Lesson plan

SpaceCub

SpaceCub was a design project for a homebuilt rocket. Between 1993 and 1994, Geoffrey A. Landis proposed that a vehicle designed to launch to the edge of space might be a feasible project for a "personal" spaceship, the equivalent of a Piper Cub for space. The insight was that a flight to "only" 100 km would reach the officially defined edge of space, and even though this is much easier a challenge than an orbital flight, such a suborbital flight would be of excitement to the public, and the pilot would be officially qualified as an astronaut. A small group of rocket enthusiasts, computer hobbyists, and science-fiction writers gathered together to do a preliminary design, with the ultimate goal of moving on to building a prototype, with (then) physics student David Burkhead leading the technical effort. The vehicle design was discussed in many venues, and presentations on the design progress were given in several conferences, such as the 1995 NSS International Space Development Conference, where it attracted considerable popular attention. The design was featured in print in places including the December 1994 Popular Mechanics, and the Brazilian popular magazine Istoé.…

Back to article

Article summary

SpaceCub was a design project for a homebuilt rocket. Between 1993 and 1994, Geoffrey A. Landis proposed that a vehicle designed to launch to the edge of space might be a feasible project for a "personal" spaceship, the equivalent of a Piper Cub for space. The insight was that a flight to "only" 100 km would reach the officially defined edge of space, and even though this is much easier a challenge than an orbital flight, such a suborbital flight would be of excitement to the public, and the pilot would be officially qualified as an astronaut. A small group of rocket enthusiasts, computer hobbyists, and science-fiction writers gathered together to do a preliminary design, with the ultimate goal of moving on to building a prototype, with (then) physics student David Burkhead leading the technical effort. The vehicle design was discussed in many venues, and presentations on the design progress were given in several conferences, such as the 1995 NSS International Space Development Conference, where it attracted considerable popular attention. The design was featured in print in places including the December 1994 Popular Mechanics, and the Brazilian popular magazine Istoé.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.