SSD. TRIM is not automatically enabled for third-party drives, except for external removable SSDs, although it can be enabled by using third-party utilities such as Trim Enabler. The status of TRIM can be checked in the System Information application or in the system_profiler command-line tool. Versions since OS X 10.10.4 (Yosemite) include sudo trimforce enable as a Terminal command that enables TRIM on non-Apple SSDs. There is also a technique to enable TRIM in versions earlier than Mac OS X 10.6.8, although it remains uncertain whether TRIM is actually utilized properly in those cases. ===Microsoft Windows=== Prior to Windows 7, Microsoft Windows did not take any specific measures to support solid state drives. From Windows&nbsp;7, the standard NTFS file system provides support for the TRIM command. By default, Windows&nbsp;7 and newer versions execute TRIM commands automatically if the device is detected to be a solid-state drive and the filesystem driver supports TRIM (NTFS or ReFS). However, because TRIM irreversibly resets all freed space, it may be desirable to disable support where enabling data recovery is preferred over wear leveling. Windows implements TRIM for more than just file-delete operations. The TRIM operation is integrated with partition- and volume-level commands such as format and delete, with file-system commands relating to truncate and compression, and with the System Restore (also known as Volume Snapshot) feature. Defragmentation should be disabled on solid-state drives because the location of the file components on an SSD does not significantly impact its performance, but moving the files to make them contiguous using the Windows Defrag routine will cause unnecessary write wear on the limited number of write cycles on the SSD. The SuperFetch feature will also not materially improve performance and causes additional overhead in the system and SSD. Since Windows 8.1, the Windows Defrag routine would instead \"retrim\" (TRIM) partitions detected as SSDs. ====Windows Vista==== Windows Vista generally expects hard disk drives rather than SSDs. Windows Vista includes ReadyBoost to exploit characteristics of USB-connected flash devices, but for SSDs it only improves the default partition alignment to prevent read-modify-write operations that reduce the speed of SSDs. Most SSDs are typically split into 4&nbsp;KiB sectors, while earlier systems may be based on 512&nbsp;byte sectors with their default partition setups unaligned to the 4&nbsp;KiB boundaries. Windows Vista does not send the TRIM command to solid-state drives, but some third-party utilities such as SSD Doctor will periodically scan the drive and TRIM the appropriate entries. ====Windows 7==== Windows&nbsp;7 and later versions have native support for SSDs. The operating system detects the presence of an SSD and optimizes operation accordingly. For SSD devices, Windows 7 disables ReadyBoost and automatic defragmentation. Despite the initial statement by Steven Sinofsky before the release of Windows 7, however, defragmentation is not disabled, even though its behavior on SSDs differs. One reason is the low performance of Volume Shadow Copy Service on fragmented SSDs. The second reason is to avoid reaching the practical maximum number of file fragments that a volume can handle. Windows 7 also includes support for the TRIM command to reduce garbage collection for data that the operating system has already determined is no longer valid. ====Windows 8.1 and later==== Windows 8.1 and later Windows systems also support automatic TRIM for PCI Express SSDs based on NVMe. For Windows 7, the KB2990941 update is required for this functionality and needs to be integrated into Windows Setup using DISM if Windows 7 has to be installed on the NVMe SSD. Windows 8/8.1 also supports the SCSI unmap command, an analog of SATA TRIM, for USB-attached SSDs or SATA-to-USB enclosures. It is also supported over USB Attached SCSI Protocol (UASP). While Windows 7 supported automatic TRIM for internal SATA SSDs, Windows 8.1 and above support manual TRIM as well as automatic TRIM for SATA, NVMe and USB-attached SSDs. Manual TRIM is accessed through the expanded Windows Defrag utility. ===ZFS=== Solaris as of version 10 Update 6 (released in October 2008), and recent versions of OpenSolaris, Solaris Express Community Edition, Illumos, Linux with ZFS on Linux, and FreeBSD all can use SSDs as a performance booster for ZFS. A low-latency SSD can be used for the ZFS Intent Log (ZIL), where it is named the SLOG. An SSD may also be used for the level 2 Adaptive Replacement Cache (L2ARC), which is used to cache data for reading. ===FreeBSD=== ZFS for FreeBSD introduced support for TRIM on September 23, 2012. The Unix File System also supports the TRIM command. ==Standardization organizations== The following are noted standardization organizations and bodies that work to create standards for solid-state drives (and other computer storage devices). The table below also includes organizations which promote the use of solid-state drives. This is not necessarily an exhaustive list. ==Gallery== ==See also== Board solid-state drive Dynamic random-access memory Flash Core Module Hard disk drive List of flash memory controller manufacturers List of solid-state drive manufacturers RAID RAM drive ==References== ==Further reading== \"Solid-state revolution: in-depth on how SSDs really work\". Lee Hutchinson. Ars Technica. June 4, 2012. Mai Zheng, Joseph Tucek, Feng Qin, Mark Lillibridge, \"Understanding the Robustness of SSDs under Power Fault\", FAST'13 Cheng Li, Philip Shilane, Fred Douglis, Hyong Shim, Stephen Smaldone, Grant Wallace, \"Nitro: A Capacity-Optimized SSD Cache for Primary Storage\", USENIX ATC'14 ==External links== JEDEC Continues SSD Standardization Efforts Linux & NVM: File and Storage System Challenges (PDF) Linux and SSD Optimization Understanding the Robustness of SSDs under Power Fault (USENIX 2013, by Mai Zheng, Joseph Tucek, Feng Qin and Mark Lillibridge) Current list of SSDs, including benchmark tests",
  "categories": [
    "100874652",
    "115988497",
    "21493616",
    "22903402",
    "22905114",
    "22921997",
    "22924369",
    "22948236",
    "22949361",
    "22969343",
    "22985424",
    "22986691",
    "23117742",
    "23118434",
    "23149714",
    "23507682",
    "23579438",
    "23603337",
    "24623845",
    "24685377",
    "24745122",
    "24745126",
    "28179171",
    "28269686",
    "28493674",
    "37645845",
    "62259234",
    "62259235",
    "8733168"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1378640526",
  "content_hash": "e82d5cf274e0a31b1b49f43177c360c099f32b8ea457a49820b6fa58062a91d5",
  "created_at": 1792308729.6206849,
  "updated_at": 1791192483.0,
  "claims": [
    {
      "id": 31727825,
      "subject_qid": "",
      "subject_slug": "solid-state-drive",
      "predicate": "date of establishment",
      "object_text": "2011",
      "object_num": 20110000.0,
      "object_unit": null,
      "polarity": 1,
      "qualifier": "",
      "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1378640526",
      "source_name": "Wikipedia",
      "source_tier": 3,
      "retrieved_at": 1792509519.8868682,
      "confidence": 0.95,
      "article_slug": "solid-state-drive",
      "span_start": 83,
      "span_end": 134
    },
    {
      "id": 31727826,
      "subject_qid": "",
      "subject_slug": "solid-state-drive",
      "predicate": "release date",
      "object_text": "1991",
      "object_num": 19910000.0,
      "object_unit": null,
      "polarity": 1,
      "qualifier": "",
      "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1378640526",
      "source_name": "Wikipedia",
      "source_tier": 3,
      "retrieved_at": 1792509519.8868692,
      "confidence": 0.95,
      "article_slug": "solid-state-drive",
      "span_start": 73,
      "span_end": 121
    },
    {
      "id": 31727827,
      "subject_qid": "",
      "subject_slug": "solid-state-drive",
      "predicate": "release date",
      "object_text": "2010-02-24",
      "object_num": 20100224.0,
      "object_unit": null,
      "polarity": 1,
      "qualifier": "",
      "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1378640526",
      "source_name": "Wikipedia",
      "source_tier": 3,
      "retrieved_at": 1792509519.8868697,
      "confidence": 0.95,
      "article_slug": "solid-state-drive",
      "span_start": 101,
      "span_end": 130
    },
    {
      "id": 31727828,
      "subject_qid": "",
      "subject_slug": "solid-state-drive",
      "predicate": "release date",
      "object_text": "2013-11-02",
      "object_num": 20131102.0,
      "object_unit": null,
      "polarity": -1,
      "qualifier": "",
      "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1378640526",
      "source_name": "Wikipedia",
      "source_tier": 3,
      "retrieved_at": 1792509519.88687,
      "confidence": 0.95,
      "article_slug": "solid-state-drive",
      "span_start": 146,
      "span_end": 175
    },
    {
      "id": 31727829,
      "subject_qid": "",
      "subject_slug": "solid-state-drive",
      "predicate": "release date",
      "object_text": "2008",
      "object_num": 20080000.0,
      "object_unit": null,
      "polarity": 1,
      "qualifier": "",
      "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1378640526",
      "source_name": "Wikipedia",
      "source_tier": 3,
      "retrieved_at": 1792509519.8868704,
      "confidence": 0.95,
      "article_slug": "solid-state-drive",
      "span_start": 45,
      "span_end": 93
    }
  ],
  "contradictions": [],
  "confidence": 0.95,
  "csl": {
    "id": "solid-state-drive-056078-e82d5cf274e0a31b",
    "type": "webpage",
    "title": "solid-state drive",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/solid-state-drive",
    "issued": {
      "date-parts": [
        [
          2026,
          10,
          18
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          21
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:solid-state-drive-056078-e82d5cf274e0a31b",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1378640526",
    "note": "Immutable snapshot solid-state-drive-056078-e82d5cf274e0a31b, content root e82d5cf274e0a31b…"
  }
}